• Journal of the Korean institute of surface engineering
• /
• v.32 no.3
• /
• pp.303-306
• /
• 1999

On the effect of substrate bias at first stage of diamond synthesis at lower substrate temperature(approximately 673K) using microwave plasma CVD and effect of reaction gas system for the bias enhanced nucleation were studied. The reaction gas was mixture of methane and hydrogen or carbon monoxide and hydrogen. The nucleation density of applied bias -150V using $CH_4-H_2$ reaction gas system, significantly higher than that of $C-H_2$ reaction gas system. When the $CH_4-H_2$ reaction was used, nucleation density was increased because of existence of SiC as a interface for diamond nucleation. By use of this negative bias effect for fabrication of CVD diamond film using two-step diamond growth without pre-treatment, fabrication of the diamond film consist of diamond grains $0.2\mu\textrm{m}$ in diameter was demonstrated

• Current Optics and Photonics
• /
• v.6 no.4
• /
• pp.400-406
• /
• 2022

We numerically demonstrate that the inherent spiking behavior in the quasi-continuous-wave (QCW) operation of an Nd:YAG laser can be suppressed by adopting bias pumping. After spiking suppression, the output QCW pulses from a bias-pumped Nd:YAG laser are very stable, and they can maintain nearly the same temporal shape as that of pump pulse under different pump repetition rates and peak powers. Our study implies that bias pumping is an alternative method of spiking suppression in solid-state lasers, and the application areas of an Nd:YAG laser may be extended by bias pumping.

• Asia Marketing Journal
• /
• v.26 no.1
• /
• pp.23-30
• /
• 2024

Firms often engage in manipulating online reviews as a promotional activity to influence consumers' evaluation on their products. With the prevalence of the promotional activities, consumers may notice and discount the reviews generated by the promotional activities. Discounting the firm-generating reviews may cause systematic measurement errors in the valence variable and lead to a negative bias when estimating the effect of consumers' organic reviews on demand. To correct the bias, this study proposes including product-specific bias-correction terms representing the proportion of extreme reviews in analysis. For illustration, the proposed method is applied to a demand model for data of movies released in South Korea. The results confirm a negative bias in the estimate of the valence sensitivity of demand. The negative bias potentially leads to an underestimation of the magnitude of the contagion effect through social interactions, a key component of evaluating the value of a satisfied consumer.

• The tire
• /
• s.88
• /
• pp.38-44
• /
• 1980

Bias Ply 타이어의 타이어 품질등급제 (UTQGS: Uniform Tire Quality Grading Standard)가 작년 4월 1일부로 발효되었다. 한편 Belted Bias 타이어의 UTQGS도 79년 10월1일 부터 발효되었으며, Radial타이어의 UTQGS는 80년 4월에 발효되었다.

• 한국방재학회:학술대회논문집
• /
• 2009.02b
• /
• pp.100.2-100.2
• /
• 2009

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.2
• /
• pp.239-244
• /
• 2017

We experimentally investigate the physical mechanism for asymmetrical degradation in amorphous indium-gallium-zinc oxide (a-IGZO) thin-film transistors (TFTs) under simultaneous gate and drain bias stresses. The transfer curves exhibit an asymmetrical negative shift after the application of gate-to-source ($V_{GS}$) and drain-to-source ($V_{DS}$) bias stresses of ($V_{GS}=24V$, $V_{DS}=15.9V$) and ($V_{GS}=22V$, $V_{DS}=20V$), but the asymmetrical degradation is more significant after the bias stress ($V_{GS}$, $V_{DS}$) of (22 V, 20 V) nevertheless the vertical electric field at the source is higher under the bias stress ($V_{GS}$, $V_{DS}$) of (24 V, 15.9 V) than (22 V, 20 V). By using the modified external load resistance method, we extract the source contact resistance ($R_S$) and the voltage drop at $R_S$ ($V_{S,\;drop}$) in the fabricated a-IGZO TFT under both bias stresses. A significantly higher RS and $V_{S,\;drop}$ are extracted under the bias stress ($V_{GS}$, $V_{DS}$) of (22 V, 20V) than (24 V, 15.9 V), which implies that the high horizontal electric field across the source contact due to the large voltage drop at the reverse biased Schottky junction is the dominant physical mechanism causing the asymmetrical degradation of a-IGZO TFTs under simultaneous gate and drain bias stresses.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.6
• /
• pp.3865-3869
• /
• 2013

