• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.77-88
• /
• 2000

In this paper, the 3-mode variable gain high power amplifier for a transmitter of INMARSAT-B operating at L-band(1626.5-1646.5 MHz) was developed. This SSPA can amplify 42 dBm in high power mode, 38 dBm in medium power mode and 36 dBm in low power mode for INMARSAT-B. The allowable errol sets +1 dBm as the upper limit and -2 dBm as the lower limit, respectively. To simplify the fabrication process, the whole system is designed by two parts composed of a driving amplifier and a high power amplifier. The HP's MGA-64135 and Motorola's MRF-6401 were used for driving amplifier, and the ERICSSON's PTE-10114 and PTF-10021 for the high power amplifier. The SSPA was fabricated by the RP circuits, the temperature compensation circuits and 3-mode variable gain control circuits and 20 dB parallel coupled-line directional coupler in aluminum housing. In addition, the gain control method was proposed by digital attenuator for 3-mode amplifier. Then il has been experimentally verified that the gain is controlled for single tone signal as well as two tone signals. In this case, the SSPA detects the output power by 20 dB parallel coupled-line directional coupler and phase non-splitter amplifier. The realized SSPA has 41.6 dB, 37.6 dB and 33.2 dB for small signal gain within 20 MHz bandwidth, and the VSWR of input and output port is less than 1.3:1. The minimum value of the 1 dB compression point gets more than 12 dBm for 3-mode variable gain high power amplifier. A typical two tone intermodulation point has 36.5 dBc maximum which is single carrier backed off 3 dB from 1 dB compression point. The maximum output power of 43 dBm was achieved at the 1636.5 MHz. These results reveal a high power of 20 Watt, which was the design target.

• IMMUNE NETWORK
• /
• v.9 no.1
• /
• pp.27-33
• /
• 2009

Macrophages generated in vitro using macrophage-colony stimulating factor (M-CSF) and interleukin (IL)-6 from bone marrow cells (BM-Mp) are defective in antigen presenting cell (APC) function as shown by their ability to induce the proliferation of anti-CD3 mAb-primed syngeneic T cells. However, they do express major histocompatibility (MHC) class I and II molecules. accessory molecules and intracellular adhesion molecules. Here we demonstrate that the defective APC function of macrophages is mainly due to production of $TGF-{\beta}1$ by BM-Mp. Methods: Microarray analysis showed that $TGF-{\beta}1$ was highly expressed in BM-Mp, compared to a macrophage cell line, B6D. which exerted efficient APC function. Production of $TGF-{\beta}1$ by BM-Mp was confirmed by neutralization experiments of $TGF-{\beta}1$ as well as by real time-polymerase chain reaction (PCR). Results: Addition of $anti-TGF-{\beta}1$ monoclonal antibody to cultures of BM-Mp and anti-CD3 mAb-primed syngeneic T cells efficiently induced the proliferation of syngeneic T cells. Conversely, the APC function of B6D cells was almost completely suppressed by addition of $TGF-{\beta}1$. Quantitative real time-PCR analysis also confirmed the enhanced expression of $TGF-{\beta}1$ in BM-Mp. Conclusion: The defective APC function of macrophages generated in vitro with M-CSF and IL-6 was mainly due to the production of $TGF-{\beta}1$ by macrophages.

• ALGAE
• /
• v.21 no.3
• /
• pp.333-341
• /
• 2006

The productivities of Chlorella ovalis and Dunaliella parva were influenced by the rates of medium compositions obtained from the fermented animal wastewater (BM: bacteria mineral water) including a natural substitute chelator for EDTA (etylenediaminetetraacetic acid). The most favorable medium was -E+50 adding 50% BM in f/2 medium instead of EDTA, a chemical chelator, which increased more 19-fold of cell density in C. ovalis and 7-fold in D. parva than cells cultured on f/2 medium as well as the enhancements of chlorophyll a (f/2-E: 0.26 g L–1, -E+50: 1.5 g L–1 in C. ovalis; f/2-E: 2.7 g L–1, -E+50: 15 g L–1 in D. parva) and the increase of maximal PSII quantum yields. These results were verified that the BM could play an important part as a natural chelator substituted for EDTA. In the fields of biotechnology, food organisms in fishery and eco-industries of CO2 sequestration in air and nutrient removal in water, the natural chelator of BM could be applied to enhance the biomass of the other microalgae.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.7 no.2
• /
• pp.197-201
• /
• 2003

