• Title/Summary/Keyword: BM S

Search Result 577, Processing Time 0.024 seconds

A Study on Implementation and Performance of the Power Control High Power Amplifier for Satellite Mobile Communication System (위성통신용 전력제어 고출력증폭기의 구현 및 성능평가에 관한 연구)

  • 전중성;김동일;배정철
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.4 no.1
    • /
    • pp.77-88
    • /
    • 2000
  • In this paper, the 3-mode variable gain high power amplifier for a transmitter of INMARSAT-B operating at L-band(1626.5-1646.5 MHz) was developed. This SSPA can amplify 42 dBm in high power mode, 38 dBm in medium power mode and 36 dBm in low power mode for INMARSAT-B. The allowable errol sets +1 dBm as the upper limit and -2 dBm as the lower limit, respectively. To simplify the fabrication process, the whole system is designed by two parts composed of a driving amplifier and a high power amplifier. The HP's MGA-64135 and Motorola's MRF-6401 were used for driving amplifier, and the ERICSSON's PTE-10114 and PTF-10021 for the high power amplifier. The SSPA was fabricated by the RP circuits, the temperature compensation circuits and 3-mode variable gain control circuits and 20 dB parallel coupled-line directional coupler in aluminum housing. In addition, the gain control method was proposed by digital attenuator for 3-mode amplifier. Then il has been experimentally verified that the gain is controlled for single tone signal as well as two tone signals. In this case, the SSPA detects the output power by 20 dB parallel coupled-line directional coupler and phase non-splitter amplifier. The realized SSPA has 41.6 dB, 37.6 dB and 33.2 dB for small signal gain within 20 MHz bandwidth, and the VSWR of input and output port is less than 1.3:1. The minimum value of the 1 dB compression point gets more than 12 dBm for 3-mode variable gain high power amplifier. A typical two tone intermodulation point has 36.5 dBc maximum which is single carrier backed off 3 dB from 1 dB compression point. The maximum output power of 43 dBm was achieved at the 1636.5 MHz. These results reveal a high power of 20 Watt, which was the design target.

  • PDF

Experimental Verification of Multipactor Sensitivity for S-band Diplexer (S 대역 Diplexer에 대한 Multipactor 민감도 시험)

  • Choi, Seung-Woon;Kim, Day-Young;Kwon, Ki-Ho;Lee, Yun-Ki
    • Aerospace Engineering and Technology
    • /
    • v.6 no.1
    • /
    • pp.83-91
    • /
    • 2007
  • An experimental verification of multipactor(MP) discharge for S-band diplexer as a sample DUT for space application by an in-house MP test facility is proposed. The designed diplexer having two BPFs for Rx and Tx is applied to a design of five pole inter-digital cavity type band pass filter with chebyshev response, it has 2.7 % bandwidth centered at 2.232 and 2.055 GHz for Rx, Tx, respectively. To avoid the MP discharge, the accurate design and analysis methods based on 3D EM field analysis are considered. The proposed in-house MP test facility consists of a phase detecting system using a doubly balanced mixer as a simple, low cost and real time MP test method compared with results of previously well-known MP detection systems as cross reference methods. The calculated MP threshold RF input power is 43.13 dBm. The measured one is 43 dBm and 44 dBm for CW, pulsed mode test, respectively.

  • PDF

Design of the Clock Recovery Circuit for a 40 Gb/s Optical Receiver (40 Gb/s 광통신 수신기용 클락 복원 회로 설계)

  • 박찬호;우동식;김강욱
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.15 no.2
    • /
    • pp.134-139
    • /
    • 2004
  • A clock recovery circuit for a 40 Gb/s optical receiver has been designed and implemented. The clock recovery circuit consists of pre-amplifiers, a nonlinear circuit with diodes, a bandpass filter and a clock amplifier. Before implementing the 40 Gb/s clock recovery circuit, a 10 Gb/s clock recovery circuit has been successfully implemented and tested. With the 40 Gb/s clock recovery circuit, when a 40 Gb/s signal of -10 dBm was applied to the input of the circuit, the 40 GHz clock was recovered with the -20 dBm output power after passing through the nonlinear circuit. The output signal from the nonlinear circuit passes through a narrow-band filter, and then amplified. The implemented clock recovery circuit is planned to be used for the input of a phase locked loop to further stabilize the recovered clock signal and to reduce the clock jitter.

