• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.33.2-33.2
• /
• 2011

The 'NREL Phase VI' model with a 10.06m diameter was tested in the NASA Ames tunnel to make a reference data of the computational models. The test was conducted at the one rotational speed, blade tip speed 38m/s and the Reynolds number of the sectional airfoils in that test was around 1E6. The 1/5 scale down model of the 'NREL Phase VI' model was used in this paper to study the power characteristics in low Reynolds number region, 0.1E6 ~ 0.4E6 which is achievable range for the conventional wind tunnel facilities. The torque generated by the blade was directly measured by using the torque sensor installed in the rotating axis for a given wind speed and rotational speed. The power characteristics below the stall condition, lambda > 4, was presented in this paper. The power coefficient is very low in the condition below the Re. 0.2E6 and rapidly increases as the Re. increases. And it still increases but the variation is not so big in the condition above the Re. 0.3E6. This results shows that to study the performance of the wind turbine blade by using the scaled down model, the Re. should be larger than the 0.3E6.

• Korean Journal of Community Nutrition
• /
• v.2 no.4
• /
• pp.633-646
• /
• 1997

Korea has not tried any food consumption survey so far except the national nutrition survey, which does not show food consumption patterns of different income stratas. The results of the family income and expenditure survey(FIES) by the national statistical office can be precious sources which show household food consumption patterns due to large, random. Samples, year-round survey period and socioeconomic background data. This study analyzed the FIES data to find out food consumption patterns including nutrient intakes and frequently consumed foods by households among different monthly income levels. Big difference was found in food consumption patterns among the quartile-income groups especially the amount of consumed foods, food expenditure, and nutrient intakes. For every food item, the higher the monthly invomr, yhr motr og goof yhry vondumrf. The monthly food expenditure of higher higher income strata was composed with higher percentage of relatively expensive foods compared to other stratas. Nutrient intake levels of lower income strata were 50-60% of the RDA, which showed the necessicity of food assistance programs for those high risk groups to complement the nutritional difficiency. (Korean J Community Nutrition 2(4) : 633-646, 1997)

• Journal of Sensor Science and Technology
• /
• v.14 no.4
• /
• pp.237-243
• /
• 2005

Strain gauge type load cell is used widely as weight sensor. However, it has problems such as noise, power consumption, high cost and big size. Semiconductor type piezoresistive pressure sensor is practically used in recent for low hysteresis, good linearity, small size, light weight and strong on vibration. In this paper, we have fabricated the piezoresistive pressure sensor and packaged the miniature weight sensor. We packaged the miniature weight sensor by flip-chip bonding between die and PCB for durability, because the weight sensor is directly contacted on a physical solid distinct from air and oil pressure. We measured the characteristics of the weight sensor, which had the output of $10{\sim}80$ mV on the weight range of $0{\sim}2$ kg. In the result, we could fabricate the weight sensor with an accuracy of 3 %FSO linearity.

• Applied Microscopy
• /
• v.43 no.4
• /
• pp.140-145
• /
• 2013

Structural aspects of highly reduced vegetative organs in the aquatic Spirodela polyrhiza were examined using scanning and transmission electron microscopy. The study focused mainly on young and mature fronds with turions and their cellular features were compared. Mature fronds were composed of thin-walled chlorenchyma with highly vacuolated cells; most of which were frequently occupied by either tanniferous deposits or various crystals. Fronds of photoautotrophic offspring were produced from the meristematic region of the reproductive pockets within mother fronds, where they remained until separation. Moderate degrees of wall ingrowth and plasmalemma proliferation were detected briefly in the epidermis of daughter fronds during early development. Vascular tissues were generally much reduced, but air chambers were well-established in fronds. Chloroplasts having grana with several thylakoids were distributed throughout the plant, but starch grains were encountered frequently in the mesophyll chloroplasts of younger fronds and initial stage of the turion. Their cytoplasm was dense with small vacuoles in most cases. Further, big starch grains, up to several microns, occupying most of the plastid volume were formed in the turion prior to sink for overwintering. Plasmodesmata were numerous in the examined tissues, except mature turions, suggesting a symplastic pathway of the metabolites within body.

• Journal of Information Technology Services
• /
• v.16 no.4
• /
• pp.161-176
• /
• 2017

Recently, most of the users can easily get access to a variety of information sources about companies, products, and services through online channels. Therefore, the online user evaluations are becoming the most powerful tool to generate word of mouth. The user's evaluation is provided in two forms, quantitative rating and review text. The rating is then divided into an overall rating and a detailed rating according to various evaluation criteria. However, since it is a burden for the reviewer to complete all required ratings for each evaluation criteria, so most of the sites requested only mandatory inputs for overall rating and optional inputs for other evaluation criteria. In fact, many users input only the ratings for some of the evaluation criteria and the percentage of missed ratings for each criteria is about 40%. As these missed ratings are the missing values in each criteria, the simple average calculation by ignoring the average 40% of the missed ratings can sufficiently distort the actual phenomenon. Therefore, in this study, we propose a methodology to predict the rating for the missed values of each criteria by analyzing user's evaluation information included the overall rating and text review for each criteria. The experiments were conducted on 207,968 evaluations collected from the actual hotel evaluation site. As a result, it was confirmed that the prediction accuracy of the detailed criteria ratings by the proposed methodology was much higher than the existing average-based method.

