• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.52-55
• /
• 2000

The temperature effects of programming speed and endurance characteristics in p-channel flash memory cell have been investigated. In the case of room temperature, the programming speed of p-channel flash memory by using BTB scheme is faster than that by using CHE scheme. However, endurance characteristics with BTB programming scheme is not better than that with CHE programming scheme. In the case of elevated temperature, CHE programming speed is reduced due the gate current degradation but BTB programming speed is enhanced due to the increasing of gate current. Finally, the endurance characteristics of both schemes are improved due to the reduction of gate oxide traps.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.274-275
• /
• 2011

Fault current problems is considered a serious issue in the power system because large fault currents not only cause many side effects to the equipments of power system but also lead to severe problems, such as blackouts. This paper deals with the structural analysis and 3-phase fault current stability of the future Seoul metropolitan power system. The simulation composition and analysis are performed with the 4th KEPCO power supply planning data using PSS/e. Through the results of the simulations, it can be observed that the future Seoul metropolitan system results in a fault current which exceeds the circuit breaker (CB) rate. This unremovable fault current can cause critical damage to power system. To resolve the problem, the algorithm for the application of Voltage Sourced Converter Back-to-Back High Voltage Direct Current (VSC BTB HVDC) is being proposed. where the most suitable location for solving fault current problem in Seoul metropolitan area is being implemented.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.242-243
• /
• 2011

우리나라의 전력 계통은 수도권에 부하가 집중되어 있는 반면에 발전 설비는 비수도권에 위치해서 대규모 북상 조류가 발생한다. 이런 대규모의 장거리 전력 전송은 계통의 안정도를 떨어뜨리고 사고시 전력 계통에 불안정을 야기할 수 있다. 때문에 이를 방지하기 위해 송전전력을 제한하게 되고 그로 인한 혼잡비용이 발생한다. 전압형 BTB(Back-to-Back) HVDC의 경우 유효전력과 무효전력의 독립적인 제어가 가능하므로 전압형 BTB HVDC를 수도권 전력 계통에 투입시켜 무효전력을 보상해줄 수 있다. 무효전력을 보상해주면 수도권으로의 융통전력이 더 증가하게 되고 그로 인한 혼잡비용을 절감시킬 수 있다. 본 논문에서는 PSS/E를 이용하여 전압형 BTB HVDC를 수도권 전력망에 투입하여 융통전력을 계산하고 이를 토대로 탄소세를 고려한 혼잡 비용절감 효과를 알아본다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.04a
• /
• pp.22-24
• /
• 2001

슈퍼스칼라 프로세서에서는 분기 명령의 결과 지연으로 명령의 공급이 중단되는 것을 방지하고 지속적인 파이프라인 처리를 위해서 분기의 결과를 미리 예측하여 명령을 폐치하고 있다. 본 논문에서는 심플스칼라 툴 셋을 사용하여 슈퍼스칼라 프로세서에서 사용되는 대표적인 동적 분기예측 방법 시뮬레이션 환경을 구축한다. 동적 분기예측 방법으로 분기 타겟버퍼(Branch Target Buffer, BTB) 상에서 분기명령의 자기 히스토리에 근거한 BTB 방식과 이전 분기명령의 히스토리와의 상관관계를 고려한 Gshare 분기예측기를 적용 구현한다. 심플스칼라 시뮬레이터에 SPEC95 벤치마크 프로그램을 실행시켜 디자인 파라미터 변화에 따른 분기 예측기의 예측정확도를 실험한다. 또한 BTB와 Gshare 분기예측기를 VHDL로 구현하고 Synopsys 툴을 이용하여 시뮬레이션 및 합성 과정을 거쳐 게이트 크기와 파워 소모량을 측정한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10c
• /
• pp.25-27
• /
• 2001

본 논문에서는 AE32000 프로세서에 적응 가능한 효율적인 분기 예측 기법에 관하여 연구하였다. 실험결과, 내장형 응용분야에서의 비용 효율성이란 측면에, AE32000 프로세서에서는 1비트의 분기 예측기와 한 개의 엔트리를 갖는 BTB(Branch Target Buffer)를 사용하는 것이 가장 적합함을 관찰하였다. 또한, 분기 목적 주소에서 나타나는 LERI 명령을 폴딩하여 분기 손실을 줄이는 방안은, BTB와 LERI 폴딩 유닛을 사용하는 설계에서, 가져오는 성능 향상이 미미함을 확인하였다.

