• Advances in aircraft and spacecraft science
• /
• v.6 no.4
• /
• pp.283-296
• /
• 2019

The influence of different planform parameters on the aerodynamic performance of large-scale subsonic and transonic Blended Wing Body (BWB) aircraft have gained comprehensive research in the recent years, however, it is not the case for small-size low subsonic speed Unmanned Aerial Vehicles (UAVs). The present work numerically investigates aerodynamics governing four different trailing edge geometries characterizing BWB configurations in standard flight conditions at angles of attack from $-4^{\circ}$ to $22^{\circ}$ to provide generic information that can be essential for making well-informed decisions during BWB UAV conceptual design phase. Simulation results are discussed and comparatively analyzed with useful implications for formulation of proper mission profile specific to every BWB configuration.

• Proceeding of EDISON Challenge
• /
• 2012.04a
• /
• pp.57-60
• /
• 2012

본 연구에서는 현재 국내외에서 연구 중인 Blended Wing Body(BWB) 항공기의 엔진흡기 유동을 해석하기 위해 익형과 비행조건을 변화시켜 가며 전산유체해석을 수행하였다. 엔진의 위치에 따라 엔진이 효율적으로 동작하기 위한 조건인 흡기에서의 유동 속도와 그 분산을 중심으로 해석한 결과 익형 표면에서는 경계층의 영향으로 엔진흡기에서 유동속도가 낮고, 속도분산이 높음을 확인할 수 있었다. 한편, 익형 아랫면에서는 높은 비행속도에서 속도분산이 급격히 증가하였다. 이를 통해, 해석에 사용한 익형이 BWB의 동체로 활용하기에 적합한 엔진흡기조건을 갖는지 판별하였다.

• International Journal of Aeronautical and Space Sciences
• /
• v.9 no.1
• /
• pp.121-128
• /
• 2008

This paper describes the modeling and autopilot design procedure of a Blended Wing-Body(BWB) UAV. The BWB UAV is a tailless design that integrates the wing and the fuselage. This configuration shows some aerodynamic advantages of lower wetted area to volume ratio and lower interference drag as compared to conventional type UAV. Also, BWB UAV may be increase payload capacity and flight range. However, despite of these benefits, this type of UAV presents several problems related to flying qualities, stability, and control. In this paper, the detailed modeling procedure of BWB UAV and stability analysis results using the linearized model at trim condition are represented. Finally, we designed the autopilot of BWB UAV based on a simple control allocation scheme and evaluated its performance through nonlinear simulation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.11
• /
• pp.1066-1072
• /
• 2009

A panel method based on potential flow theory is developed for the steady/unsteady aerodynamic analysis of arbitrary three-dimensional Blended Wing Body aircraft. The panel method uses the piecewise constant source and doublet singularities as a solution. This potential based panel method is founded on the Dirichlet boundary condition and coupled with the time-stepping method. The present method uses the time-stepping loop to simulate the unsteady motion of the aircraft. The present method can solve the three-dimensional flow over the complex bodies with less computing time and provide various aerodynamic derivatives to secure the stability of Blended Wing Body aircraft. That will do much for practical applications such as aerodynamic designs and analysis of aircraft configurations and flight simulation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.6
• /
• pp.422-428
• /
• 2019

A tailless or Blended-Wing-Body(BWB) shaped configuration is highlighted for UCAV with low RCS characteristics. The BWB configuration is characterized by its directional static instability and low controllability. To control the directional movement of the BWB configured vehicle, directional thrust vectoring equipment or drag rudder typed control surfaces which utilize the drag differences of the wing can be considered. This paper deals with a BWB shaped configuration using a spoiler and describes the lateral-directional aerodynamic characteristics of the vehicle. In addition, it is shwon that the lateral-directional motion can be controlled effectively by using the classical PI control structure. This control law is verified by flight test and showed adequate for the tailless BWB shaped UAV.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.554-559
• /
• 2016