The recombinant plasmids harboring a heterologous gene coding mouse endostatin were transfected and expressed stably in Trichoplusia ni Tn 5B1-4 cells and Bombyx mori BmN cells, respectively. Recombinant endostatin expressed in the stably transformed Tn 5B1-4 and BmN cells was secreted into the medium. BmN cells are relatively lower in maximum cell growth and recombinant endostatin production than Tn 5B 1-4 cells. Recombinant endostatin was also purified to homogeneity using a simple one-step ${Ni^2+}$ affinity fractionation method. Purified recombinant endostatin inhibited endothelial cell proliferation in a dose-dependent manner. The concentration at half-maximum inhibition $({ED_50})$ for recombinant endostatin was approximately 0.35 ${\mu}g$/ml.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.9
• /
• pp.1317-1324
• /
• 2014

The immune system protects the body against harmful substances and infectious agents. Normally, the body can maintain a state of immune homeostasis. However, failure of immune homeostasis results in severe diseases when the immune system is defective. We investigated the immunomodulatory effect of Curcuma longa L. extract in LP-BM5 MuLV (murine leukemia viruses)-induced murine AIDS (acquired immune deficiency syndrome). Mice were divided into six groups: normal control, infected control (LP-BM5 MuLV infection), positive control (LP-BM5 MuLV infection+dietary supplement of red ginseng 200 mg/kg), CL50 (LP-BM5 MuLV infection+dietary supplement of Curcuma longa L. 20% alcohol extract 50 mg/kg), CL200 (LP-BM5 MuLV infection+dietary supplement of Curcuma longa L. 20% alcohol extract 200 mg/kg), and CL500 (LP-BM5 MuLV infection+dietary supplement of Curcuma longa L. 20% alcohol extract 500 mg/kg). We found that dietary supplementation with Curcuma longa L. 20% alcohol extract inhibited elevation of spleen, lymph node, and liver weights as well as reduction of T- and B-cell proliferation and natural killer cell activity induced by LP-BM5 MuLV infection. Moreover, Curcuma longa L. 20% alcohol extract inhibited Th1 (IL-2, IFN-${\gamma}$)/Th2 (IL-4, IL-10) cytokine imbalance and pro-inflammatory cytokine production. In conclusion, these data suggest that Curcuma longa L. has immunomodulatory effects in LP-BM5 MuLV-induced murine AIDS.

• Journal of Food and Nutrition Research
• /
• v.10 no.1
• /
• pp.32-40
• /
• 2022

Diabetes is a chronic metabolic disease with a high prevalence worldwide. Beet (Beta vulgaris) is a plant that is widely used in many countries and has various biological activities. In this study, we aimed to evaluate the antidiabetic effect of a B. vulgaris mixture (BM). In the in vitro evaluation, we measured the inhibitory activities of α-amylase and α-glucosidase, performed the oral starch tolerance test (OATT) and oral sucrose tolerance test (OSTT) in Sprague Dawley (SD) rats, and evaluated the clinical symptoms, oral glucose tolerance test (OGTT), number of blood cells, and insulin resistance in db/db mice. BM showed an inhibitory effect against α-amylase and α-glucosidase activity and decreased the blood glucose increased in the OATT and OSTT. In the diabetes mouse model, BM alleviated the general symptoms of diabetes and OGTT results showed a decrease in the increased blood sugar level. Regarding diabetes-related tissue weight, BM decreased the reduced pancreatic weight and showed an effect on diabetes-related factors of blood. Histological analysis indicated that BM decreased insulin concentration, insulin resistance, and insulin secretion ability in serum, and increased insulin concentration in the islets of Langerhans. These results demonstrate that BM has an antidiabetic effect through the regulation of glycolytic enzymes and β cell activity in the pancreas.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.13 no.1
• /
• pp.23-30
• /
• 2006

