• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.45 no.4
• /
• pp.267-275
• /
• 2009

According to the recent statistics of marine casualties in Korea, fishing boats are more likely to be ended in the casualties, and small fishing boats especially cause much more accidents in sinking and capsizing than any other big vessels. These casualties were mainly produced from the ignorance on the lack of own ship stability. From this view, this study aims to analyze the characteristics of stability on the crab trap fishing boat receiving transverse wave by means of carrying out the water tank test. The rolling angle of the model ship was affected largely with the displacement and the wave period of it, and the trends were shown that the magnitude of the angle was proportional to the displacement, but inversely to the wave period. And the wave height had effect on the rolling angle just in the specific range of the wave period. The force of steady wind didn't have influence on the rolling variation significantly.

• Journal of the Korean Society of Safety
• /
• v.32 no.4
• /
• pp.122-128
• /
• 2017

Recently, accidents such as human accidents are increasing rapidly due to natural disasters and changes in social conditions due to abnormal weather. As a result, damage has been causing massive damage unlike the past. In the case of small and medium enterprises excluding financial institutions and big company, there is no system for prevention and restoration for stable operation from various risks such as human and natural disasters. As the current disaster continues, public and private companies have raised the need for BCM, and with the introduction of the ISO22301 certification system, the company has been establishing and operating Enterprise Disaster Management Standards in the Ministry of Public Safety and Security since 2007. However, in most SMEs, it is hard to bear the input of internal labor and investment cost, and there is a lack of personnel with expertise to conduct BCM diagnosis. Therefore, in this paper, we will study the diagnosis level of enterprise continuity plan which is commonly used in Korea and abroad. Based on this, we will study the BCM system diagnosis method which can be applied to small and medium enterprises in Korea efficiently.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.4
• /
• pp.183-189
• /
• 2018

The focus of this paper is to design and control a three fingered hand system with eight axes for smart factory with an flexible controller, and to keep a useful big database for dynamic manipulation based on the experimental results. The weight of the hand module is only 1.2 kg, but flexible motion and powerful grasping are possible. To achieve such a flexible motion control of a robotic hand, we have developed a robust and precise fingered hand with a control system incorporating image recognition system in which we deal with the problems of not only accuracy and range of motion but also the flexibility of hand. The fingers are arranged so as to grasp both circular and prismatic objects. In order to achieve the light mechanism, we reduced the number of joints and fingers as much as possible. In this study, it was used three fingers with eight axes which is the optimal number to achieve a robust grasping diverse shape parts for smart factory.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.4
• /
• pp.5-9
• /
• 2016

In the modern industrial society, huge amount of organic wastes have exceeded the society's self-cleaning capability, caused pollution of the whole environment, including water quality, soil, and the air, and become a big burden of waste treatment. Moreover, the emission of green house gases brought by the continual combustion of fossil fuels has facilitated the global warming. The simultaneous effect of initial and operational pH on $H_2$ yield was expressed using mathematical equation and optimized. The optimal initial and cultivation pH was 7.50 and 6.01, respectively. Addition of livestock wastewater to food waste substantially decreased the amount of alkali requirement and also improved the $H_2$ fermentation performance.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.18 no.4
• /
• pp.282-290
• /
• 2015

In this study, a latching control technology, proposed by Sheng et al.(2015), was applied in order to maximize the extraction efficiency of WEC (Wave Energy Converter), which is the heaving buoy coupled with linear electric generator. The latching control is the phase-control technique for improving the wave energy conversion with appropriate latching duration of keeping the buoy fixed. From the time-domain analysis in regular waves, the latching control technology can significantly improve the heave velocity and extracted power, even though the resonance condition is not satisfied. By using the latching control technology, the draft of buoy as well as the required PTO damping force can be significantly reduced along with increased extracted power, which is a big advantage in manufacturing the WEC.