본 논문은 EDISON CFD를 사용하여 스포일러가 장착된 무미익 BWB UCAV에 대하여 이차원 유동해석을 수행하였다. 무미익 형상은 일반적인 항공기보다 롤과 요 방향의 안정성과 조성성에 있어 불리한 특징을 갖는데 특히 이 착륙 시 고 받음각의 영역에서 발생하는 Pitch-up 현상이 항공기 안정성에 문제를 야기한다. 수직 미익 부재와 pitch-up 현상으로 인한 BWB형상의 UCAV가 지니는 단점을 보완하기 위해서 스포일러가 장착된 형상이 적용되기도 한다 본 연구에서는 윗면과 아랫면에 스포일러가 장착된 경우에 대해 전산유동해석을 수행하였다. 해석결과 윗면의 스포일러는 양력의 감소와 항력의 증가를 야기했으며, 아랫면의 스포일러는 양력과 항력을 모두 증가시켰다. 피칭모멘트의 경우 아랫면의 스포일러가 저받음각에서 안정성을 증가시켰다.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.2
• /
• pp.290-299
• /
• 2017

Reconfigurable flight control using various kinds of adaptive control methods has been studied since the 1970s to enhance the survivability of aircraft in case of severe in-flight failure. Early studies were mainly focused on the failure of actuators. Recently, studies of reconfigurable flight controls that can accommodate complex damage (partial wing and tail loss) in conventional aircraft were reported. However, the partial wing loss effects on the aerodynamics of conventional type aircraft are quite different to those of BWB(blended wing body) aircraft. In this paper, a reconfigurable flight control algorithm was designed using a direct model reference adaptive method to overcome the instability caused by a complex damage of a BWB aircraft. A model reference adaptive control was incorporated into the inner loop rate control system enhancing the performance of the baseline control to cope with abrupt loss of stability. Gains of the model reference adaptive control were polled out using the Liapunov's stability theorem. Outer loop attitude autopilot was designed to manage roll and pitch of the BWB UAV as well. A 6-DOF dynamic model was built-up, where the normal flight can be made to switch to the damaged state abruptly reflecting the possible real flight situation. 22% of right wing loss as well as 25% loss for both vertical tail and rudder control surface were considered in this study. Static aerodynamic coefficients were obtained via wind tunnel test. Numerical simulations were conducted to demonstrate the performance of the reconfigurable flight control system.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.6
• /
• pp.995-1006
• /
• 2015

Underwater glider, as a new kind of autonomous underwater vehicles, has many merits such as long-range, extended-duration and low costs. The shape of underwater glider is an important factor in determining the hydrodynamic efficiency. In this paper, a high lift to drag ratio configuration, the Blended-Wing-Body (BWB), is used to design a small civilian under water glider. In the parametric geometric model of the BWB underwater glider, the planform is defined with Bezier curve and linear line, and the section is defined with symmetrical airfoil NACA 0012. Computational investigations are carried out to study the hydrodynamic performance of the glider using the commercial Computational Fluid Dynamics (CFD) code Fluent. The Kriging-based genetic algorithm, called Efficient Global Optimization (EGO), is applied to hydrodynamic design optimization. The result demonstrates that the BWB underwater glider has excellent hydrodynamic performance, and the lift to drag ratio of initial design is increased by 7% in the EGO process.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1992.10a
• /
• pp.101-104
• /
• 1992

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.7
• /
• pp.535-543
• /
• 2014

A computational simulation for a nonslender BWB UCAV configuration with rounded leading edge and span of 1.0m was performed to analyze its aerodynamic characteristics. The freestream is 50m/s over -4 to 26 degree A.o.A.s. Reynolds number based on the mean chord length is $1.25{\times}10^6$. 3D multi block hexahedral grids are used which allow good grid quality and ease to capture boundary layer. ${\gamma}-Re_{\theta}$ model as well as $k-{\omega}$ SST model is employed to assess the effect of transition for flow behavior. Drag and lift of the UCAV were well predicted while $C_M$ is under predicted at high angle of attacks and influenced by the turbulence models strongly. After assessing pressure distribution, skin friction lines and velocity field around the UCAV configuration, it was found that transition effect should be considered to enhance the prediction of aerodynamic behavior by a vortical flowfield.