• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.6
• /
• pp.876-887
• /
• 2006

Recently, there have been a large number of remodeling (or renovation) works in old buildings in urban areas. Compared to new buildings, environmental risk might be more significant in such buildings where remodeling works are going on, since some parts of the building may still be in service for people. This study was carried out to investigate the impacts of remodeling works on the indoor air quality (IAQ) of a large building (a 22 stories university library). Indoor air monitoring was conducted during and after the remodeling works every two weeks for a one year period, and target compounds included BTEX, styrene, TVOC, carbonyl compounds such as formaldehyde and acetaldehyde. $CO,\;CO_2,\;PM_{10}$, and $PM_{2.5}$. Overall, the IAQ appeared to be recovered within two months after the remodeling works. However, in some places, concentrations of formaldehyde, toluene, xylene. and ethylbenzene showed higher levels even after works than those during the works. The results indicate that painting, glues and office furnitures are major sources of aromatic VOCs and formaldehyde. Therefore, in order to decrease the concentrations of toxic VOCs, the use of environmental-friendly building materials is strongly recommended during the remodeling works. In addition, IAQ control and management scheme (for example, baking the inside of the building) should be taken into consideration before reopening the buildings.

• Journal of Environmental Health Sciences
• /
• v.43 no.5
• /
• pp.393-400
• /
• 2017

This study was investigated on pH, heavy metals, oils and solvents in 34 surface soil samples and the samples are collected at two times for 17 farmland sites around 7 industrial areas in Northern Gyeonggi Province. As a result of pH for soil contamination monitoring network, the range of pH showed 4.4~8.4 and average was 6.3. The range of pH for Agricultural land around industrial area was 6.7~7.5 and average indicated 7.1 that mostly showed neutral condition in this area. he average concentrations of Cu, Pb, Ni, As and $Cr^{6+}$ are lower than Korea soil contamination worrisome levels at region 1 and the mean levels of farmland from the soil quality monitoring network. The average concentrations of Zn, Cd and Hg didn't exceed the soil contamination worrisome levels at region 1 but slightly higher than the mean levels of farmland from the soil quality monitoring network. The heavy metal levels of all samples are within Korea soil contamination worrisome levels at region 1. The results showed that the detected heavy metal concentrations ranged from N.D. to ~32.7% of Korea soil contamination worrisome levels at region 1. BTEX, TPH, TCE and PCE were not detected in all samples and thus the farmland around the industrial areas were free from oils and solvents contamination.

• Journal of Environmental Science International
• /
• v.14 no.6
• /
• pp.543-553
• /
• 2005

In recent days, photochemical smog due to the rapid industry development and vehicle increasement has become a critical pollutant in the metropolitan area and the number of ozone alarm signal has increased every year. This research was performed to evaluate VOCs emission source characteristics and concentration of VOCs in Daegu. The site average concentration was observed in the following order: industrial area > commercial area > residential area. Most of the VOCs species except toluene showed variations with higher concentration during nighttime, and lower concentration during the daytime. The major VOCs of stationary emission source were BTEX(benzene, toluene, ethylbenzene. xylene) and methylene chloride, trichloroethene and styrene. Also, those of automobile exhaust were toluene and benzene. Also, the major VOCs concentration emited by the vehicle fuel was observed in the following order: gasoline > light oil > liquefied petroleum gas (L.P.G). Correlation coefficients values were estimated between major VOCs such as toluene, ethylbenzene, m,p-xylene, o-xylene. Results showed that correlation coefficient values were significant magnitude above 0.76. Also, there showed highly significant correlations among ethyl benzene, m,p-xylene, and o-xylene concentration(Pearson correlation coefficients, r=0.868-0.982). Calculated correlation coefficients among commercial area,industrial area and residential area were 0.934-0.981, they showed high correlation. There showed highly correlation between stationary emission source and industrial area, compared with commercial area and residential area. Also, calculated correlation coefficients among commercial area, industrial area, residential area and automobile exhaust were 0.732, 0.725, 0.777, respectively.

• Journal of Environmental Science International
• /
• v.28 no.11
• /
• pp.971-981
• /
• 2019

This study evaluated the photocatalytic oxidation efficiency of volatile organic compounds by $Cu_2O-TiO_2$ under visible-light irradiation. $Cu_2O-TiO_2$ was synthesized by an ultrasonic-assisted method. The XRD result indicated successful p-n type photocatalysts. However, no diffraction peaks belonging to $TiO_2$ were observed for the $Cu_2O-TiO_2$. The Uv-vis spectra result revealed that the synthesized $Cu_2O-TiO_2$ can be activated under visible-light irradiation. The FE-TEM/EDS result showed the formation of synthesized nanocomposites in the commercial P25 $TiO_2$, the undoped $TiO_2$, and $Cu_2O-TiO_2$ and componential analysis in the undoped $TiO_2$ and $Cu_2O-TiO_2$. The photocatalytic oxidation efficiencies of benzene, toluene, ethylbenzene, and o-xylene with $Cu_2O-TiO_2$ were higher than those of P25 $TiO_2$ and undoped $TiO_2$. These results indicate that the prepared $Cu_2O-TiO_2$ photocatalyst can be applied effectively to control gaseous BTEX.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.1
• /
• pp.13-21
• /
• 2012