BmCu/Zn SOD was isolated from early embryo of Bombyx mori using microarray analysis. The BmCu/Zn SOD gene was observed during the early embryonic stage with the strongest signal found at the unfertilizaion, fertilization and blastoderm stages. The BmCu/Zn SOD gene encodes a protein of 154 amino acids with a calculated Mr of 15 kDa. The deduced amino acid sequence of BmCu/Zn SOD indicated that the residues that form on the Cu/Zn binding site are conserved and that the sequence is a 60% identity to that of M. domestica. In a phylogenetic tree, Bm SOD was also close to Drosophila SODs rather than other insect SODs. The BmCu/Zn SOD gene exists as a single copy in the genome. Transcripts of BmCu/Zn SOD cDNA were identified by northern blot analysis. The expression of the BmCu/Zn SOD gene was observed weakly in most of larvae, pre-pupae, pupae and adult tissues. Also, the BmCu/Zn SOD gene was observed in early embryonic stage. Although the roles of SODs remains to be further elucidated, the high expression of BmCu/Zn SOD gene at before 24 h post fertilization suggests that this gene is of general importance during early embryogenesis in the Bombyx mod.

• Journal of dental hygiene science
• /
• v.18 no.1
• /
• pp.42-49
• /
• 2018

The computer-aided design/computer-aided manufacturing (CAD/CAM) system was introduced to shorten the production time of all-ceramic restorations and the number of patient visits. Among these types of ceramic for dental CAD/CAM, they have been processed into inlay, onlay, and crown shapes using leucite-reinforced glass-ceramics to improve strength. The purpose of this study was to observe the mechanical properties and microstructure of leucite-reinforced glass-ceramics for dental CAD/CAM. Two types of leucite-reinforced glass-ceramic blocks (IPS Empress CAD, Rosetta BM) were prepared with diameter of 13 mm and thickness of 1 mm. Biaxial flexural testing was conducted using a piston-on-three-ball method at a crosshead speed of 0.5 mm/min. Weibull statistics were used for the analysis of biaxial flexural strength. Fracture toughness was obtained using an indentation fracture method. Specimens were observed by field emission scanning electron microscopy to examine the microstructure of the leucite crystalline phase after acid etching with 0.5% hydrofluoric acid aqueous solution for 1 minute. The results of strength testing showed that IPS Empress CAD had a mean value of $158.1{\pm}8.6MPa$ and Rosetta BM of $172.3{\pm}8.3MPa$. The fracture toughness results showed that IPS Empress CAD had a mean value of $1.28{\pm}0.19MPa{\cdot}m^{1/2}$ and Rosetta BM of $1.38{\pm}0.12MPa{\cdot}m^{1/2}$. The Rosetta BM sample exhibited higher strength and fracture toughness. Moreover, the crystalline phase size and ratio were increased in the Rosetta BM sample. The above results are expected to elucidate the basic mechanical properties and crystal structure characteristics of IPS Empress CAD and Rosetta BM. Additionally, they will help develop leucite-reinforced glass-ceramic materials for CAD/CAM.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.5
• /
• pp.197-203
• /
• 2003

In this paper, we have presented millimeter-wave high conversion gain quadruple subharmonic mixers adopting the cascode harmonic generator The subharmonic mixers were successfully integrated by using 0.1 ${\mu}{\textrm}{m}$ GaAs pseudomorphic HEMTs(PHEMTs) and coplanar waveguide(CPW) structures. Measured output of 1st, 2nd and 4th harmonics of the fabricated cascode 4th harmonic generator are -21.42 dBm, -32.65 dBm and -13.45 dBm, respectively, for an input power of 10 dBm at 14.5 GHz. We showed that the highest conversion gain of 3.4 dB has obtained thus far at a LO power of 13 dBm from the fabricated subharmonic mixers. The millimeter-wave subharmonic mixer also ensure a high degree of isolation showing -53.6 dB in the LO-to-IF and -46.2 dB in the LO-to-RF, respectively, at a frequency of 14.5 GHz. The high conversion gain achieved in this work is the first report among the millimeter-wave subharmonic mixers.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.5
• /
• pp.472-478
• /
• 2003

In this paper, a near zero If mixer was designed in cascode structure by using two single-gate FETs. Since it is driven by the second order harmonic of LO signal, a sub-harmonic cascode FET mixer has good LO-RF port isolation characteristic. In order to solve DC offset of a homodyne system, near zero If is used instead of zero If and the mixer is driven by sub-harmonic of LO signal. As RF input power was -30 dBm and LO power was 6 dBm, the designed mixer had 6.7 dB conversion gain, 8.4 dB noise figure, 31.5 dB LO-RF port isolation, -1.9 dBm lIP3 and -2.8 dBm IIP2.