• Journal of the Korean Ceramic Society
• /
• v.30 no.12
• /
• pp.1015-1022
• /
• 1993

The formation process of polycrystalline YIG(Y3Fe5O12) prepared by conventional method in Fe2O3-Y2O3 system was investigated. Effect of the microstructure of sintered body on electromagnetic properties was also investigated. Orthoferrite (YFeO3) was formed between 900 and 110$0^{\circ}C$. Formation of YIG phase begin at 110$0^{\circ}C$ with sharp increased saturation magnetization simultaneously. YIG phase is identified as single phase above 120$0^{\circ}C$. The microstructures and electromagnetic properties of sintered bodies are varied due to calcination condition of starting materials. The sintered YIG of calcined sample at 110$0^{\circ}C$ has such magnetic properties as Bs=1580G, BHC=1.89Oe, Tc=570K, ΔH(9.3GHz)=78Oe.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.680-683
• /
• 2001

본 논문은 대기에 의한 흡수율이 매우 큰 60GHz 대역에서의 전파 특성을 이용하여 근거리 차량간 통신 시스템에 적용하여 시스템을 분석한다. 근거리 차량간 통신에서는 전파환경이 직접파와 지면반사파 그리고 측면 차량, 도로벽면에 의한 다중경로가 존재하는 라이시안 분포의 특성이 존재하며 이러한 특성을 고려하여 밀리미터파 분석에 효율적인 Raytracing방법을 도입하여 차량간 통신 시스템을 분석한다. 또한 차량간 통신은 운전자의 안전성과 연결되어지기 때문에 매우 높은 신뢰성이 요구되어지며 따라서 MC-CDMA/QPSK 방식을 도입하여 시스템의 신뢰성을 확보하였으며 수신 성능 향상을 위한 개선기법으로는 BCH 부호화 기법을 적용하여 시스템의 성능을 비교 분석 한다.

• Journal of Sericultural and Entomological Science
• /
• v.2
• /
• pp.49-61
• /
• 1962

The insect Diplosis mori Yokoyama is causing extensive destruction of mulberry trees in Korea with a resultant loss in silk production. This study was made to determine an effective method of control. Methods and Materials Used Preliminary studies were made to determine more exactly the life cycle of the insect. Based on this information, various control measures were tested, including the use of spray methods with BHC and control of larvae by tilling. Results Obtained 1. Life cycle studies (a) In the Suwon area, this-insect has 5 generations per year. The first starts in the later part of June and the final cycle ends in the later part of September. (b) The adult insects appear about 7: 00-8: 00 P.M. and live for 2-5 days. Females live in longer periods than the male. (c) Larvae lives inside the second and third stipules (A. B.) before mulberry leaf development. They cause extensive damage to the leaves at the point where they are attached to the stem. (d) Weather conditions considerably affect the life cycle. The pupa particularly are affected and not be able to change into the moth stage when there is a long period of no rain. (e) Larvae are large......0.3 to 2.0mm......and are milky-white immediately after hatching but turn to pinkish as the worm matures. The matured worm has a jumping ability up to 15-20cm. The worm burrows into the ground 1.5 to 3.0 cm before changing into the pupal stage. (f) The pupal stage usually lasts 7-8 days, in summer weather conditions and the pupa is surrounded with a coarse cocoon. (g) These insects, as a general rule, overwinter as pupae but sometimes as larvae. 2. Control measures (a) BHC dust applied on the ground seem most effective. It should be done 4-5 days after the worm has burrowed into the ground. For this control, it is recommended that 6kg of a 2% formation Tanbo(l0ares) be used. (b) For the effective spraying against the fly, it is recommended that a formulation of liquid BHC spray terials be used at the rate of 400-600 liters per Tanbo. (c) Tillage methods which provide a cover of soil 5cm or more in depth above infested areas will effect-maively prevent the emergence of the fly from the pupal stage. 3. Conclusions Methods of control against Diplosis mori Yokoyama can be tied more closely to the life cycle of the insect with more effective results. Further studies are needed to complete information on possible controls during or after hibernation. Economic studies on the cost of these control measures are also needed.