S-Band Low Noise Amplifier Based on GaN HEMT for High Input Power Robustness (고입력 내성을 위한 GaN HEMT 기반 S-대역 저잡음 증폭기)

  • Kim, Hong-Hee;Kim, Sang-Hoon;Choi, Jin-Joo;Choi, Gil-Wong;Kim, Hyoung-Joo
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.26 no.2
    • /
    • pp.165-170
    • /
    • 2015
  • In this paper, we present design and measurement of LNA(Low Noise Amplifier) based on GaN HEMT(Gallium Nitride High Electron Mobility Transistor) to reduce the total noise figure of radar receiver and for robustness of LNA. In radar receiver using LNA based on GaAs(Gallium Arsenide) technology, limiter is necessary at the very front of the radar receiver to protect LNA. As a result, total noise figure of radar receiver is deteriorated. In this research, measured noise figure of LNA based on GaN HEMT is below 2 dB. In the case of commercialized GaAs LNA, recommended maximum input power is about 30 dBm. On the other hand, GaN HEMT LNA which is designed and measured is burned-out when input power is 43 dBm and robustness is guaranteed at input power 45.4 dBm.

A Power Amplifier for Portable Base Stations Operating in TVWS (TVWS를 이용하는 이동기지국용 전력증폭기)

  • Kang, Sanggee
    • Journal of Satellite, Information and Communications
    • /
    • v.12 no.4
    • /
    • pp.110-114
    • /
    • 2017
  • Using a small mobile wireless network as a supplement to the disaster safety network can be useful for eliminating small radio shadowing areas, reducing traffic overloads in disaster areas, and quickly building a disaster communication network in difficult access areas. Potable base station is needed to build a small mobile wireless network, and the portable base station using TVWS(TV White Space) is effective in terms of utilization of radio frequency resources and construction cost of wireless networks. In this paper, we design and implement a power amplifier for portable base station operating in TVWS. The implemented power amplifier operates at 470 ~ 698MHz. The gain of the implemented amplifier is more than 20.1dB, the input/output return loss is more than 11.4dB, and the isolation is more than 39.9dB when the output is off. The IMD characteristic of the power amplifier has characteristics of 61.0dBc with 18.8dBm output at 470MHz, 59.3dBc wih 18.6dBm output at 550MHz and 56.5dBc with 19.0dBm output at 690MHz. The power amplifier implemented in this paper can be used as a power amplifier for portable base station.

A 1.485 Gbps Wireless Video Signal Transmission System at 240 GHz (240 GHz, 1.485 Gbps 비디오신호 무선 전송 시스템)

  • Lee, Won-Hui;Chung, Tae-Jin
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.10 no.4
    • /
    • pp.105-113
    • /
    • 2010
  • In this paper, a 1.485 Gbps video signal transmission system using the carrier frequency of 240 GHz band was designed and simulated. The sub-harmonic mixer based on Schottky barrier diode was simulated in the transmitter and receiver. Both of heterodyne and direct detection receivers were simulated for each performance analysis. The ASK modulation was used in the transmitter and the envelop detection method was used in the receiver. The transmitter simulation results showed that the RF output power was -11.4 dBm($73{\mu}W$), when the IF input power was -3 dBm(0.5 mW) at the LO power of 7 dBm(5 mW) in sub-harmonic mixer, which corresponds to SSB(Single Side Band) conversion loss of 8.4 dB. This value is similar to the conversion loss of 8.0 dB(SSB) of VDI's commercial model WR3.4SHM(220~325 GHz) at 240 GHz. The combined transmitter and receiver simulation results showed that the recovered signal waveforms were in good agreement to the transmitted 1.485 Gbps NRZ signal.

A Study on the Design of Microwave Oscillator Output Matching Circuit Using 3-dB Coupler Tuner (3-dB Coupler Tuner를 이용한 초고주파 발진기의 출력 정합회로 설계에 관한 연구)

  • 이석기;오재석;이영순;김병철
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.9 no.2
    • /
    • pp.171-178
    • /
    • 1998
  • Generally, the output matching circuit has the most influence to the output power of oscillator and existing method for output matching has difficulty for making the optimum output matching circuit because the matching has to be done nearby the infinite impedance area of the Smith Chart. In this paper, it is studied for the output matching circuit of the microwave oscillator to get the maximum output power. The maximum output point can be found by adjusting the position of moving short in the Tuner while the oscillator is operating after connect the 3-dB coupler Tuner to the oscillator without output matching circuit. To design the oscillator for the maximum output power can be done easily with the microstrip line which is realized from the measured S-parameters of Tuner. In compare the oscillator by the existing method with another one by the suggested method in this paper, the first one has 6.45 dBm output power and second one has 9.71 dBm which is 3.26 dBm higher than the first one at the oscillation frequency 1.0338 GHz.

