• 대한의용생체공학회:의공학회지
• /
• 제29권5호
• /
• pp.408-413
• /
• 2008

Human body has a complete left and right symmetry structure, and the left and right balance by Yin and Yang. When the balance is broken, the left and right Meridian becomes abnormal condition. Acupuncture is a kind of therapy to recover from energy unbalance of the left and right Meridian to a new balance condition. In the study, we observed the electric potential along the stomach meridian (ST) in order to verify the energy consensus phenomenon by transportation of bio-energy between operator and subject during acupuncture. The acupuncture effects on opposite meridian site were investigated by comparing the electric potentials between the right and left ST sites. Meridian electrical potentials (MEPs) between operator and subject were simultaneously generated during the acupuncture and the polarity of MEPs was opposite. The results might imply the bio-energy transportation between operator and subject. In addition, we observed three different patterns of MEPs on both ST sites which might represent the condition of the related meridians because meridians in the body are organically interconnected.

• KSTLE International Journal
• /
• 제1권1호
• /
• pp.8-11
• /
• 2000

A surface crack in a semi-infinite body under Hertzian contact was considered. The simplified method used to estimate stress intensity factor K for specimen was extended to the model which is chosen in this paper. Very satisfactory results are obtained comparing with those known and it is proved that the method is more convenient than other methods. The results of the analysis show that due to the presence of $K_I$ for unlubricated condition, mode I fracture is active in the field below the surface and the maximum $K_{I}$ is obtained when the trailing edge of Hertzian contact reaches a position over the crack. The magnitudes of stress intensity factors $K_I$ and $K_Il$ increase with increasing friction forces. For a surface crack perpendicular to the contact surface, the stress intensity factor $K_I$ reaches its maximum value at a depth very close to the surface. Driving forve fer crack initiation and propagation is $K_I$ for unlubricated condition and $K_Il$ for both fluid and boundary lubricated condition.n.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권3호
• /
• pp.403-413
• /
• 2017

Dual-point aerodynamic design optimization is conducted for DLR-F6 wing-body-nacelle-pylon configuration adopting an efficient surface mesh movement method for complex junction geometries. A three-dimensional unstructured Euler solver and its discrete adjoint code are utilized for flow and sensitivity analysis, respectively. Considered design conditions are a low-lift condition and a cruise condition in a transonic regime. Design objective is to minimize drag and reduce shock strength at both flow conditions. Shape deformation is made by variation of the section shapes of inboard wing and pylon, nacelle vertical location and nacelle pitch angle. Hicks-Henne shape functions are employed for deformation of the section shapes of wing and pylon. By the design optimization, drag coefficients were remarkably reduced at both design conditions retaining specified lift coefficient and satisfying other constraints. Two-point design results show mixed features of the one-point design results at low-lift condition and cruise conditions.

• Geomechanics and Engineering
• /
• 제17권2호
• /
• pp.207-214
• /
• 2019

Dams have a great importance on energy and irrigation. Dams must be evaluated statically and dynamically even after construction. For this purpose, Torul dam built between years 2000 and 2007 Harsit River in Gümüşhane province, Turkey, is selected as an application. The Torul dam has 137 m height and 322 GWh annual energy production capacity. Torul dam is a kind of concrete face rock fill dam (CFRD). In this study, static and pseudo seismic stability of Torul dam was investigated using finite element method. Torul dam model is constituted by numerical stress analysis named Phase2 which is based on finite element method. The dam was examined under 11 different water filling levels. Thirteenth stage of the numerical model is corresponding full reservoir condition which water filled up under crest line. Besides, pseudo static coefficients for dynamic condition applied to the dam in fourteenth stage of the model. Stability assessment of the Torul dam has been discussed according to the displacement throughout the dam body. For static and pseudo seismic cases, the displacements in the dam body have been compared. The total displacements of the dam according to its the empty state increase dramatically at the height of the water level of about 70 m and above. Compared to the pseudo-seismic analysis, the displacement of dam at the full reservoir condition is approximately two times as high as static analysis.

