• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.320-320
• /
• 2010

최근 결정질 태양전지에 관한 연구 중, 후면 공정에 대한 연구가 중요시 되고 있으며 local back contact 구조는 후면 공정에 관한 연구 중 가장 많은 연구가 이루어지고 있는 분야이다. 특히 local back contact이 형성하는 BSF의 폭, 깊이, 간격은 태양전지의 전기적 특성 및 광학적 특성을 결정짓는 결정적인 요인중 하나이다. 하지만 local back contact 형성을 위한 실험에는 많은 시간과 노력이 필요하며, 많은 시행착오를 겪어야 한다. 따라서 2차원 modeling 함수를 통한 TCAD simulation으로 실험하기 이전에 local back contact구조의 태양전지를 만들고 SR로 각 파장별 양자효율의 변화와 전기적 특성을 분석하여 최적화된 local back contact 구조를 제시할 것이다.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• v.2 no.2
• /
• pp.96-100
• /
• 2021

The era of mass production of agricultural and dairy systems inevitably causes a huge amount of biowastes during their processes. Modern consumption patterns of the general public also contribute to biowaste formation. Thus, processing biowastes has attracted much attention. The introduced black soldier fly (BSF) (Hermetia illucens) is considered as one of environmentally friendly management options for solving biowaste issues. However, an indigenous species, Ptecticus tenebrifer, is also a powerful decomposer that has been largely neglected. This species can be easily found on biowastes such as manure dump, agricultural wastes, and human food wastes. It can be also easily found in the field. It is even attracted to a food trap. To the best of our knowledge, this is the first ecological study on this species.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.2
• /
• pp.95-101
• /
• 2006

This study was conducted to establish a low-input fertilization technique and increase of fertilization efficiency using the band spotty applicator(1999-2000) during the cultivation of mulching for chinese cabbage(Brassia campestris L.). The obtained results such as nitrogen efficiency, yield and soil improvement after cultivation of chinese cabbage were as follows. The content of $NO_3-N$ in soil increased in band spotty fertilization(BSF) by increasing application rate from the beginning stage to the middle stage. The content of total nitrogen increased but content of organic matter, available phosphate and exchangeable potassium decreased in comparison with the soil before experiment. Growth rate of Chinese cabbage increased in band spotty fertilization plot and uptake amount of nitrogen fertilized for chinese cabbage increased by increasing of the application rate. N use efficiency was higher by 5-21% in band spotty fertilization plot than in conventional fertilization(CF) plot. Yield of chinese cabbage increased by 16% in 70% band spotty fertilization plot and increased by 20% in 100% band spotty fertilization plot. It was found that 70% band spotty fertilization was more effective as fertilization method to reduce both environmental pollution and chemical nitrogen fertilizer in plastic film mulching cultivation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.200-207
• /
• 2019

Cement is one of the most commonly used materials in the construction and civil engineering industry. However, emissions of carbon dioxide generated during the production of cement have been linked to climate change and environment pollutants. In order to replace cement, many studies have been actively performed research to utilizing Blast Furnace Slag(BFS), which is a byproduct of the steel industry. This study aims to investigate the physiochemical properties of the BFS powder based grout to determine whether it can be used as an environment-friendly grout material. As a fine powder, BSF can be used instead of cement grout due to its potential hydraulic property. BSF has also been known for its ability to strengthen materials long-term and to densify the internal structure of concrete. In order to investigate the physicochemical properties of the BFS powder based grout as a grout material, in this study assessment tests were performed through a gel-time measurement, uniaxial compressive strength, and chemical resistance tests, and heavy-metal leaching test. Characteristics and advantages of the slag were studied by comparing slag and cement in various methods.

• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.467-482
• /
• 2022

The Yeonghae basin is located at the northeastern part of the Yangsan fault (YSF; a potentially active fault). The study of the architecture of the Yeonghae basin is important to understand the activity of the Yangsan fault system (YSFS) as well as the basin formation mechanism and the activity of the YSFS. For this study, Digital Elevation Model (DEM) was used to highlight the marginal faults, and structural fieldwork was performed to understand the geometry of the intra-basinal structures and the nature of the bounding faults. DEM analysis reveals that the eastern margin is bounded by the northern extension of the YSF whereas the western margin is bounded by two curvilinear sub-parallel faults; Baekseokri fault (BSF) and Gakri fault (GF). The field data indicate that the YSF is striking in the N-S direction, steeply dipping to the east, and experienced both sinistral and dextral strike-slip movements. Both the BSF and GF are characterized dominantly by an oblique right-lateral strike-slip movement. The stress indicators show that the maximum horizontal compressional stress was in NNE to NE and NNW-SSE, which is consistent with right-lateral and left-lateral movements of the YSFS, respectively. The plotted structural data show that the NE-SW is the predominant direction of the structural elements. This indicates that the basin and marginal faults are mainly controlled by the right-lateral strike-slip movements of the YSFS. Based on the structural architecture of the Yeonghae basin, the study area represents a contractional zone rather than an extensional zone in the present time. We proposed two models to explain the opening and developing mechanism of the Yeonghae basin. The first model is that the basin developed as an extensional pull-apart basin during the left-lateral movement of the YSF, which has been reactivated by tectonic inversion. In the second model, the basin was developed as an extensional zone at a dilational quadrant of an old tip zone of the northern segment of the YSF during the right-lateral movement stage. Later on, the basin has undergone a shortening stage due to the closing of the East Sea. The second model is supported by the major trend of the collected structural data, indicating predominant right-lateral movement. This study enables us to classify the Yeonghae basin as an inverted strike-slip basin. Moreover, two opposite strike-slip movement senses along the eastern marginal fault indicate multiple deformation stages along the Yangsan fault system developed along the eastern margin of the Korean peninsula.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.4
• /
• pp.359-370
• /
• 2022

