• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.921-923
• /
• 2001

In the field of factory automation, single phase induction motors are frequently used for speed control application because of its simplicity and low cost. In this paper, we compare the performances of a single phase induction type speed control motor with a BLDC motor. From the experimental results in the controllable torque-speed load range, the efficiency characteristics and safe operation load areas are compared for each type sample motor.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.9
• /
• pp.437-442
• /
• 2006

Cogging torque, the primary ripple component in the torque generated by permanent magnet (PM) motors, is due to the slotting on the stator or rotor. This article shows the reduction of cogging torque in a novel axial flux permanent magnet (AFPM) motor through the various design schemes. 3D finite element method is used for the exact magnetic field analysis. The effects of slot shapes and skewing of slot on the cogging torque and the average torque have been investigated in detail.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.697-698
• /
• 2008

This paper deals with finite element characteristic analysis of brushless DC motor according to magnetic property measurement methods. Magnetic property data for non-oriented (NO) electrical steel for electric motors are measured by the Epstein test which is considered as the international standards. Data from Epstein test may result in discrepancy from motor characteristic tests due to innate anisotropic property of NO electrical steel. Finite element analysis were performed for a BLDC motor by various measurement methods such as Epstein test, Ring test and single sheet test (SST), and calculated results were compared with considering anisotropic property conditions.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.824-827
• /
• 2003

Recently, Development of Rare Earth Permanent magnet with the high remanence, high coercivity allow the design of brushless motors with very high efficiency over a wide speed range. Cogging torque is produced in a permanent magnet by magnetic attraction between the rotor mounted permanent magnet and the stator teeth. It is an undesired effect that contributes to the machines output ripple, vibration, and noise. This cogging torque can be reduced by variation of magnet arc length, airgap length, magnet thickness, shifting the magnetic pole and varying the radial shoe depth and etc. In this paper, Some airgap length and magnet arc that reduce cogging torque are found by FEM(Finite element method). The SPM type of high-capacity BLDC motor is optimized as a sample model.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.2
• /
• pp.126-133
• /
• 2004

In this paper, a new current control algorithm is proposed for four-switch three-phase brushless DC(BLDC) motor drives, which are suitable for low cost applications. A current reference generation scheme is developed and implemented to obtain high performance characteristics in the four-switch system, such as small torque ripple and fast dynamic speed/torque response. Especially, the proposed scheme can successfully reduce the torque ripple during commutations, so that it can be expected that the four-switch system can be much more practically applied for the industrial application areas.

• Journal of KSNVE
• /
• v.10 no.6
• /
• pp.977-984
• /
• 2000

Vibration of disk drive spindle is one of the major limiting factors in achieving higher track densities in hard disk drives. Vibration of a BLDC motor is a coupled phenomenon between mechanical characteristics and magnetic origins through the motor air-gap. In this paper, radial magnetic forces for symmetric and asymmetric BLDC motor are calculated with respect to the various rotor eccentricity using analytic method. Based on the results of the radial magnetic forces, transient whirl responses of the spindle motor are analyzed using finite element and transfer matrices. Results show that an asymmetric motor has a worse effects on unbalanced magnetic forces and vibration when mechanical and magnetic coupling exists.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.109-112
• /
• 2001

In this paper, the development of the prototype electric vehicle for golf car is described. A brushless dc (BLDC) motor is applied as a prime mover. The BLDC motor is coupled directly to the reduction and differential gear system. The output power of the motor is decided to 2.2Kw at 3000 rpm, which is a general value of the golf car on the market today. The motor is driven by the microprocessor-based 3-phase PWM inverter system. We introduce the performance and functions of the BLDC motor and it's control system.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.831-832
• /
• 2006

본 논문에서는 Brushless DC Motors(이하 BLDC Motor이라 함)의 영구 자석의 오버행에 따른 진동, 소음 특성에 대하여 다루었다. 비대칭 오버행 구조에서는 Z축 방향 힘이 발생한다. 이는 베어링에 손상을 입힐 뿐 아니라 큰 노이즈와 진동을 유발시킨다. 따라서 진동과 소음의 감소를 위한 자석 오버행 효과 해석이 필수적이다. 본 논문에서는 비대칭 영구 자석 오버행 효과를 해석하고 BLDC Motor에서 발생하는 소음과 진동을 분석하였고 비대칭 영구 자석 오버행 효과를 고려하여 Z축 방향의 영향력을 계산하기 위하여 3차원 유한요소법(3D FEM)을 사용하였다.

• Journal of Magnetics
• /
• v.15 no.1
• /
• pp.40-44
• /
• 2010

This paper introduces two types of magnetization, and reports the effect of the magnetization direction on the iron loss in a brushless DC (BLDC) motor using a 2-D time-stepped voltage source finite-element method (FEM). The iron losses were found to consist of hysteresis and eddy current loss, which were calculated from the time variation of the magnetic field distribution. To confirm the analysis, a prototype BLDC motor was constructed with a sintered ferrite magnet. The analysis and experimental results suggest that the magnetization direction has a significant effect in terms of the iron loss characteristics of the BLDC motor.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.5
• /
• pp.449-456
• /
• 2017

This study proposes a method for compensating for the commutation torque ripple of delta-connected brushless DC motors with low inductance based on a current predictions. At the commutation instant, a phase current at the next sampling period is predicted and compared with the reference phase current to determine whether torque ripples will occur or not. If the predicted current cannot reach the reference phase current, the reference current is modified and the relevant voltage reference is produced to reduce the torque ripple. The validity of the proposed method has been verified by simulation and experimental results. The commutation torque ripple has been decreased by 17.7% at 1,000 rpm and 80% load conditions.