• Proceedings of the KIEE Conference
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.363-365
• /
• 2002

train radio system used for shinkansen in japan has been 18 years since it was opened in 1982 and grown old. Analogue train radio is short of the number of lines and can't cope with the needs for the new high speed data transmission by 1,200 bps. The construction to renew the Tohoku - Joethu shinkansen train radio system(shinkansen train radio system) with digital method started from 2000 in JREast Digital method makes it possible to improve the quality of radio transmission, reliability of the network and every device, the speed and capacity of transmission and to be more efficient maintenance by introducing the latest IT technology. This paper will consider synchronization between base station. diversity method. software receiver, mobile high speed digital radio system, high reliability LAN introduced as technologies supporting these.

• Proceedings of the KOSOMBE Conference
• /
• 대한의용생체공학회 1992년도 추계학술대회
• /
• pp.105-108
• /
• 1992

In this paper, we have implemented the telemedicine system which has a color image system and a biosignal processor. The inputted image is acquisited to 512 by 480 color image data. The col looted data is compressed to 1/5 of the original image data by using 1/5 and compression algorithm. A biological signals are inputted by 12 bit A/D converter into the system. In case of using 2400bps modem, a frame full color image data and biological information data needed 10 minutes in transmission.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제25권1B호
• /
• pp.201-208
• /
• 2000

In the transmitter of optical communication systems, a time-division multiplexer combines several parallel data streams into a single data stream with a high bit rate. In this paper, we design a 4:1 (4-channels) time-division multiplexer using SiGe HBT with emitter size of 2x8um2. The operation speed is 100bps, the rise and fall times of 20-80% are 34ps and 34ps, respectively and the dissipation of power is 1.50W.

• 대한임상약리학회:학술대회논문집
• /
• 대한임상약리학회 2004년도 추계 학술대회
• /
• pp.4-4
• /
• 2004

• Journal of the Korean Institute of Navigation
• /
• 제22권1호
• /
• pp.1-13
• /
• 1998

Radiobeacons that carry corrections for global satellite navigation systems are currently being planned or installed in many countries. In early 1996, it was begun to send DGPS correction message from a marine radiobeacon station located in Changgi Got Lighthouse. It was the first test broadcast of DGPS correction data based on medium frequency of marine radiobeacon where transmission power and rate are 300W and 100bps respectively in Korea. However, there has not been any scientific study on the characteristic of the accuracy of a marine radiobeacon/DGPS. Accordingly, this paper investigates the accuracy of the system, which is currently operating in 310kHz. To do this , the real time differential correction in RTCM data was collected in an implemented system. And then the accuracy was analyzed related to the coverge of the radiobeacon/DGPS. As a result, it is verified that the differential positioning accuracy using the marine radiobeacon is sufficient to ensure the safety of marine activities around the coast of Korea.

• Journal of Korea Society of Digital Industry and Information Management
• /
• 제14권3호
• /
• pp.77-85
• /
• 2018

Multi-User Multiple-Input Multiple-Output (MU-MIMO) is the core technology for improving the channel capacity compared to Single-User MIMO (SU-MIMO) by using multiuser gain and spatial diversity. Key problem for the MU-MIMO is the user selection which is the grouping the users optimally. To solve this problem, we adopt Extreme Value Theory (EVT) at the beginning of the proposed algorithm, which defines a primary user set instead of a single user that has maximum channel power according to a predetermined threshold. Each user in the primary set is then paired with all of the users in the system to define user groups. By comparing these user groups, the group that produces a maximum sum rate can be determined. Through computer simulations, we have found that the proposed method outperforms the conventional technique yielding a sum rate that is 0.81 bps/Hz higher when the transmit signal to noise ratio (SNR) is 30 dB and the total number of users is 100.

• Journal of Korea Foundry Society
• /
• 제13권6호
• /
• pp.540-546
• /
• 1993

The effects of fluid flow on the purification of aluminum were studied. As the revolution rate(N) increased, the size of columnar grain decreased gradually. The concentration of solidified crystal was decreased with increasing distance from chill and revolution rate(N). Distribution boundary layer thickness(${\delta}$) was calculated from the solute distribution obtained in solid experimentally and by use of BPS equation. The value of ${\delta}$ changed from about $60{\mu}m$ at N value of 27rpm to about $15{\mu}m$ at N value of 1000rpm. From this result, high purification was obtained by decreasing the diffusion boundary layer under forced convection.

• Journal of Korea Foundry Society
• /
• 제15권5호
• /
• pp.507-513
• /
• 1995

The effect of forced convention on the solute redistribution of the Al ingot was studied quantitatively in an effort to fabricate high purity aluminum using a segregation method. Based on the experimental results, the solute concentration in the solid phase tended to decrease at the early state of solidification, and then increased gradually as solidification proceeded. Fe and Si concentrations decreased as growth rate decreased and as revolution speed increased. The solute redistribution obtained from the BPS model incorporated with the tangential flow component as well as the axial flow component within the melt, agreed well with the measurements.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제26권6B호
• /
• pp.848-855
• /
• 2001

본 논문에서는 GHz 대역의 고속 클럭 신호를 필요로 하는 데이터 통신 시스템 분야에 응용될 수 있는 새로운 구조의 클럭 및 데이터 복원회로를 제안하였다. 제안된 회로는 고속의 데이터 전송시 주로 사용되는 NRZ 형태의 데이터 복원에 적합한 구조로서 NRZ 데이터가 주입될 경우에 위상동기 회로에 발생하는 주요 잡음원인인 high frequency jitter를 방지하기 위한 새로운 위상 검출구조를 갖추고 있어서 보다 안정적인 클럭을 제공할 수 있다. 또 가변적인 지연시간을 갖는 delay cell을 이용한 위상검출기를 제안하여 위상 검출기가 갖는 dead zone 문제를 없애고, 항상 최적의 동작을 수행하여 빠른 동기 시간을 갖도록 하였다. Gbps급 대용량의 데이터를 복원하기 위한 클럭 생성을 목표로 하여 CMOS 0.25$\mu\textrm{m}$ 공정을 사용하여 설계한 후 그 동작을 HSPICE post-layout simulation을 통해 검증하였다.

• The Journal of the Acoustical Society of Korea
• /
• 제24권3E호
• /
• pp.99-108
• /
• 2005

To investigate the equalizer performance in underwater acoustic communication m the presence of intersymbol interference (ISI) due to multipath, computer simulations are carried out in discrete multipath shallow water channels for three different horizontal ranges. For the purpose of computation simplicity, least mean square (LMS) algorithm is adopted both in linear equalizer and nonlinear equalizer, decision feedback equalizer (DFE) to cancel out ISI effects. Binary phase shift keying (BPSK) signals have been transmitted with high data rate of 2000bps through the use of equalization technique. The results demonstrate that equalization is an efficient way to achieve high transmission data rate in the shallow water channel.