Despite continuous efforts to reduce on-site safety accidents, the construction industry remains a high-risk sector with a high rate of fatal accidents. Design for Safety(DFS), which manages safety risk factors at the design stage, is being used as a method to lower the construction safety accident rate. However, due to limited knowledge, designers are unaware of the design-results risks during the different of the project lifecycle, including construction, operation, and maintenance. Effective DFS can be conducted if the designer understands the effect of the building shape on the safety accident rate and corresponding safety management cost(SMC). The cost of safety facilities such as fall prevention nets and safety fences will vary depending on the shape of the building. This study analyzes the outer perimeter length's impact on SMC. Following the data collection from 21 projects for this study, an analysis was conducted using the independent variables of the building perimeter(BP), building shape factor(BSF), and building area(BA), the dependent variable of SMC. The correlation R2 was found to be 0.876, 0.801 and 0.792 between the BP and SMC, BSF and SMC, BA and SMC, respectively, indicating that these factors were closely related.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.43.1-43.1
• /
• 2010

In the crystalline silicon solar cells, the full area aluminum_back surface field(BSF) is routinely achieved through the screen-printing of aluminum paste and rapid firing. It is widely used in the industrial solar cell because of the simple and cost-effective process to suppress the overall recombination at the back surface. However, it still has limitations such as the relatively higher recombination rate and the low-to-moderate reflectance. In addition, it is difficult to apply it to thinner substrate due to wafer bowing. In the recent years, the dielectric back-passivated cell with local back contacts has been developed and implemented to overcome its disadvantages. Although it is successful to gain a lower value of surface recombination velocity(SRV), the series resistance($R_{series}$) becomes even more important than the conventional solar cell. That is, it is a trade off relationship between the SRV and the $R_{series}$ as a function of the contact size, the contact spacing and the geometry of the opening. Therefore it is essential to find the best compromise between them for the high efficiency solar cell. We have investigated the optimal design for the local back contact by using PC1D simulation.

• Journal of the Korea Institute of Building Construction
• /
• v.7 no.2 s.24
• /
• pp.59-65
• /
• 2007

Recently, due to the increase of high-rise buildings construction, many researches for making harden of concrete earlier and remove of forms faster are being performed to reduce construction period. In this study, we compared and analysed the early strength properties of mortar according to the kinds and replacement ratio of mineral admixture to select the kinds and replacement ratio of mineral admixture of high early strength concrete. For this purpose, mortar mixtures according to the kinds(FA, MK, ZR, BFS, DM) and replacement ratio(0, 2, 4% by volume of sand) of mineral admixture were selected. From our test data, early-age compressive strength decreased in accordance with the increase of replacement ratio of fly-ash(FA) & blast furnace slag powder(BSF) and, in case of addition admixture, early-age compressive strength of with containing 4% appeared higher compared with containing 2%.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.3
• /
• pp.439-444
• /
• 2020

In this paper, the analysis of the FSCS (frequency-selected coupling structure) as the coupling coefficient and multi-stage FSCS for enhanced bandstop bandwidth is suggested. The FSCS is composed by the connected coupled-line and open-stub. Basically, the resonance frequency of the FSCS is given by the electrical length of the stub, and the bandwidth is controlled by the coupling coefficient. Multi-stage FSCS is made by addition of another FSCS with the half electrical length. Manufactured bandstop filter using 3 stage FSCS is measured with the stopband of 177.3% and the maximum return loss of 1dB.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.21 no.2
• /
• pp.185-187
• /
• 2010

Most studies of the black soldier fly, Hermitia illucens, widely distributed throughout Southeast Asia and America focused on the use of larvae for recycling various organic materials and feed for fish and livestock. To recognize the instars of the soldier fly's larvae, we examined the number of exuviae originated from each larva from 1st instar to pupa. The weight and the head capsule width of the black soldier fly larvae also confirmed that the black soldier fly was passed through 6th instars. In addition, we found that the black soldier fly larvae had a well developed mandibular-maxillary complex, similar to those reported from the larvae of scavengers including Odontomyia cincta, Neopachygaster maculicornis, Ptecticus brunettii and Stratiomys ruficornis.