• Journal of Korean Society of Forest Science
• /
• v.90 no.1
• /
• pp.36-42
• /
• 2001

Changes in breeding bird community and forest structure by thinning were investigated from April 1997 to August 1998 in 10ha ($400{\times}250m$) of temperate mixed hardwood forest in Mt. Gariwang which is located in National Forest, Pyoungchang, Kangwon Province, Korea. Bird community was surveyed by the territory mapping method and forest structure was done by analyzing the vertical structure of foliage, distribution of diameter at breast height (DBH) of trees and tree species composition. After the thinning, tree density, number of tree species and basal area were decreased from 195ea/ha, 18 species and 6.69 $m^2/ha$ into 100ea/ha, 13 species and 3.04 $m^2/ha$, respectively. Foliage coverages in upper and mid layer were decreased, but coverage in low layer was increased. Large trees (Over 40cm of DBH) were decreased. Number of breeding bird species and pairs were decreased from 14 species and 23 pairs into 8 species and 12 pairs after the thinning. Number of breeding pairs of Yellow-breasted bunting Emberiza elegans incresed. There were decrease in number of species in hole & bush-nesting and canopy & bush-foraging guild. The results suggested that the thinning affect the species composition of breeding bird community and the forest structure. Changes of habitat structure might influence in breeding bird's density, species diversity and habitat using pattern of breeding bird community.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.414.2-414.2
• /
• 2016

The optimal configuration of a transmutation reactor based on a low aspect ratio tokamak is determined using coupled analysis of tokamak systems and neutron transport. The inboard radial build of the reactor components is obtained from plasma physics and engineering constraints, while outboard radial builds are mainly determined by constraints on a neutron multiplication, a tritium-breeding ratio, and a power density. It is shown that a breeding blanket model has an impact on the radial build of a transmutation blanket. A burn cycle has to be determined to limit a fast neutron fluence of a plasma facing material below a radiation damage limit.

• Plant Breeding and Biotechnology
• /
• v.6 no.4
• /
• pp.444-453
• /
• 2018

The rice bran oil contained in brown rice is composed of highly valued ingredient. Improving the content of unsaturated fatty acids in rice seed, such as oleic acid, linoleic acid, and ${\alpha}$-linolenic acid, would provide more benefit to human health. Fatty acid content is quantitative trait controlled by multiple genes. We have utilized high-density SNP data from highly advanced breeding populations to identify QTLs for fatty acid contents in brown rice. Here, we identified 51 major QTLs (M-QTLs) and 25 epistatic QTLs (EpQTLs) related to eleven fatty acid contents. Eight and four M-QTLs were pleiotropically associated with the content of different fatty acids in MT-RILs and DT-RILs, respectively. Total effect of M-QTLs for palmitic acid (16:0), oleic acid (18:1), and linoleic acid (18:2), could explain phenotypic variations of 36.7%, 63.7%, and 41% in MT-RILs, respectively. Alpha-linolenic acid which is important for a human's health could be explained phenotypic variation of 15.7% by six M-QTLs. These QTLs identified in this study can be used to improve nutritious content in rice breeding programs.

• Journal of the Korean Wood Science and Technology
• /
• v.52 no.5
• /
• pp.459-472
• /
• 2024

Teak tree breeding programs have been conducted over the last several decades in various locations throughout Indonesia. These programs have produced superior teak clones with growth increments > 3 cm diameter at breast height. The wood quality of this clonal teak must be evaluated to determine the final use of these trees and the success rate of the teak breeding programs. In this study we investigated the physical condition (reflected in wood color and heartwood percentage), physical properties (moisture content, basic density, shrinkage, and tangential/radial shrinkage ratio), and mechanical properties (modulus of elasticity, modulus of rupture, compressive strength parallel and perpendicular to grain, hardness, and cleavage strength) in 20-year-old clonal teak planted in Ngawi, East Java. The parameters were measured in the axial (bottom, middle, and top) and radial (near pith, middle, and near bark) directions and according to the British Standard 373:1957. The results showed that axial variation significantly affected the wood color (L^*, a^*, and b^*), basic density, radial shrinkage, modulus of elasticity, and compressive strength parallel to the grain. Besides, the radial variation had a significant effect on wood color (L^*), basic density, modulus of elasticity, modulus of rupture, compressive strength parallel and perpendicular to the grain, hardness, and cleavage strength. Based on these results, it can be concluded that the teak breeding program has been highly successful.

