• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.213-217
• /
• 2001

본 논문에서는 CPW 구조를 이용하여 60 GHz 무선 시스템 응용을 위한 V-band용 하향 주파수 혼합기를 설계 및 제작하였다. 하향 주파수 혼합기의 설계 및 제작에 있어서 GaAs PHEMT(Pseudomorphic high electron mobility transistor)를 기반으로 하였으며, 회로설계를 위해 coplanar waveguide(CPW) 라이브러리를 구축하여 이용하였다. 제작된 하향 주파수 혼합기의 변환이득은 국부발진주파수(LO) 입력이 8 dBm일 때 -8.5 dB의 최대 변환이득 특성을 얻었으며 Pl dB는 -3.3 dBm을 얻었다. 제작된 회로의 칩 크기는 1.6$\times$l.6 $\textrm{mm}^2$ 이다.

• Korean Journal of Plant Tissue Culture
• /
• v.25 no.5
• /
• pp.323-327
• /
• 1998

The flavonoid biosynthetic pathway has been studied as a genetic model system, particularly in Petunia hybrida. In order to study the flavonoid biosynthetic pathway, we constructed a fusion gene system between Cauliflower Mosaic Virus (CaMV) 35S promoter and eggplant flavonoid 3', 5'-hydroxylase in pBI 121 plasmid. An optimal condition for plant regeneration was observed when internode explants were cultured on MS medium supplemented with IAA 0.2 mg/L plus BA 3 mg/L. For plant transformation internode explants of Petunia hybrida were precultured on BM medium supplemented with IAA 0.2 mg/L plus BA 3 mg/L. Putative transgenic plants were selected on medium containing kanamycin 50 mg/L plus cefotaxim 300 mg/L. Putative selected transformants were confirmed by amplification of selectable marker gene (nptII) by polymerase chain reaction (PCR) and Southern hybridization of flavonoid 3',5'-hydroxylase gene.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.443-450
• /
• 2016

The linearization technique for low noise amplifier (LNA) has been implemented in standard $0.18-{\mu}m$ BiCMOS process. The MOS-BJT derivative superposition (MBDS) technique exploits a parallel LC tank in the emitter of bipolar transistor to reduce the second-order non-linear coefficient ($g_{m2}$) which limits the enhancement of linearity performance. Two feedback capacitances are used in parallel with the base-collector and gate-drain capacitances to adjust the phase of third-order non-linear coefficients of bipolar and MOS transistors to improve the linearity characteristics. The MBDS technique is also employed cascode configuration to further reduce the second-order nonlinear coefficient. The proposed LNA exhibits gain of 9.3 dB and noise figure (NF) of 2.3 dB at 2 GHz. The excellent IIP3 of 20 dBm and low-power power consumption of 5.14 mW at the power supply of 1 V are achieved. The input return loss ($S_{11}$) and output return loss ($S_{22}$) are kept below - 10 dB and -15 dB, respectively. The reverse isolation ($S_{12}$) is better than -50 dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3A
• /
• pp.296-301
• /
• 2011

GPS(Global Positioning System) service is more important than other wireless services. The GPS is necessary protected from any other interference signals. Therefore, GPS protection ratio was calculated on the basis of bit error rate(BER) in this paper. Simulation results show that the allowable maximum interference power is -190 dBm/Hz and the ratio of interference to noise(I/N) is -16 dB. The achieved protection ratio is available to be applied as the protection criteria of GPS in considering the implementation margin of 4 dB. As a result, the proposed protection ratio of GPS is expected to give standard for a stable GPS service.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.89-92
• /
• 2007

This investigation aims at calculating the geoid height, distance between the ellipsoidal height and the orthometric height by GPS/Levelling data for nationwide 58 Bench Marks, and calculating the effect of geoid height to engineering public works. The accuracy of the results from baseline analyses and adjustment of a network. using GPS surveying data by nationwide 58 BM show 4mm for horizontal direction and 7cm for vertical direction. The 58 geoid height was calculated by GPS/Levelling. For a construction work field GPS/Levelling for distributed 4 BM in test area can calculate the orthometric height in 20 ppm relativity accuracy with 95% reliability. Besides the calculated geoid height in the investigation was 0.367m higher than EGM96 model. The test results of a engineering work site, the result by EGM96 model was 1.8cm in 10km and it was also 3.6cm in interpolation method. The results show that it is equivalent to levelling of $20mm\sqrt{S}$.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.315-319
• /
• 2003

A novel method is developed to yield virus titers in 10 h, is easy to .perform using 96-well plates, and applicable to both any Autographa californica nucleopolyhyderovirus (AcNPV) and Bombyx mori nucleopolyhedrovirus (BmNPV)-based recombinant baculovirus. This assay uses an antibody to a DNA-binding protein to detect the infected cells via immune-staining. The titer is determined by counting foci produced due to infection of virus under a fluorescent microscopy. The required incubation period was shortened considerably because infected cells expressed viral antigens at the post infection time of 4 h. Therefore, 10 hours were enough to estimate the virus titer including virus infection time, insect cell culture, and estimation of virus titer.

• 한국정보통신설비학회:학술대회논문집
• /
• 2003.08a
• /
• pp.269-271
• /
• 2003

초고주파/밀리미터파 대역에서 전력증폭기의 효율을 향상시키기 위해 MEMS 튜닝회로를 설계하였다. MEMS 튜닝회로의 효과를 확인하기 위해 2차 및 3차 고조파를 억제할 수 있도록 3-stub Class-E 증폭기를 설계하였으며 또한 설계된 증폭기에 대해 시뮬레이션을 실시하였다. 시뮬레이션의 결과로서 8GHz에서 14dBm입력에 대해 MEMS가 적용된 증폭기의 성능은 PAE=66 9%, drain efficiency=75.89%, 그리고 출력 P=23.37 dBm을 얻었다. 또한 FET의 기생리액턴스의 변화에 대해서 MEMS 튜닝회로의 효율증대효과를 확인하였다. 결론적으로 이 연구에서 제안된 새로운 방법을 통해 증폭기의 효율향상을 위한 효과적인 방법이 될 수 있음 보여 주었다.

• Korean Journal of Optics and Photonics
• /
• v.11 no.3
• /
• pp.179-186
• /
• 2000

Optical coupling coefficients and misalignment tolerance of 155 Mbps optical transmitter module of passive alignment technology, to be usable in ATM system, B-NT (Broadband Network Termination) system, and 10 G transmission system for information super-highway networks, were calculated, compaired with it's engineer samples, and discussed. These engineer samples of -4.5 dBm maximum output power were packaged in the method of butt coupling of flat-fiber and tested reliability evaluation. Hence the cheap packaging method of optical transmitter module was researched. rched.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.6
• /
• pp.507-513
• /
• 2002

In this paper, the receiver using Heterodyne type is designed and implemented for a pulse radar at 9.4 GHz. The If amplifier, which occupies a significant size in a Heterodyne receiver for pulse radars, can be removed. Furthermore, by using detector logarithmic video amplifier in baseband, the receiver has a small size and it's characteristic shows a high dynamic range and sensitivity. From the results of measurements, the minimum receiver power of -70 dBm and selectivity of 55 dB are obtained.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.339-342
• /
• 2003

This paper describes an RF/IF module for 2.4GHz wireless video and audio receivers The designed circuits are implemented using a Teflon board of which the size is $53mm\times42mm$. The measured LNA gain is 15dB, and the VCO output levels are around 2dBm. The sensitivity of the receiver is about -80dBm. The manufactured module consumes 140nA from a 8V supply.