• Journal of Information Technology Services
• /
• v.16 no.4
• /
• pp.1-13
• /
• 2017

This study examines how specific technology from Information and Communications Technology (ICT)-which plays a critical role in increasing productivity by promoting a spread of technology across the society though the use of big data, mobile or wearable devices-impacts of the productivity of society and productivity of added values, respectively. The impact of technology was studied from the perspective of efficiency levels of input. In order to provide an analysis, we have categorized ICT into 16 specific technologies and have set the number of companies and number of employees each as an input factor while setting the respective output and the output of added values as an output factor. Afterwards, we have applied data envelopment analysis (DEA) which is a form of nonparametric frontier analysis and measured the productivity and efficiency of added values for each technology. According to the analysis results, there were 2 technologies by the CRS standards, and 3 technologies by the VRS standards that showed relative efficiency levels. We have also presented some efficiency improvement strategies for specific technologies that revealed relative inefficiency and offered a reference set and projection point. In addition, we provide an analysis on scale efficiencies (SE), diminishing returns to scale (DRS), and increasing returns to scale (IRS) of each ICT.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.2
• /
• pp.212-223
• /
• 2004

The purpose of this study is 1) to identify Chinese environment for investment and apparel market, 2) to analyze the current situations of Korean fashion brands＇entry to Chinese market, 3) to analyze the marketing strategies to China according to product category, and 4) to identify merits and problems of Chinese market. For data collection, secondary resources were collected, and the telephone interview with merchandisers were implemented with brand managers. Twenty-one fashion brands were included for the study. Results of the study were as followed： 1) China was a big potential apparel market due to its rapid economic growth. Apparel purchase behavior and clothing preference of Chinese consumers were various by regional groups. 2) The motives of entry to China were to competition in domestic markets, saving raw material cost. The entry modes to China were direct export, license and regional manufacturing system. 3) Marketing strategies were to pursue high quality branding, high pricing and placing strategies with high-class department stores. Also star marketing were used with ＂Han Rue＂. Also various promotion strategies were implemented such as fashion show and unique VMD. 4) The merits of Chinese market were high potential market for export, close proximity, cultural similarity and Han-Ryu syndrome. Problems of Chinese market for export were lack of experts on Chinese market, fierce competition in China, and unstable economic policies.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.4
• /
• pp.646-660
• /
• 2017

This study provides basic data to develop a brassiere pattern that can cover the big breast of breast enlargement patients. In this study, we also showed areas of the brassiere cup pattern and the body surface of the breast on a breast enlargement patient. The results of the study are as follows. Correlation analysis was obtained between volume and body surface area and breast detail dimensions. After the correction process, we proposed a research bra pattern for breast augmentation patients. The cup-boundary in bra patterns of breast enlargement surgery patients is longer than the bra patterns of the general breast; therefore, the height of the inner and outer edges of the upper cups is higher. Also, it is necessary to set the new breast upper point when measuring the upper length in patients with breast augmentation surgery because the points of circumference of the breast are marked higher than chest circumference.

• Journal of Biosystems Engineering
• /
• v.1 no.1
• /
• pp.49-54
• /
• 1976

No reliable basic data were available on the kinetic friction coefficients between grains and frictional surfaces being used in grain handling equipments in Korea. In order to determine appropriate kinetic friction coefficient between three grains (Tongil, Jinheung, barley) and two surfaces at four levels of moisture content of grain, the laboratory tests using the newly designed experimental apparatus and strain gage measuring system were carried out, and the relationship among factors that affect kinetic friction coefficients of grains were analyzed. The results of this study are summarized as follows ; 1. Kinetic friction coefficient of samples being tested was dependent on surfaces and moisture content of grains . The ranges of them were 0.369-0.512 for Tongil variety , 0.347-0.469 for Jinheung variety, and 0.360-0.502 for barley, respectively. 2. There was a little difference of kinetic friction coefficients between two varieties of rice at the same testing conditions. Because the interaction had been large among treatments , each value of kinetic friction coefficient determined in this study should be used only for the corresponding conditions in this study . 3. Kinetic friction coefficients in creased linearly with increase in moisture content of grains and their regression equations were shown in Table.4. 4. Kinetic friction coefficients on a PVC surfaces was shown a little lower values than on the steel surfaces at various moisture levels, but especially in Jinheung and barley, a big difference was shown.

• Genomics & Informatics
• /
• v.13 no.4
• /
• pp.112-118
• /
• 2015

The intron has been a big biological mystery since it was first discovered in several aspects. First, all of the completely sequenced eukaryotes harbor introns in the genomic structure, whereas no prokaryotes identified so far carry introns. Second, the amount of total introns varies in different species. Third, the length and number of introns vary in different genes, even within the same species genome. Fourth, all introns are copied into RNAs by transcription and DNAs by replication processes, but intron sequences do not participate in protein-coding sequences. The existence of introns in the genome should be a burden to some cells, because cells have to consume a great deal of energy to copy and excise them exactly at the correct positions with the help of complicated spliceosomal machineries. The existence throughout the long evolutionary history is explained, only if selective advantages of carrying introns are assumed to be given to cells to overcome the negative effect of introns. In that regard, we summarize previous research about the functional roles or benefits of introns. Additionally, several other studies strongly suggesting that introns should not be junk will be introduced.