• Korean Journal of Environmental Agriculture
• /
• v.8 no.1
• /
• pp.7-16
• /
• 1989

Application of steam distillation on the analysis of pesticide residue in soil, water and crops was studied using the nitrogen distillation apparatus. Most pesticides which were extracted by organic solvents could be analyzed by the steam distillation method. For instance, distillations of PCNB, ${\gamma}-BHC$, ${\alpha}-or$ ${\beta}-endosulfan$, IBP, diazinon, fenthion, fenitrothion, alachlor, butachlor, pretilachlor, metolachlor, pendimethalin, benthiocarb and molinate were possible, but not simazine, atrazine and nitrofen. The optimum volume of distillate for a sufficient extraction of pesticide varied according to kind of pesticide. In general, the volume needed was little for carbamate, but much more for organochlorine. When the definite amount of distillate was obtained and then the condenser was washed by acetone, the optimum volume of distillate was less. Using the steam distillation method, the amount of organic solvent needed for one extraction of pesticide from soil, water and vegetable was less than the conventional solvent extraction method, and the analytical procedure became simpler. The process of concentration and clean up was mostly unnecessary, although a ghost peak was apparent in the gas chromatogram according to the kind of materials distilled.

• Korean Journal of Environmental Agriculture
• /
• v.2 no.2
• /
• pp.83-89
• /
• 1983

To obtain basic information for the safe use of pesticides, the aquatic environment of 5 major rivers was surveyed in April and August 1982 for organochlorine and organophosphorus pesticide residues. Regardless of sampling times and sites, pesticide residue levels were very low. Of the organophosphorus pesticides surveyed, only IBP and diazinon were detected in water samples while fenthion, fenitrothion, chlorpyriphos, chlorpyriphos-methyl, chlorfenvinphos, phenthoate, and edifenphos were not detected in any water samples. Residue levels and detection frequencies of IBP or diazinon were much higher in water samples collected in August than those collected in April. Detection frequencies of organochlorine pesticides, on the other hand, were high, but their actual residue levels were very low. BHC was detected nearly in all water samples while aldrin was not found in any samples. Detection frequencies of heptachlor, endosulfan, and o.p`-DDT were considerably high but dieldrin and p.p`-DDT were detected in a few water samples and their residue levels were also very low.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.15 no.3
• /
• pp.207-212
• /
• 1986

Heavy metal contents and residues level of organochlorine pesticides were analyzed for commercial salted and fermented sea-food which bought from pusan area. Heavy metal contents ranged from 0.11 to 0.46 ppm of mercury, trace to 1.1 ppm of lead, 0.01 to 0.34 ppm of cadmium, 0.4 to 5.98 ppm of cupper, 0.16 to 4.5 ppm of zinc, trace to 0.49 ppm of manganese and trace to 1.35 ppm of arsenic. Residue level of organochlorine pesticides in salted and fermented sea-foods ranged from 0.3 ppb to 1.825 ppb of total BHC Organochlorine pesticides of DDE, dieldrine, pp'-DDD and pp'-DDT were detected a small amount from Ge jeot and Myeol-Chi jeot. In conclusion. the heavy metal and levels of organochlorine pesticides residues were safety to eat the salted and fermented sea foods.

• Journal of the Korean Chemical Society
• /
• v.39 no.12
• /
• pp.902-909
• /
• 1995

