• Journal of Korea Game Society
• /
• v.20 no.4
• /
• pp.111-124
• /
• 2020

This paper analyzed the dialogue language of 'Maple Story' NPC from the perspective of learned optimism. Not only is NPC's language a key skill in artificial intelligence language, it also plays a big role in giving game users fun and desire to achieve. In this paper, as a result of analyzing the dialogue language of NPCs by utilizing the two key dimensions of NPC's learned optimistic explanation form: permanence and pervasiveness, the rate of characters' conversations using optimistic languages was 6%~7%. It was confirmed the important consideration in NPC artificial intelligence development.

• Journal of computational fluids engineering
• /
• v.21 no.1
• /
• pp.58-63
• /
• 2016

This research is to investigate the performance analysis for efficient design with four different inlet angles of the centrifugal pump impeller. Assuming that the rotation speed and exit angle are fixed, Four cases of the centrifugal pumps were numerically analyzed using ANSYS FLUENT. According to the numerical results, head and pump efficiency at inlet angle of 20 degrees was highest. There is no big difference of efficiency at inlet angle of 20 degrees compared to the inlet angle 30 degrees. About 15% of efficiency at inlet angle of 20 degrees is higher than inlet angle of 40 degrees and 31% higher than inlet angle oof 50 degrees. Because there is liner functional relationship between speed and flow rate, suction flow rate at inlet angle of 20 degrees is superior to the inlet angle of 30 degrees as much as 0.89%, inlet angle of 40 degrees as 13%, inlet angle of 50 as 28.4%. Head at inlet angle of 20 degrees is superior to the inlet angle of 30 degrees as much as 0.4%, inlet angle of 40 degrees as 2.7%, inlet angle of 50 degrees as 3.2%. There should exist highest efficiency and also optimal design shape at inlet angle of 20 degrees.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.732-737
• /
• 2000

The purpose of this study is to compare the SMD(Sauter mean diameter) with different vibrant plates. Each vibrant plates have different surface roughness. Also liquid film thickness are measured for explanation how to concern atomization. Ultrasonic waves is used for vibration. Immersion liquid method is used for the measure of SMD and also liquid film thickness is measured using of point needle method. Distilled water and gasoline fuel are used to liquids. Supplied liquid flow rates are $18{\sim}296cc/min$. Centerline average roughness of vibrant plates are 0.5, 2.0, 4.7, $9.5\;{\mu}m$ and diameter of vibrant plate is 60mm. In result, good atomization of liquid is obtained in widen flow rates. The mean droplet size is increased in orders of 4.7, 2.0. 9.5, $0.5\;{\mu}m$ surface roughness. Distilled water has a big mean droplet size than gasoline fuel in low flow rate. Above the 78cc/min flow rates, distilled water has a small mean droplet size than gasoline fuel. Liquid films changes are measured with ultrasonic power. Also, cavitation effect on sprays is observed.

• The Research Journal of the Costume Culture
• /
• v.8 no.4
• /
• pp.611-622
• /
• 2000

The purposes of this study are as follows. First, it is to review the features of discount stores that are expected to grow rapidly and continuously due to their low price, low cost, bulk purchase, and multiple shops, and to pinpoint problems arising from the establishment and position of the stores. Second, it is to analyze relevant issues in regard to the present status of fashion good distribution in discount stores by studying the situation, structure and problems of domestic fashion distribution along with the present status of the distribution in discount stores, and to suggest directions for the development of fashion distribution and discount stores. A positive study was carried out on the buyers of big domestic discount stores through one-to-one interviews focusing on the distribution of fashion products within Seoul and the Metropolitan area. The following is the directions for the development of clothing distribution and discount stores ; 1. The relative importance of fashion goods in a discount store will be increased with the tendency of fashionable and differentiated shops ; 2. The GMS or category killers will be established from around 2003 when the market is expected to become saturated with a great deal of discount stores. 4. Discount stores will change and reform without being restricted to a certain existing industry or business condition, and distribution channels will diversify over the border. The demand and supply system will be balanced based on a global marketing which will be adjusted on the international level.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.4
• /
• pp.27-39
• /
• 2015

This study addressed the process to construct, operate, verify the test beds, which had been equipped with a variety of core technologies such as WAVE, Road-Radar, Smart Tolling developed by Smart Highway Project. We have met our research goals, but there were limitations to secure the performance and user feedback because of small scale and short operating time. So, we will enhance user safety, convenience and comfort by accumulating and analyzing big data then improving testbeds and related technologies through subsequent research projects for a long time.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.4
• /
• pp.605-610
• /
• 2010

In order to design a touch interface for the elderly, human performance of input tasks on the touch screen was investigated by the laboratory experiment. Input times and input errors were measured in the experimental conditions that were changed according to age, key size, interkey space and input tool(finger or stylus pen). In the most of all experimental conditions, the task performance of the elderly was lower than that of the young. However, there were significantly different performance patterns between both groups. As the difficulty of task was getting higher, the task performance of the elderly was sharply decreased; pressing small key button by finger sharply increased input time and error rate, compared to that of the young. Therefore, the square key size suitable to the elderly may be over $8.0{\times}8.0mm$. While the interkey space did not influence to the input task performance of the young, the task performance of the elderly was influenced. The elderly showed big difference of task performance according to input tool. However, the young were less influenced by input tool.