• Journal of Astronomy and Space Sciences
• /
• v.31 no.4
• /
• pp.285-294
• /
• 2014

The uneven mass distribution of the Moon highly perturbs the lunar spacecrafts. This uneven mass distribution leads to peculiar dynamical features of the lunar orbiters. The critical inclination is the value of inclination which keeps the deviation of the argument of pericentre from the initial values to be zero. Considerable investigations have been performed for critical inclination when the gravity field is assumed to be symmetric around the equator, namely for oblate gravity field to which Earth's satellites are most likely to be subjected. But in the case of a lunar orbiter, the gravity field of mass distribution is rather asymmetric, that is, sectorial, and tesseral, harmonic coefficients are big enough so they can't be neglected. In the present work, the effects of the first sectorial and tesseral harmonic coefficients in addition to the first zonal harmonic coefficients on the critical inclination of a lunar artificial satellite are investigated. The study is carried out using the Hamiltonian framework. The Hamiltonian of the problem is cconstructed and the short periodic terms are eliminated using Delaunay canonical variables. Considering the above perturbations, numerical simulations for a hypothetical lunar orbiter are presented. Finally, this study reveals that the critical inclination is quite different from the critical inclination of traditional sense and/or even has multiple solutions. Consequently, different families of critical inclination are obtained and analyzed.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.6 no.4
• /
• pp.44-50
• /
• 2015

The finite element analysis of large sized rectangular water tank structures made of stainless steel materials is carried out for various combined load cases. The combined load cases for a large size of 5,000ton are further determined using the specification(KS B 6283) established from the Korean Standards Association. For the better numerical efficiency, the rectangular panels are modelled using the ANSYS program. The numerical results obtained for different load cases show as follows. In order to resist the snow load, it takes the influence of the gap than the size of the column. Also, in order to resist the water pressure, it shall increase the thickness of the wall. But, increasing the thickness of the wall is considerably less economical. Therefore, the angle with big thickness should be placed right next to the wall.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1603-1608
• /
• 2012

This paper aims to build a model of unemployment duration, in which each type of unemployment duration can be defined as a function of other exogenous variables. Recently, the so-called mismatch in the labor market has become a big issue in most countries. It is very obvious that 'mismatch' is deeply related to the long duration of unemployment status. Two problems may be head and tail of the same coin. Employing a simple analysis of Markov stochastic process, the model of unemployment duration developed here is useful for seeing the effects of shocks on unemployment duration. The model allows us to distinguish the determinants of different kinds of unemployment and to identify the nature of unemployment duration.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2001.05b
• /
• pp.129-132
• /
• 2001

The purpose of this research was to understand possibility of foodwaste treatment by hybrid anaerobic reactor(HAR). The Possibility of methane utility and applicability of hybrid reactor system using foodwaste as substrate was investigated. The maximum loading rate and optimized operational conditions were determined. Hybrid anaerobic reactor was filled with packing material 50% of its total volume between the tube and the outer surface. The packing material used was randomly packed open-pore synthesis activated ceramic(SAC) media as support media for microbial attachment, growth, and chemical stability protected bacteria from effect of organic acid accumulation. In this research, although foodwaste has high concentrations C $l^{[-10]}$ and S $O_{4}$$^{2-}$ concentration the possibility of foodwaste anaerobic treatment was when foodwaste is treated by anaerobic digestion, this study focused on the possibility using C $H_4$ gas made under the anaerobic treatment as an alternative energy source. Other objective of this research is to study struvite formation and crystal forms in anaerobic digester. HAR is used to investigate phosphate crystallization without the addition of chemicals.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.4
• /
• pp.49-60
• /
• 2019

Recently the concentration of fine dust and ultra fine dust becomes so bad, which seriously threatens the health and even the life of people. So, government started to investigate several ways to reduce the amount of fine dust and ultra fine dust. From a few years ago it has been known that ships anchored at port emit a lot of pollution and seriously affect air quality of neighboring cities. To reduce the pollution emitted by ship AMP (Alternative Maritime Power Supply) has been proposed, which uses the electricity instead of bunker C oil or diesel. Many developed countries already installed AMP to improve air quality in port area. Korea is in the stage of planning to install AMP at port. However, there are many complicated problems to be handled before AMP installation. Due to huge initial cost and long period of construction ship owner and habour operating company are reluctant to AMP installation. And there are serious technological difficulties in constructing AMP in existing harbour. Lack of AMP core technology and operational difficulties of AMP are also big challenges to be conquered. In this study SWOT/AHP method is used to find strategic and efficient ways to handle above complicated challenges and then to vitalize the AMP installation.