  • PDF

A Systematic Review of Risk Factors for Brain Metastases and Value of Prophylactic Cranial Irradiation in Non-Small Cell Lung Cancer

  • Sun, Dian-Shui;Hu, Li-Kuan;Cai, Ying;Li, Xiao-Mei;Ye, Lan;Hou, Hua-Ying;Wang, Cui-Hong;Jiang, Yu-Hua
    • Asian Pacific Journal of Cancer Prevention
    • /
    • v.15 no.3
    • /
    • pp.1233-1239
    • /
    • 2014
  • Background: The incidence of brain metastases (BM) varies in patients with non-small cell lung cancer (NSCLC), calls into question the value of prophylactic cranial irradiation (PCI). It is possible that clinicopathologic characteristics are associated with the development of BM, but these have yet to be identified in detail. Thus, we conducted the present meta-analysis on risk factors for BM and the value of PCI in patients with NSCLC. Methods: Eligible data were extracted and the risk factors for BM and the value of PCI in patients with NSCLC were analyzed by calculating the pooled odds ratio (OR). Heterogeneity was detected using Q and I-squared statistics, and publication bias was tested by funnel plots and Egger's test. Results: Six randomized controlled trials with a focus on the value of PCI and 13 eligible studies with a focus on risk factors for BM were included. PCI significantly reduced the incidence of BM in patients with NSCLC (p=0.000, pooled OR=0.34, 95% confidence interval = 0.37-0.59). Compared with non-squamous cell carcinoma, squamous cell carcinoma was associated with a low incidence of BM in patients with NSCLC (p=0.000, pooled OR=0.47, 95% confidence interval =0.34-0.65). The funnel plot and Egger's test suggested that there was no publication bias in the current meta-analysis. Conclusions: This meta-analysis provides statistical evidence that compared with non-squamous cell carcinoma, squamous cell carcinoma can be used as a predictor for BM in patients with NSCLC, and PCI might reduce the incidence of BM in patients with NSCLC, but does not provide a survival benefit.

An in vitro study of immune activity by β-1,3/1,6-glucan isolated from Aureobasidium pullulans (Aureobasidium pullulans으로 부터 분리한 β-1,3/1,6-glucan의 면역활성의 연구)

  • Yoon, Jong Young;Hwang, Kwontack
    • Food Science and Preservation
    • /
    • v.23 no.6
    • /
    • pp.906-912
    • /
    • 2016
  • ${\beta}$-Glucan is a natural compound contained in cell walls of yeast or fungi, and cereal's fiber. It is also known to boost the immune system in human. Aureobasidium is a producer of water-soluble ${\beta}$-1,3/1,6-glucan. In this study, natural killer (NK) cell and macrophage activity were tested to investigate the effects of ${\beta}$-1,3/1,6-glucan isolated from A. pullulans on immune activity. Activation of NK cell was increased about 63-39% by the treatment of $10-200{\mu}g/mL$ ${\beta}$-1,3/1,6-glucan than control. Besides, only $10{\mu}g/mL$ of ${\beta}$-1,3/1,6-glucan was enough to boost activation of NK cell. Phagocytosis of macrophage was increased to 15~21% by the treatment of $10{\sim}200{\mu}g/mL$ of ${\beta}$-1,3/1,6-glucan than zymosan-treatment. In LP-BM5 proliferating inhibition test, relative mRNA level of LP-BM5 virus was decreased in ${\beta}$-1,3/1,6-glucan-treated cell about 36~74% than control. The decline of LP-BM5 mRNA level appeared to depend on the concentration of ${\beta}$-1,3/1,6-glucan. These results suggest that pure ${\beta}$-1,3/1,6-glucan from A. pullulans might be contributing to enhancement of immune activity through the activation of NK cell and phagocytosis of macrophage. Moreover, treatment of the ${\beta}$-1,3/1,6-glucan could increase the resistance to virus infection such as LP-BM5 through the restraining of the multiplication.

Genetic Diversity of Magra Sheep from India Using Microsatellite Analysis

  • Arora, R.;Bhatia, S.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.19 no.7
    • /
    • pp.938-942
    • /
    • 2006
  • Genetic diversity of Magra - a lustrous carpet wool breed of India, was investigated by means of 25 ovine microsatellite markers proposed by the Food and Agriculture Organization and the International Society for Animal Genetics (FAO-ISAG). All used microsatellites amplified well and exhibited polymorphisms. A wide range of genetic variability was observed as allele number from 3 (BM6506, OarCP20) to 10 (CSSM31), observed heterozygosity from 0.200 (BM6506) to 0.947 (OarHH35), expected heterozygosity from 0.368 (CSSM47) to 0.864 (BM1314) and Polymorphism Information Content (PIC) from 0.347 (CSSM47) to 0.849 (BM1314). This supported the utility of these microsatellite loci in the measurement of genetic diversity indices in Indian sheep too. Various average genetic variability measures viz., allele diversity (5.7), observed heterozygosity (0.597), expected heterozygosity (0.694) and mean PIC (0.648) values showed high genetic variability despite accumulated inbreeding as reflected by the high average inbreeding coefficient ($F_{IS}=0.159$) due to the unequal sex ratio of the breeding animals.