This study reports a surfactant-enhanced in-situ remediation treatment at a test site which is located in a hilly terrain. The leakage oils from a storage tank situated on the top of the hill contaminated soils and groundwater in the lower elevation. Sixteen vertical injection wells (11 m deep) were installed at the top of the hill to introduce 0.1-0.5 vol.% of non-ionic Tween-80 surfactant. The contaminated area that required remediation treatment was about $1,650\;m^2$. Two cycles of injecting surfactant solution followed by water were repeated over approximately 7.5 months: first cycle with 0.5 month of surfactant injection followed by 3 months of water injection, and second cycle with 1 month of surfactant followed by 3 months of water injection. The seasonal fluctuation in groundwater table was also considered in the selection of periods for surfactant and water injection. The results showed that the initial Total Petroleum Hydrocarbon (TPH) concentration of 1,041 mg/kg (maximum 3,605 mg/kg) was reduced significantly down to 76.6 mg/kg in average. After 2nd surfactant injection process finished, average TPH concentration of soils was reduced to 7.5% compared to initial concentration. Also, average BTEX concentration of soils was reduced to 10.8%. This resultes show that the surfactant enhanced in-situ remediation processes can be applicable to LNAPL contaminated site in field scale.

• Journal of Soil and Groundwater Environment
• /
• v.25 no.4
• /
• pp.1-6
• /
• 2020

Recently, ex-situ remediation technologies has been emerging to clean up contaminated soils mainly because the in-situ techniques have limited applicability and technical difficulties in relatively small contaminated sites. Accordingly, implementation of off-site treatment and disposal have been continuously increased in soil remediation and restoration projects in Korea. However, in many cases, reclaimed soil is still not properly recycled or reused. Therefore, there is an urgent need to document the current status of soil management practices in soil remediation projects in the nation. This study presents a survey of soil contamination status and remedial approaches in Korea based on soil cleanup projects completed in 2015 - 2019, and proposes the possible options of the recycling or reusing the reclaimed soils under compliance with related regulations. The results of the soil survey showed soil contamination was most severe in gas stations, industrial facilities, and military areas. The major types of pollution were related to the petroleum-contaminated site (TPH and BTEX) with 77.0% occurrence in all the contaminated sites. The reclaimed soils were mostly reused as a ground filling-up soils in industrial facilities (60.0%) and warehouses (37.0%).

• Analytical Science and Technology
• /
• v.26 no.4
• /
• pp.287-297
• /
• 2013

The optimization of analytical method for the thermal desorption of seven VOCs (volatile organic compounds) by TD-GC/MS (thermal desorption-gas chromatograph-mass spectrometer) with solid phase sorbent tube, and comparative analysis for the determination of VOCs plotted by standard sorbent tubes prepared using both gas phase and liquid phase materials were investigated. The result of paired t-test showed that a liquid phase standard sorbent tube method was in agreement with a gas phase standard sorbent tube method for six species of VOCs including benzene, toluene, ethylbenzene, o-, m-, and p-xylene except for styrene at the significance level (${\alpha}=0.01$), while the 15.6% of difference in response factor between both of gas phase and liquid phase standard plotting for the determination of styrene showed that both methods were significantly different at the significance level. Therefore, the liquid phase standard plotting method was employed to reduce erroneous data for the determination of styrene including BTEX. Under the optimized analytical method by liquid phase standard sorbent tube, recovery was between $100{\pm}5%$ for 7 species of VOCs, reproducibility ranged from 0.3 to 7.7%, and method detection limit (MDL) ranged from $0.01{\mu}g/m^3$ for o-xylene to $0.27{\mu}g/m^3$ for toluene. The optimized standard method was applied to determine VOCs VOCs from indoor air of of dormitory, one bedroom apartment, and a new car.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2005.05a
• /
• pp.201-205
• /
• 2005