• 소성∙가공
• /
• 제14권8호통권80호
• /
• pp.655-660
• /
• 2005

• 한국동물학회:학술대회논문집
• /
• 한국동물학회 1996년도 공동 춘계학술대회
• /
• pp.57.1-57
• /
• 1996

No Abstract, See Full Text

• 한국발생생물학회지:발생과생식
• /
• 제16권4호
• /
• pp.309-314
• /
• 2012

This study was conducted to analyze the difference of body types within and between wild and farmed populations of olive flounder Paralichthys olivaceus using measured records of morphological traits. The results showed that surveyed traits and standard deviation were $1,355{\pm}742g$ of body weight, $48.01{\pm}7.79cm$ of total length, and $40.96{\pm}6.80cm$ of body length. Also body height, body shape index and condition factor were $17.19{\pm}3.43cm$, $9.99{\pm}0.74$ and $11.16{\pm}1.54$, respectively. As result of least squares mean and standard error for each trait assumed in this study, those of farmed population showed significantly higher than those of wild population in all traits, exclusively in total length and body length (p<0.01). Particularly, the values of the body height and the body weight of the farmed population were higher than those of the wild population in the same total length. And the phenotypic correlation coefficients of the body weight, the total length, the body length and the body height showed strong positive correlation in all populations. These result suggested that morphological differences exist in farmed and wild flounder. Therefore, introduction of wild flounder is essential for the future production to improve the body type of farmed flounder, and parental fish should be chosen by considering selection of commercially important traits in the production process.

• International journal of advanced smart convergence
• /
• 제5권3호
• /
• pp.56-60
• /
• 2016

Body physical technique is to pursuit the dynamic motion by the physical index(PI) and sensory index(SI) on the physical body function. Function of the physical body by the motor condition is organized the dynamic physical system. For the physical motion of signal, we is defined a runout value of the body function by the physical index on the dynamic state. The concept of body physical index was identified the reference of physical index and sensory index by the body technique. As to detect a variation of the body physical technique-runout physical index(BPT-RPI) of the maximum and average and minimum in terms of physical motion, and the dynamic sensory value that was a runout function of the vision variation of the $Vi-{\xi}_{MAX-AVG-MIN}$ with $2.53{\pm}4.85$ units, that was a runout function of the vestibular variation of the $Ve-{\xi}_{MAX-AVG-MIN}$ with ($-0.69{\pm}2.32$)units, that was a runout function of the somatosensory variation of the $So-{\xi}_{MAX-AVG-MIN}$ with ($-1.43{\pm}-1.36$) units. The dynamic physical motion will be to confirm at the variable function of the runout motion for the body function values of dynamic physical index on the BPT-RPI that was identified an evaluation of the physical sensory function by the dynamic physical system. Runout body system was mentioned of a physical body situation by the mild moving and was refer a runout data of dynamic physical nervous index.

• Corrosion Science and Technology
• /
• 제2권5호
• /
• pp.247-251
• /
• 2003

The corrosion forms of automotive body panels are various. One of the representations is a corrosion pitting and its propagation on the lapped portion by galvanic corrosion. But it has been difficult in correlation analysis about the corrosion propagation rate and mechanism of pitting and the actual automotive body in field. This present study interprets experimentally the rust pitting occurrence mechanism on the lapped panels through experimental methods. And field car investigation was executed for correlation analysis with experimental results. This paper compares corrosion propagation rate by pitting on hot-dip galvannealed steel sheets with corrosion forms in the automotive field condition. The research fundamentals which make it possible to predict the pitting occurrence and propagation on the lapped panels in the actual vehicles are given.

• 대한기계학회논문집A
• /
• 제22권2호
• /
• pp.380-390
• /
• 1998

In the present work a finite element formulation using dynamic explicit time integration scheme is used for numerical analysis of auto-body panel stamping processes. The lumping scheme is employed for the diagonal mass matrix and linearizing dynamic formulation. A contact scheme is developed by combining the skew boundary condition and direct trial-and-error method. In this work, for economic analysis the faster punch velocity and the mass scaling method are introduced. To investigate the effects of punch velocity and mass scaling, the various values of punch velocity and the various mass scalings are used for numerical analysis. Computations are carried out for analysis of complicated auto-body panel stamping processes such as forming of an oil pan and a fuel tank.