• Animal Bioscience
• /
• v.34 no.7
• /
• pp.1193-1201
• /
• 2021

Objective: According to market demand, meat duck breeding mainly includes 2 breeding directions: lean Pekin duck (LPD) and fat Pekin duck (FPD). The aim of the present study was to compare carcass and meat quality traits between 2 strains, and to provide basic data for guidelines of processing and meat quality improvement. Methods: A total of 62 female Pekin ducks (32 LPDs and 30 FPDs) were slaughtered at the age of 42 days. The live body weight and carcass traits were measured and calculated. Physical properties of breast muscle were determined by texture analyzer and muscle fibers were measured by paraffin sections. The content of inosine monophosphate (IMP), intramuscular fat (IMF) and fatty acids composition were measured by high-performance liquid chromatography, Soxhlet extraction method and automated gas chromatography respectively. Results: The results showed that the bodyweight of LPDs was higher than that of FPDs. FPDs were significantly higher than LPDs in subcutaneous fat thickness, subcutaneous fat weight, subcutaneous fat percentage, abdominal fat percentage and abdominal fat shear force (p<0.01). LPDs were significantly higher than FPDs in breast muscle thickness, breast muscle weight, breast muscle rate and breast muscle shear force (p<0.01). The muscle fiber average area and fiber diameter of LPDs were significantly higher than those of FPDs (p<0.01). The muscle fiber density of LPDs was significantly lower than that of FPDs (p<0.01). The IMF of LPDs in the breast muscle was significantly higher than that in the FPDs (p<0.01). There was no significant difference between the 2 strains in IMP content (p>0.05). The polyunsaturated fatty acid content of LPDs was significantly higher than that of FPDs (p<0.01), and FPDs had higher saturated fatty acid and monounsaturated fatty acid levels (p<0.05). Conclusion: Long-term breeding work resulted in vast differences between the two strains Pekin ducks. This study provides a reference for differences between LPD and FPD that manifest as a result of long-term selection.

• Korean Journal of Veterinary Service
• /
• v.44 no.4
• /
• pp.217-225
• /
• 2021

We investigated the effect of temperature and stock density on the collection efficiency of oral fluid in the pig farm in Korea. Three pig farms with similar breeding environmental conditions were selected and four pens of each farm (total 12 pens) were tested for the collection efficiency of oral fluid from pigs. Collection rate was considered as significant when oral fluid was collected from 70% of pigs within a pen. In the case of growing pigs, when internal temperature of pig barn increased by one designated degree (5℃), the oral fluid collection rate significantly decreased by 24.7% (P<0.05). The collection rate of oral fluid also decreased by 7.1% (P<0.05) as the density rate increase by one designated degree (12.5%). It was estimated that the collection efficiency of oral fluid decreased when the internal temperature of pig barn was 30℃ or higher, or barn density is higher 25% or high. On the other hand, in the case of stall-housing sows, unlike growing pigs, there was no significant differences according to the temperature, so oral fluid collection was considered to be efficient even in hot season.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.20 no.1
• /
• pp.97-105
• /
• 2018

We assessed the effects of population density on the growth and survival rate of sea cucumber(Stichopus japonicus) in indoor tank Growth of S. japonicus in high density breeding was slow overall, and body weight on 250, 350 and 500 individual/m² group were 31.9g, 26.8g and 21.5g, respectively. The growth rate of body weight was 3.5~5.1 times according to the density of water, and the survival rate was 44.2~50.1%. The growth and survival rate were increased as decreasing the storage density. During the breeding season, small individuals tend not to be large and constantly culled, so it is necessary to set up the sorting period (etc.), and divide S. japonicus into groups of similar size.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.6
• /
• pp.772-779
• /
• 2013

Linkage disequilibrium (LD) plays an important role in genomic selection and mapping quantitative trait loci (QTL). In this study, the pattern of LD and effective population size ($N_e$) were investigated in Chinese beef Simmental cattle. A total of 640 bulls were genotyped with IlluminaBovinSNP50BeadChip and IlluminaBovinHDBeadChip. We estimated LD for each autosomal chromosome at the distance between two random SNPs of <0 to 25 kb, 25 to 50 kb, 50 to 100 kb, 100 to 500 kb, 0.5 to 1 Mb, 1 to 5 Mb and 5 to 10 Mb. The mean values of $r^2$ were 0.30, 0.16 and 0.08, when the separation between SNPs ranged from 0 to 25 kb to 50 to 100 kb and then to 0.5 to 1 Mb, respectively. The LD estimates decreased as the distance increased in SNP pairs, and increased with the increase of minor allelic frequency (MAF) and with the decrease of sample sizes. Estimates of effective population size for Chinese beef Simmental cattle decreased in the past generations and $N_e$ was 73 at five generations ago.