미국과 일본 등 많은 나라들이 연안역에 대한 오염총량관리제를 실시하고 있으며 우리나라 역시 90년도 초반부터 환경부와 국립환경연구원에 의하여 4대강을 대상으로 내륙에 대한 지자체 단위의 오염총량관리제가 추진되고 있다. 연안해역에서도 최근 해양오염방지법의 개정으로 특별관리해역 지정 등 특정 연안해역에 영향을 미치는 육역을 포함하는 연안역 통합관리제가 해양수산부에 의하여 추진되고 있다 또한 외국의 사례로서 미국 체사피크만에서는 오염총량관리제를 포함하는 연안역 통합관리제 수립 및 운용을 위하여 GIS 및 모델 package로 구성된 시스템을 구축 활용하고 있으며, 이런 GIS 및 모델 package로 구성된 시스템을 바탕으로 연안역 통합관리를 위한 기본적인 자료를 수집 분석하고 정책 수립의 방향을 제시하고 있다. 하지만 우리나라에서는 아직까지 연안역 통합관리를 위한 기초 자료도 많이 부족하고 이런 기초 자료를 토대로한 분석 도구인 GIS-modeling 시스템 개발도 매우 미미한 실정이다. 따라서 본 연구에서는 GIS를 이용하여 오염원의 발생 및 배출부하 산정 과정을 공간적으로 분석하여 환경관리에 응용할 수 있는 방안을 제시하고자 한다. 또한 효율적인 연안의 오염원 관리를 위하여 기존 환경부 및 관련 기환 자료를 활용하여 잠실 수중보에서 한강 하구의 세부 오염원자료를 수집하여 GIS 기반의 오염원데이터베이스를 구축하고, 오염부하산정모델을 개발한 후, 구축된 정보의 효율적인 관리와 분석을 위한 GIS 프로그램을 개발하였다. 아울러 육역에서의 오염물질 배출에 따른 연안역 수질의 모의를 통해 육역과 연안역에 대한 효율적인 통합관리방안을 제시하고자 한다.사용될 수 있는 블루투스 서비스와 서비스 속성을 기술한 XML 문서에서 블루투스 기기에 적합한 내부 정보를 생성하는 생성기를 설계하고 구현을 하였다.보다는 현저히 낮았다. 총 휘발성 유기화합물읜 농도는 실내가 실외 보다 높았다(I/O ratio 2.5). BTEX의 상대적 함량도 실내가 실외보다 높아 실내에도 발생원이 있음을 암시하고 있다. 자료 분석결과 유치원 실내의 벤젠은 실외로부터 유입되고 있었고, 톨루엔, 에틸벤젠, 크실렌은 실외뿐 아니라 실내에서도 발생하고 있었다. 정량한 8개 화합물 각각과 총 휘발성 유기화합물의 스피어만 상관계수는 벤젠을 제외하고는 모두 유의하였다. 이중 톨루엔과 크실렌은 총 휘발성 유기화합물과 좋은 상관성 (톨루엔 0.76, 크실렌, 0.87)을 나타내었다. 이 연구는 톨루엔과 크실렌이 총 휘발성 유기화합물의 좋은 지표를 사용될 있고, 톨루엔, 에틸벤젠, 크실렌 등 많은 휘발성 유기화합물의 발생원은 실외뿐 아니라 실내에도 있음을 나타내고 있다.>10)의 $[^{18}F]F_2$를 얻었다. 결론: $^{18}O(p,n)^{18}F$ 핵반응을 이용하여 친전자성 방사성동위원소 $[^{18}F]F_2$를 생산하였다. 표적 챔버는 알루미늄으로 제작하였으며 본 연구에서 연구된 $[^{18}F]F_2$가스는 친핵성 치환반응으로 방사성동위원소를 도입하기 어려운 다양한 방사성의 약품개발에 유용하게 이용될 수 있을 것이다.었으나 움직임 보정 후 영상을 이용하여 비교한 경우, 결합능 변화가 선조체 영역에서 국한되어 나타나며 그 유의성이 움직임 보정 전에 비하여 낮음을

• Journal of Soil and Groundwater Environment
• /
• v.8 no.3
• /
• pp.37-44
• /
• 2003

Fuel oxygenates, such as Methyl tertiary Butyl Ether (MTBE) is additive in gasoline used to reduce air pollution. Gasoline components and fuel additives can leak: form underground storage tanks. MTBE is far more water soluble than gasoline hydrocarbons like BTEX then it travels at essentially the same velocity as groundwater. MTBE in drinking water causes taste and odor problems. Therefore, the purpose of the this study is to examine the ability of ground tire to sorb MTBE in water. The study consisted of running both batch and column tests to determine the sorption capacity, the required sorption equilibration time, and the flow through utilization efficiency of ground tire. The batch test result indicated that ground tire can attain equilibrium sorption capacities about 0.5 mg of MTBE. The result of column test indicate that ground tire has on the 36% utilization rate. Finally, it is clear that ground tire represented an attractive and relatively inexpensive sorption medium for a MTBE. Authors thought that to determine the economic costs of ground tire utilization, the cost to sorb a given mass of contaminant by ground tire will have to be compared to currently accepted sorption media. The cost comparison will also have to include regeneration and disposal cost.

• Journal of Environmental Science International
• /
• v.12 no.4
• /
• pp.487-496
• /
• 2003

The purpose of this study was to develop the preliminary source fingerprints of volatile organic compounds (VOC). The source categories studied were vehicles, gasoline vapor, gasoline storage tank, coating, dry cleaning and road covering. The source samples were collected using 6L electro-polished stainless steel canisters for about 20 seconds. From this study, the main component emitted from VOC sources in Korea was toluene. The toluene proportion for road covering, vehicles, coating and gasoline vapor were 35, 18, 16 and 5%, respec- tively. The C$_2$-C$\sub$5/ alkane and alkene compounds were mainly emitted from vehicles, gasoline vapor and gasoline storage tank. The main compounds of coating were m/p-xylene(34%), toluene(16%), 1,2,4-TMB(10%) and o-xylene(9%), which are aromatic hydrocarbons. In the case of dry cleaning, nonane(41%), 1,2,4-TMB (22%) and 1,3,5-TMB(13%) were mainly emitted.