• Korean Journal of Veterinary Service
• /
• v.44 no.4
• /
• pp.299-303
• /
• 2021

A captive male polar bear (Ursus maritimus) was found dead after a long-term anorexia at a Park Zoo in Republic of Korea. At necropsy, the liver lesion was prominent with hepatomegaly carrying a big mass and numerous small nodules in various sizes. The cut surface of the nodules was creamy white, firm, and solid with umbilicated appearance. Histologically, there was proliferation of hepatocellular neoplastic cells arranged in glandular-like (pseudoglandular) pattern and complete loss of hepatocellular arrangement. The immunoreactivity for neoplastic hepatocyte antigens was positive for hepatocyte paraffin 1, and negative for vimentin, cytokeratin 7 and 19, and carcinoembryonic antigen. Based on those diagnostic features, the neoplasia was diagnosed as hepatocellular carcinoma. To the author's knowledge, this is the first case report of hepatocellular carcinoma in the captive polar bear in Republic of Korea.

• Journal of ILASS-Korea
• /
• v.26 no.4
• /
• pp.189-196
• /
• 2021

Spray drift of agricultural nozzles has become a big issue because it causes low precision targeting and environmental pollution. In order to reduce the spray drift, study spray characteristics of agricultural nozzles is virtually important. In this study, shadowgraph and Mie-scattering visualization techniques were used to study the macroscopic spray and atomization characteristics of an agricultural nozzle. PDPA was used to measure the atomization characteristics of spray. The injection pressure is set to 1 bar, 3 bar and 5 bar, which covers the working range of the nozzle. For the PDPA experiment, 75 points were measured in an area of 160 mm × 120 mm at 10 mm intervals directly below the nozzle to grasp the overall atomization characteristics of the spray. It was found that the spray width and sheet width showed a linear correlation. As the injection pressure increased, the sheet expansion in the 0-degree direction and the sheet swing in the 90-degree direction jointly promoted the breakup of the sheet. In addition, the area close to the central axis had a large droplet velocity, and since a large droplet velocity promoted atomization of spray, the area close to the central axis had a smaller spray droplet diameter than the left and right regions.

• Journal of the Korea Safety Management & Science
• /
• v.24 no.4
• /
• pp.109-116
• /
• 2022

This study attempted to explore how the perception of the necessity of safety education for adolescents affects fire safety consciousness and whether personality factors control the relationship. To this end, a survey was conducted at a high school in region C, and data of 1,049 people who agreed to the survey and responded faithfully were used for analysis. Hayes' macro was used to analyze the moderating effect, and as a result of the analysis, adolescents' awareness of the need for safety education increased, and their relationship was significantly regulated by extroversion, openness, and conscientiousness among the five personality factors. A simple regression line analysis was conducted to find out the specific direction, and it was found that the higher the need for safety education in both the group with high extroversion, openness, and conscientiousness, the higher the awareness of safety education. These results suggest that changes in educational methods and contents are needed to raise awareness of the necessity of education in fire safety education and to improve educational motivation, and that it may be helpful to actively utilize students' personality strengths in education.

• The Journal of Information Systems
• /
• v.31 no.4
• /
• pp.47-73
• /
• 2022

Purpose The purpose of this study is to select the electronic architecture concept of the powertrain domain of the electronic platform to be applied to electric vehicles after 2025. Previously, the automotive electrical and electronic architecture was determined only by trend analysis, but the purpose was to determine the scenario based on the data and select it with clear evaluation indicators. Design/methodology/approach This study identified the function to be applied to the powertrain domain of next-generation electric vehicle, estimated the controller, defined the function feature list, organized the scenario candidates with the controller list and function feature list, and selected the final architecture scenario. Findings According to the research results, the powertrain domain of electric vehicles was selected as the architectural concept to apply the DCU (Domain Control Unit) and VCU (Vehicle Control Unit) integrated architecture to next-generation electric vehicles. Although it is disadvantageous or equivalent in terms of cost, it was found to be excellent in most indicators such as stability, security, and hardware demand.

• International Journal of Advanced Culture Technology
• /
• v.10 no.4
• /
• pp.1-7
• /
• 2022

The purpose of this study is to review the appropriateness of deploying private security guards using SMS emotional language analysis at the current assembly and demonstration sites, which rely only on the police force, and to suggest a plan. Therefore, it is intended to contribute to suppressing the problems at the assembly and demonstration sites and present a new paradigm for responding to the assembly and demonstration sites based on the study's results. First, it is necessary to prepare a legal basis for the deployment of private security guards in the 'Security Services Industry Act' and 'Assembly and a Demonstration Act'. Second, there is a need for a 'security company selection criteria' for selecting security companies with a lot of experience, such as collective civil petition sites and security for national critical facilities (special security services). Third, it is necessary to prepare financial resources for the deployment of private security guards. This study is expected to serve as a new cornerstone for effective management of assembly and demonstration sites through mutual complementation of the police and private security.