• Animal Bioscience
• /
• v.35 no.12
• /
• pp.1940-1947
• /
• 2022

Objective: This study examined the effects of dietary calcium (Ca) and non-phytate phosphorus (NPP) on performance, tibial characteristics, meat quality and plasma biochemical variables in yellow-feathered broilers during 85 to 105 d of age. Methods: A total of 720 heads of 85-d broilers were allocated into 9 groups and provided with three levels of Ca (0.65%, 0.75%, 0.85%), and NPP (0.25%, 0.30%, 0.35%) in diets for 21 d. Results: The final body weight (FW), average daily gain (ADG), average daily feed intake (ADFI), and feed to gain ratio (F:G) were affected (p<0.05) by dietary Ca. From the quadratic regressions, the optimal level of Ca in diet were 0.71% for FW and ADG, and 0.67% for ADFI. Dietary Ca and NPP both significantly affected tibial breaking strength and density. From the quadratic regressions, the optimal level of Ca and NPP in diet were 0.81% and 0.37% for tibial density. The shear force of breast muscle of broilers given 0.75% or 0.85% Ca were lower than that in birds with 0.65% Ca and drip loss of birds given 0.65% or 0.75% Ca was lower than that in birds with 0.85% Ca (p<0.05). The drip loss of birds given 0.25% NPP was lowest among all NPP treatments (p<0.05). Calcium affected (p<0.05) the plasmal contents of phosphorus, osteocalcin (OC), parathyroid hormone (PTH) and calcitonin and the contents of OC and PTH were also influenced by dietary NPP. Conclusion: Dietary Ca and NPP level affected tibial characteristics, meat quality and biochemical variables in plasma of finisher-phase yellow-feathered broilers (85 to 105 d) and Ca also affected growth performance. Dietary 0.71% Ca and 0.30% NPP were enough for growth performance, while considering the growth performance, tibial characteristics, meat quality and biochemical variables together, 0.75% Ca and 0.37% NPP were recommended.

• Proceedings of the Botanical Society of Korea Conference
• /
• 1995.07a
• /
• pp.57-86
• /
• 1995

Molecular mapping of plant genomes has progressed rapidly since Bostein et al.(1980) introduced the idea of constructing linkage maps of human genome based on restriction fragment length polymorphism (RFLP) markers. In recent years, the development of protein and DNA markers has stimulated interest for the new approaches to plant improvement. While classical maps based on morphological mutant markers have provided important insights into the plant genetics and cytology, the molecular maps based on molecular markers have a number of inherent advatages over classical genetic maps for the applications in genetic studies and/or breeding schemes. Isozymes and DNA markers are numerous, discrete, non-deleterious, codominant, and almost entirely free of environmental and epistatic interactions. For these reasons, they are widely used in constructing detailed linkage maps in a number of plant species. Plant breeders improve crops by selecting plants with desirable phenotypes. However a plant's phenotyes is often under genetic control, positioning at different "quantitative trait loci" (QTLs) together with environmental effects. Molecular maps provide a possible way to determine the effect of the individual gene that combines to produce a quantitative trait because the segregation of a large number of markers can be followed in a single genetic cross. Using market-assisted selection, plants that contain several favorable genes for the trait and do not contain unfavourable segments can be obtained during early breeding processes. Providing molecular maps are available, valuable data relevant to the taxonomic relationships and chromosome evolution can be accumulated by comparative mapping and also the structural relationships between linkage map and physical map can be identified by cDNA sequencing. After constructing high density maps, it will be possible to clone genes, whose products are unknown, such as semidwarf and disease resistance genes. However, much attention has to be paid to level-up the basic knowledge of genetics, physiology, biochemistry, plant pathology, entomology, microbiology, and so on. It must also be kept in mind that scientists in various fields will have to make another take off by intensive cooperation together for early integration and utilization of these newly emerging high-techs in practical breeding. breeding.