Detection limit as well as calibration curves on organophosphorus pesticide(dimethoate, diazinon, parathion-methyl, fenitrothion, malathion) and BHCs were measured for evaluation of utility on qualitative or quantitative analysis of pesticides with ion Trap mass spectrometer and quadrupole mass spectrometer. As ionization source, EI and CI were adopted for qualitative analysis of pesticides by comparison of each fragmentation pattern. At the same time, the utility as trace analysis techniques through scan or selected ion monitoring(SIM) mode was evaluated. With ion trap for all pesticides, detection limit(DL, 1 ${\mu}L$ injection) on scan mode was ranged 0.008∼0.225 ng at signal to noise ratio 3. With quadrupole DL on scan mode was ranged 0.23∼3.1 ng over 0.032∼0.68 ng on SIM mode. The calibration curve with ion trap generated good linearity over 0.99 as correlation coefficient. As clean up procedure, Bio Beads S-X3 was used for the separation of oils from five organophosphorous pesticides in flour extractant showing more than 80% as recovery at most cases. In case of BHCs in jinseng with Florisil column, the recovery of pesticides has been 60% to 90%.

• Food Science and Preservation
• /
• v.7 no.4
• /
• pp.395-402
• /
• 2000

To enlarge application field of electrolyzed acid-water(EAW) on food industry, the changes of EAW properties by storage conditions and heating were investigatet. It was showed that storing EAW in closed container is mon effective to keep up the oxidation-reduction potentials(ORP), hyperchloride content and pH than stored in opened ones. ORP of EAW stored in closed container could be kept mon than 1 month as 1,150 mV levels. Ruing heating from 2$0^{\circ}C$ to 95$^{\circ}C$, ORP was increased to 1,150 mV levels at 95$^{\circ}C$ after gradual decrease to 5$0^{\circ}C$. Tyrosinase activity was decreased approximately to 26%~35% in EAW having a 950 mV~1,140 mV ORP. Also it was confirmed that EAW has anti-browning effect as sliced apple and potato, and their juices treated with EAW had conspicous difference in their $\Delta$E value. 12 kinds of pesticides such as aldrine, capful diazinon, diedrin, $\alpha$-endosulfan $\beta$-endosulfan, endosulfan sulfate, endrin, $\alpha$-BHC, o,p'-DDT, procymidone, PCNB added in EAW were recovered from ND~73.6% comparing to ones added in distilled water. The recovered amounts of pesticides, procymidone and diazinon in lettuce after soaking in EAW were 1.12 ppm and ND, compared with those of amounts soaked in distilled water were 3.67 ppm and 3.05 ppm respectively. So, it seems that EAW has potentials to promote the degradation of pesticides.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.4
• /
• pp.51-58
• /
• 2000

It is well known that the majority of the emissions measured from vehicle exhaust in the US Federal Test Procedure(FTP-75) are emitted during the first 60 seconds. This paper describes an experimental study on SI engine emissions reduction after cold start with interval secondary air injection and coolant control. Secondary air injection after cold start to reduce exhaust emissions causes an exothermic reaction at the exhaust port and gives sufficient air to the catalyst. For that reason engine-out emissions oxidized in the exhaust port and the rapid heating of a catalytic converter after cold start with CSAI and ISAI are estimated. The influence of the coolant temperature on SI engine emissions has been estimated. In the present studycoolant control of the cylinder head tempeature is used to investigate the effect of coolant temperature on SI engine emissions. The results show that engine-out hydrocarbon and carbon monoxide emissions are considerably reduced with interval secondary air injection and coolant control.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.2
• /
• pp.251-258
• /
• 2011

The existing evaluation systems based on financial performance summarize the information about past results and focus on short-term performance, and so they have the limits to explain the future value of firms and to make a long-term strategic performance. By this reason, as a way to increase the future value, the development of the integrated performance evaluation system with which we may manages financial performance and knowledge assets together has been required recently. This study puts together various researches for the evaluation of knowledge assets, and analyzes the existing studies for the domestic medical devices industry and the tendency of introduction for business practice. Under this analysis, this study develops the knowledge asset evaluation indexes for medical devices industry by using the Balanced Score Card (BSC) of Kaplan & Norton(1992), and then presents the evaluation model by applying the Analytic Hierarchy Process (AHP) of Saaty(1980) to get the weight for each index. With the final evaluation model, we can calculate the evaluation score combined with both the quantitative indexes and the qualitative indexes at once.