• Journal of the Ergonomics Society of Korea
• /
• v.26 no.4
• /
• pp.49-56
• /
• 2007

Handles on objects are very important to increase the safety and efficiency of manual handling of people who use them. In this study, four different prototype cartons combined with auxiliary handles were designed to determine the optimal handle position of cartons through the evaluation of user preferences. Twenty male students are participated in the experiment. Likert-5 point summated rating method was applied to evaluate the user preferences for provided handles of the carton among upper, middle, and lower position under the four different sizes and materials handling conditions(carrying positions). The results show that the subjects preferred upper part of the handle on the small cartons regardless of the carrying positions while upper and middle parts of the handle on the big cartons for handling above the waist height were preferred. An optimal handle position depending on the different sizes of carton and the different carrying positions were recommended based on the results of evaluation. It is thus recommended that the cartons provide handles on its relevant position depending on the size and materials handling condition to reduce the musculoskeletal stress and in turn to increase the user satisfaction.

• Korean Journal of Plant Resources
• /
• v.30 no.6
• /
• pp.670-678
• /
• 2017

Persimmon seeds contain considerable amounts of minerals, amino and organic acids, natural antioxidants and phenolic compounds. The objective of this study was to investigate quality characteristics and antioxidant potential of Korean persimmon seeds. The pH (4.88-4.94), color values, contents of minerals, free amino acids, organic acids, and phenolic compounds and DPPH free radical scavenging potentials of persimmon seed extracts significantly (p < 0.05) varied with the genotypes. This study showed that the seeds could be used as a source of different mineral elements (47.14-85.07 mg/kg) without any measureable amount of heavy metals such as arsenic, cadmium, lead and mercury. Similarly, considerable amounts of organic (1550.13-2413.08 mg/kg) and essential amino (50.85-54.03 mg/kg) acids and total phenolic compounds ($1227.91-1307.78{\mu}g$ gallic acid equivalent/g) were also found in the seed extracts, indicating their potential food value as a natural antioxidant. Results of the present study imply that prethanol-A, a food preservative, can be used as an effective extraction to obtain the minerals, organic and free amino acids, and phenolic compounds from the persimmon seeds, which possess a big potential to be commercially used in food, cosmetic and pharmaceutical industries.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.584-588
• /
• 2007

A comparative Life Cycle Assessment(LCA) among three types of Electric Motor Unit(EMU) Interior Panel(IP) was conducted. A functional unit for comparative LCA is a weight of IP for 1 EMU. It assumed that Manufacturing stage and its upstream processes, Use stage and End of Life(EoL) stage are included in the boundary of product system. For Use stage, the weight of IP causes electricity consumption. It is assumed that aluminum IP is recycled and the other IPs are incinerated at the EoL stage. As comparison results, aluminum IP has much larger environmental impact(5.162pt) than others(FRP IP; 4.069pt, Phenol IP; 4.053pt) even though recycling consideration is included. The manufacturing stage of aluminum has relative big envrionmental impact(1.824pt) and this point make the most important difference from other IPs(FRP IP; 0.1617pt, Phenol IP; 0.4534pt)). Despite of large weight difference between FRP IP(888.56Kg) and phenol IP(315Kg), the final environmental impact result has only little difference(0.016pt, 0.39%). With this result, the EMU designer can choose IP with a consideration of the environmental performance of IP.

• Journal of the Korean Institute of Gas
• /
• v.19 no.1
• /
• pp.45-50
• /
• 2015

This study is an analysis of characteristics and the causes of serious accidents in chemical industry. The statistical analysis was focused on preventive facilities, equipment failures, accident materials and instabilities of workers and employment type. First, it showed that the highest number of the victims of accidents were involved in the industry of chemical materials and chemical products among the investigation of the manufactural industries. Also, particularly, they were investigated to be focused on the occurrence of the serious accidents in preventive facilities. Secondly, the most of the victims of serious accidents were found out not to be temporary or part-time worker but regular workers and most of the accidents occur in the form of big accidents involving more than 4 workers.