• 전기의세계
• /
• v.58 no.12
• /
• pp.22-25
• /
• 2009

• Journal of Internet Computing and Services
• /
• v.2 no.1
• /
• pp.23-30
• /
• 2001

ILP processors require an accurate branch prediction scheme to achieve higher performance. Two-Level branch predictor has been known to achieve high prediction accuracy. But, when a branch accesses a PHT entry that was, previously updated by other branch, Two-level predictor may cause interferences. Negative interferences among all interferences have a negative effect on performance, since they can cause branch mispredictions. Agree predictor achieve high prediction accuracy by converting negative interferences to positive interferences by adding bias bits to BTB, but negative interferences may occur when bias bit is set incorrectly. This paper presents a new dynamic branch predictor which reduces negative interferences. In the proposed predictor, we attach hit bits to entries in BTB to change bias bit dynamically during the execution time, h a result the proposed scheme improve the accuracy of prediction by reducing negative Interferences effectively, To illustrate the effect of the proposed scheme, we evaluate the performance of this scheme using SPEC92int benchmarks, The results show that the proposed scheme can outperform traditional branch predictors.

• Journal of the Korean Chemical Society
• /
• v.55 no.1
• /
• pp.46-49
• /
• 2011

A highly sensitive and selective extraction-spectrophotometric method has been developed for determination of trace amounts of cimetidine. This method is based on the extraction of cimetidine as an ion pair with bromothymol blue (BTB) into chloroform and measuring its absorbance at 417 nm. The effect of different variables such as pH, concentration of BTB, volume of chloroform and shaking time was investigated. The effect of interfering ions on the extraction was also studied. The calibration curve was linear in the range of 0.25-8 ${\mu}gmL^{-1}$ with correlation coefficient of 0.9997. The detection limit based on 3Sb was 0.14 ${\mu}gmL^{-1}$ and relative standard deviation for 10 replicated measurements of 1.0 and 4.0 ${\mu}gmL^{-1}$ of cimetidine was 3.2 and 1.49%, respectively. The proposed method was applied to the determination of cimetidine in pharmaceutical samples with good recoveries.

• Korean Journal of Veterinary Research
• /
• v.48 no.1
• /
• pp.49-52
• /
• 2008

The trend in the prevalence of bovine tuberculosis (BTB) in Korean dairy cattle was investigated in relation to test programs used between 1961 and 2004, during which a total of 8,961,061 dairy cows were tested and 10,248 confirmed to have BTB. The annual prevalence increased in the late 1960s, then decreased during the 1970s and 1980s, and started to increase again from the late 1990s. It seemed that the prevalence varies according to the different test program used. The prevalence of BTB was higher when the tests were performed with heat-concentrated synthetic medium (HCSM) or purified protein derivative (PPD) tuberculin alone compared to that when using combined HCSM and PPD tuberculin testing.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.331-332
• /
• 2015

Since $20^{th}$ century, along with the rapid industrial advancement, the concentrated urban development in specific large cities have made people migrate to those cities, thus causing problems in the power system stability. In case of Korea, more than 40% of the power system demand comes from the consumers in Seoul Metropolitan area and the rate is expected to increase. With the continuous increase of power demand, in order to meet the demand for system reliability improvement, the power system was multi-looped for reliability enhancement, the problem of fault current happened. In this situation, there are several methods for fault current reduction likes current limiting reactor, replacing circuit breaker, splitting busses, etc. But these methods reached its limit, power system needs more fundamental solutions such as grid segmentation. In this paper, we assume grid segmentation already has been progressed using VSC BTB HVDC. Then, this paper discusses operating point of HVDC in metropolitan area considering loss minimization and handy flow control. The simulation is proceeded on 2027 KEPCO system.