Background: Cigarette per day (CPD) use is a key smoking behaviour indicator. It reflects smoking intensity which is directly proportional to the occurrence of tobacco induced cancers. Self reported CPD assessment in surveys may suffer from digit bias and under reporting. Estimates from such surveys could influence the policy decision for tobacco control efforts. In this context, this study aimed at identifying underlying factors of digit bias and its implications for Global Adult Tobacco Surveillance. Materials or Methods: Daily manufactured cigarette users CPD frequencies from Global Adult Tobacco Survey (GATS) - India data were analyzed. Adapted Whipple Index was estimated to assess digit bias and data quality of reported CPD frequency. Digit bias was quantified by considering reporting of '0' or '5' as the terminal digits in the CPD frequency. The factors influencing it were identified by bivariate and logistic regression analysis. Results: The mean and mode of CPD frequency was 6.7 and 10 respectively. Around 14.5%, 15.1% and 15.2% of daily smokers had reported their CPD frequency as 2, 5 and 10 respectively. Modified Whipple index was estimated to be 226.3 indicating poor data quality. Digit bias was observed in 38% of the daily smokers. Heavy smoking, urban residence, North, South, North- East region of India, less than primary, secondary or higher educated and fourth asset index quintile group were significantly associated with digit bias. Discussion: The present study highlighted poor quality of CPD frequency data in the GATS-India survey and need for its improvement. Modeling of digit preference and smoothing of the CPD frequency data is required to improve quality of data. Marketing of 10 cigarette sticks per pack may influence CPD frequency reporting, but this needs further examination. Exploring alternative methods to reduce digit bias in cross sectional surveys should be given priority.

• Journal of the Korean Vacuum Society
• /
• v.12 no.3
• /
• pp.174-181
• /
• 2003

Ta diffusion barriers have been deposited on Si (100) substrate by applying a negative substrate bias voltage. The effect of the substrate bias voltage on the properties of the Ta films was investigated. In the case of the Ta films deposited without the substrate bias voltage, a columnar structure and small grains were observed distinctly, and the electrical resistivity of the deposited Ta films was very high (250 $\mu\Omega$cm). By applying the substrate bias voltage, no clear columnar structure and grain boundary were observed. The resistivity of the Ta films decreased remarkably and at a bias voltage of -125 V, reaching a minimum value of 40 $\mu\Omega$cm, which is close to that of Ta bulk (13 $\mu\Omega$cm). The thermal stability of Cu(100 mm)/Ta(50 mm)/Si structures was evaluated after annealing in H2 atmosphere for 60 min at various temperatures. The Ta films deposited by applying the substrate bias voltage were found to be stable up to $600^{\circ}C$, while the Ta films deposited without the substrate bias voltage degraded at $400^{\circ}C$.

• Journal of the Korean institute of surface engineering
• /
• v.46 no.1
• /
• pp.29-35
• /
• 2013

The effect of DC bias on the growth of nanocrystalline diamond films on silicon substrate by microwave plasma chemical vapor deposition has been studied varying the substrate temperature (400, 500, 600, and $700^{\circ}C$), deposition time (0.5, 1, and 2h), and bias voltage (-50, -100, -150, and -200 V) at the microwave power of 1.2 kW, working pressure of 110 torr, and gas ratio of Ar/1%$CH_4$. In the case of low negative bias voltages (-50 and -100 V), the diamond particles were observed to grow to thin film slower than the case without bias. Applying the moderate DC bias is believed to induce the bombardment of energetic carbon and argon ions on the substrate to result in etching the surfaces of growing diamond particles or film. In the case of higher negative voltages (-150 and -200 V), the growth rate of diamond film increased with the increasing DC bias. Applying the higher DC bias increased the number of nucleation sites, and, subsequently, enhanced the film growth rate. Under the -150 V bias, the height (h) of diamond films exhibited an $h=k{\sqrt{t}}$ relationship with deposition time (t), where the growth rate constant (k) showed an Arrhenius relationship with the activation energy of 7.19 kcal/mol. The rate determining step is believed to be the surface diffusion of activated carbon species, but the more subtle theoretical treatment is required for the more precise interpretation.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.395-400
• /
• 2006

Among the various error sources in positioning and navigation, the paper focuses on the modeling and prediction of receiver clock bias and then tries to achieve positioning based on simulated and predicted clock bias. With the SA off, it is possible to model receiver clock bias more accurately. We selected several types of GNSS receivers for test using ARMA model. To facilitate prediction with short and limited sample pseudorange observations, AR and ARMA are compared, and the improved AR model is presented to model and predict receiver clock bias based on previous solutions. Our work extends to clock bias prediction and positioning based on predicted clock bias using only 3 satellites that is usually the case under urban canyon situation. In contrast to previous experiences, we find that a receiver clock bias can be well modeled using adopted ARMA model. Test has been done on various types of GNSS receivers to show the validation of developed model. To further develop this work, we compare solution conditions in terms of DOP values when point positioning is conducted using 3 satellites to simulate urban positioning environment. When condition allows, height component is derived from other ways and can be set as known values. Given this condition, location is possible using less than 2 GNSS satellites with fixed height. Solution condition is also discussed for this background using mode of constrained positioning. We finally suggest an effective predictive time span based on our test exploration under varied conditions.