• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.1
• /
• pp.38-46
• /
• 2000

This study have established proper mathematical equivalent model of Brushless DC (BLDC) motor and estimated the motor parameter by means of the back-emf measurement as being the step input to the controlled target BLDC motor. And the validity of proposed estimation method is confirmed by the test result of step response. As well, we have designed the reasonable digital controller as a consequence of the root locus method which is obtained from the open-loop transfer function of BLDC motor with hall sensor, and the determination of control gain for variable speed control. Here, revised Ziegler-Nichols tuning method is applied for the proper digital gain establishment, and the system stability is verified by the frequency domain analysis with Bode-plot and experimentation.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.310-313
• /
• 2019

This paper used the majority function to digitally filter back-electromotive force as an explanation of the Brushless DC MOTOR control algorithm. The cause and improvement of motor noise, which are operating in close proximity to high frequency sources, did not use conventional low pass filter and comparator elements. Also, they repeatedly output a noise-free BEMF signal for the input value of the majority detection filtering. These filtering steps can help reduce costs and minimize the area of a PCB by requiring relatively little hardware.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.1
• /
• pp.35-41
• /
• 2014

This paper presents a design method of programmable low pass filter(PLPF) which reduce an estimation error of a zero crossing point(ZCP) for a high speed brushless DC(BLDC) motor drive. BLDC motor sensorless drive is possible by estimation of ZCP. The ZCP estimated by detecting a change of back-EMF polarity has the estimation error because noises exist on the measured back-EMF. Therefore a calculated commutation timing using the ZCP is inaccurate. And the inexact commutation timing leads to ripples of 3-phase current and degradation of drive performance. This paper proposes the design method of the PLPF to overcome these problems. First, a speed calculated a inaccurate period of the ZCP is analyzed in the frequency domain. Then, the PLPF that has varying cut-off frequency according to change of the speed is designed on the frequency analysis result. The proposed method is verified by the experiment.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.22-25
• /
• 1999

A brushless DC motor has the high quality of torque output and silence, has been more widely used in industrial area. As the driver and controller of BLDC motor have been more complicated and precise, simulation method has been much used in motor design. And the output characteristics of BLDC motor is determined by the waveform of BACK-KMF in instinct. But because the conventional model of BLDC motor is obtained by approximation of real nonlinear waveform to ideal trapezoidal waveform, the error is occurred in simulation result. Thus in this paper, for the correction of this error in simulation, the model of real nonlinear waveform considered is proposed, and the simulation result is obtained in case of three-phase, four-poles Y-connected, surface mounted permanent magnet BLDC motor.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.64-66
• /
• 2004

Several techniques have been adopted in motor design of interior permanent magnet (IPM) type brushless DC (BLDC) motor to minimize cogging torque. IPM type motor has better ability in the centralization of flux than surface-mounted permanent magnet (SPM) type BLDC motor. So, the structure of IPM type BLDC motor has high saliency ratios that produce additional torque. However, this structure has a significant cogging torque that generates both vibration and noise. This paper describes new technique of the flux barriers design for reduction of cogging torque of IPM type BLDC motor. To reduce the cogging torque, flux barriers are applied in the rotor. Changing the number of barrier, the cogging torque is analyzed by finite clement method(FEM).

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.4
• /
• pp.3-9
• /
• 2010

Recently, Applications of BLDC motor have grown gradually in energy savings and controls of speed and torque. But most of BLDC motors need controller and driving circuits aside from motor, according to various situations. In this paper, it was designed for a embedded controller and motor including microprocessor that programmable intelligent control as various circumstances. And in order that the user conveniently use better than to use web browser using TCP/IP module in controller.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.2
• /
• pp.151-153
• /
• 2010

This paper is presented for the development of the brushless DC(BLDC) motor for the spindle motor of hard disk drives(HDD). A new BLDC Motor has the use of insulated, compacted, and iron powder for the armature core material of BLDC motors. Insulated iron powder in this paper is generally called soft magnet composite(SMC). The SMC is used for the stator of the motor instead of the laminated steel core. The motor used by SMC can have the good advantages in condition of the high frequency input power and small sized motor. It gets much more high efficiency than laminated steel core at same input power. The proposed motor has a technique of speed sensorless control. Experimental results show the performance of the proposed BLDC motors for an HDD.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.8
• /
• pp.1217-1223
• /
• 2015

In this paper, we study the problem of torque ripple minimization in Brushless DC Motors (BLDC) and proposes a disturbance observer (DOB) based controller in order to efficiently reduce the torque ripple. In the DOB based control system, an equivalent disturbance (plant disturbance and effect of modelling error) is cancelled by its estimate. When the DOB controller is applied to BLDC motors, the effect of inverter switching is considered as an equivalent disturbance and to be cancelled by the DOB controller. Through computer simulations, it is shown that the performance of the proposed DOB controller is superior to that of the conventional PI controller. In the case where the numerical values of resistance and inductance are not known exactly, it is shown that the proposed DOB controller achieves better performance than the PI controller.

• Journal of Magnetics
• /
• v.20 no.1
• /
• pp.91-96
• /
• 2015

As many researchers are relentlessly trying to improve the power generation schemes from the power grid, to meet the constantly increasing electricity demand. In this paper, the results of a finite element analysis are carried out to study on a design optimization of an asymmetric air-gap structure in 3-phase Permanent Magnet Brushless DC Motors. To achieve a high efficiency for a 3-phase PM BLDC motor, the asymmetric air-gap structure is proposed considering the rotation direction of a motor. Generally, a single-phase BLDC motor is applied asymmetric air-gap structure for starting. This is because the asymmetric air-gap structure causes reluctance variation so the motor can utilize reluctance torque toward a rotation direction. In this paper, the asymmetric air-gap is applied to 3-phase BLDC SPM motor so it utilizes reluctance torque with alignment torque. A proposed model is designed by 2-D FE analysis and the results are verified by experimental test.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.27-28
• /
• 2011

본 논문에서는 싱글전류센서를 이용하여 브러시리스 직류 전동기의 속도제어시스템 시뮬레이션 방법 및 그 결과을 제시한다. BLDC 전동기 제어에 매우 중요한 역할을 가지고 있는 피드백 센서 방식으로 싱글 전류검출센서를 이용한 속도제어 방법은 모터 설계의 비용을 낮추고, 심플한 제어기 설계를 가능하게 한다. 또한, 전동기에 손상을 줄 수 있는 오류조건을 감지함으로서 신뢰성을 향상시켜 줄 수 있다. 시뮬레이션에 사용하는 BLDC 전동기는 3상 Y결선 전동기를 모델로 하며 MATLAB/SIMULINK를 사용한 시뮬레이션을 수행하여 그 성능을 분석하였다.