• International Journal of Advanced Culture Technology
• /
• v.10 no.4
• /
• pp.569-575
• /
• 2022

This is a research thesis on the development of a monitoring and diagnosis device that prevents the risk of an accident through monitoring and diagnosis of a modular Main Circuit Breaker (MCB) using Vacuum Interrupter (VI) for Korean high-speed rolling stock. In this paper, a comprehensive MCB monitoring and diagnosis was performed by converging vacuum level diagnosis of interrupter, operating coil monitoring of MCB and environmental temperature/humidity monitoring of modular box. In addition, to develop an algorithm that is expected to have a similar data processing before the actual field test of the MCB monitoring and diagnosis device in 2023, the cluster analysis and factor analysis were performed using the WEKA data mining technique on the big data of Korean railroad transformer, which was previously researched by Tae Hee Evolution with KORAIL.

• International Journal of Advanced Culture Technology
• /
• v.10 no.4
• /
• pp.453-459
• /
• 2022

This study attempted to explore the realization and research direction of a successful metaverse environment in the future by analyzing international research trends of the metaverse using topic modeling. A total of 208 papers among WoS and ScienceDirect papers using metaverse as keywords were selected, and quantitative frequency analysis and topic modeling were performed. As a result, it was confirmed that research has rapidly increased after 2022. The main keywords of the research topics were 'second', 'life', 'learning', 'reality', 'metaverse', 'virtual', 'blockchain', 'nft', 'medical', 'avatar', etc. The topic keywords 'Second life & Education' and 'Virtual Reality & Medical' accounted for a large proportion of 57%, followed by 'Blockchain & Cryptocurrency', 'Avatar & Interaction', and 'Sensing and Device'. As a result of semantic analysis, current metaverse research is focused on application and utilization, and research on underlying technologies and devices is also active. Therefore, it is necessary to identify the commonalities and differences between domestic and foreign studies, and to study the application method considering the domestic environment. In addition, new jurisprudence research is more necessary along with predicting new problems. It is expected that the results of study will provide the right research direction for domestic researchers in the era of digital transformation and contribute to the realization of a digital society.

• Journal of KIBIM
• /
• v.12 no.4
• /
• pp.1-18
• /
• 2022

New Fabrication Facility (FAB) construction is performed with Building Information Modeling (BIM) based design. The BIM design data keep updated during the FAB construction. To improve fast-track construction management, a Fabrication Facility Augmented Reality (FABAR) was developed. This study introduces a FABAR system development process and shows performance evaluation results of the FABAR prototype system. The FABAR is implemented with three major modules: Augmented Reality (AR) visualization unit (Room-box) to transfer big BIM data to AR data, AR registration and tracking unit to match AR with real scape and to keep AR coordination in real, and AR data management unit to enhance usability. The prototype performance results were as follows: visualization of design BIM data via AR within 24 hours, precise AR registration and tracking registration, and appropriate usability to support FAB construction management at site. The results indicate that the FABAR is applicable for FAB construction management. Especially, the BIM data transformation method using Room-box in this study signifies a new construction management approach using fluctuating BIM design data in the fast track construction condition.

• Journal of Navigation and Port Research
• /
• v.46 no.5
• /
• pp.458-470
• /
• 2022

As the 4th industrial revolution progresses, the application of several cutting-edge technologies such as the Internet of Things, big data, and mixed reality (MR) in relation to autonomous ships is being considered in the maritime logistics field. The aim of this study was to apply the concept of a digital twin model based on Human Machine Interaction (HMI) including a digital twin model and the role of an operator to a ship. The role of the digital twin is divided into information provision, support, decision, and implementation. The role of the operator is divided into operation, decision-making, supervision, and standby. The system constituting the ship was investigated. The digital twin system that could be applied to the ship was also investigated. The cloud-based digital twin system architecture that could apply investigated applications was divided into ship data collection (part 1), cloud system (part 2), analysis system/ application (part 3), and MR/mobile system (part 4). A Mixed Reality device HoloLens was used as an HMI equipment to perform a simulation test of a digital twin system of an 8 m battery-based electric propulsion ship.

• Journal of the Korean Society of Safety
• /
• v.37 no.4
• /
• pp.73-79
• /
• 2022

In this study, real fire tests were performed on representative combustibles of residential facilities to analyze the fire behavior and combustion characteristics in a small residential space. The considered combustibles were a sofa, a combination of a desk and a chair, and a combination of a mattress and an electric mat. A compartment space fire test was performed using the room corner test equipment prescribed in the KS F ISO 9705 specification. Three real fire tests were conducted by placing the combustible material inside a small compartment with insulation and finishing materials and by igniting the combustible material. Results showed that the peak heat release rate and peak smoke production rate occurred in the combination of the mattress and electric mat. Furthermore, from the result of the fire rate analysis, it was estimated that the fire risk of the mattress and electric mat combination was the highest, followed by the sofa and thedesk and chair combination.