• 한국응용과학기술학회지
• /
• 제30권1호
• /
• pp.88-95
• /
• 2013

본 연구는 1차 아민(MEA, monoethanolamine)으로 개질한 입자상 활성탄(WSC-470)을 이용하여 실내 저농도 이산화탄소를 제거하고자 하였다. MEA 함침농도(6.1~42.7 wt.%)와 용매제(distillate water, ethanol, methanol) 종류에 따라 제조된 흡착제의 특성분석(BET, pore property, XPS)과 각 흡착제의 $CO_2$가스에 대한 최대 흡착능, 3000 ppm의 저농도 $CO_2$분위기에서의 흡착량을 측정하였다. MEA 농도가 증가할수록 물리적 특성인 비표면적, 공극률, 미세기공률 등은 감소한 반면, 표면 염기도 향상에 기여하는 질소 함량은 증가하였다. 이러한 물성변화로 인해 최대 흡착능은 초기 활성탄(RAC: 3.27 mmol/g) 대비 최대 71%(AC-MM(42.7, 40): 0.937 mmol/g)가 감소한 반면, 저농도 이산화탄소에 대한 선택적 흡착량은 45%(AC-MM(15.3, 40): 0.73 mmol/g)의 향상을 보였다.

• 한국분말재료학회지
• /
• 제13권6호
• /
• pp.396-400
• /
• 2006

The Ti-Ni alloy nanopowders were synthesized by a levitational gas condensation (LGC) by using a micron powder feeding system and their particulate properties were investigated by x-ray diffraction (XRD), transmission electron microscopy (TEM) and Brunauer-Emmett-Teller (BET) method. The starting Ti and Ni micron powders $150{\mu}m$ were incorporated into the micron powder feeding system. An ingot type of the Ti-Ni ahoy was used as a seed material for the levitation and evaporation reactions. The collected powders were finally passivated by oxidation. The x-ray diffraction experiments have shown that the synthesized powders were completely alloyed with Ti and Ni and comprised of two different cubic and monoclinic crystalline phases. The TEM results showed that the produced powders were very fine and uniform with a spherical particle size of 18 to 32nm. The typical thickness of a passivated oxide layer on the particle surface was about 2 to 3 nm. The specific surface area of the Ti-Ni alloy nanopowders was $60m^2/g$ based on BET method.

• The Korean Journal of Ceramics
• /
• 제3권2호
• /
• pp.116-123
• /
• 1997

A chemically stabilized $\beta$-cristobalite, which is stabilized by stuffing cations of $Ca^{2+}$ and $Al^{3+}$, was prepared by a solution-polymerization route employing Pechini resin or PVA solution as a polymeric carrier. The polymeric carrier affected the crystallization temperature, morphology of calicined powder, and particle size distribution. In case of the polyvinyl alcohol (PVA) solution process, a fine $\beta$-cristobalite powder with a narrow particle size distribution (average particle size : 0.3$\mu\textrm{m}$) and a BET specific surface area of 72 $\m^2$/g was prepared by an attrition-milling for 1 h after calcination at 110$0^{\circ}C$ for 1h. Wider particle size distribution and higher specific surface area were observed for the $\beta$-cristobalite powder derived from Pechini resin. The cubie(P1-to-tetraganalb) phase transformation in polynystalline $\beta$-cristobalite was induced at approximately 18$0^{\circ}C$. Like other materials showing transformation toughening, a critical size effect controlled the $\beta$-to-$\alpha$ transformation. Densifed cristobalite sample had some cracks in its internal texture after annealing. The cracks, occurred spontaneoulsy on cooling, were observed in the sample with an average grain sizes of 4.0 $\mu\textrm{m}$ or above. In case of the sintered cristobalite having a composition of CaO.$2Al_2O_3$.40SiO$_2$, small amount of amorphous phase and slow grain growth during annealing were observed. Shear stress-induced transformation was also observed in ground specimen. Cristobalite having a composition of CaO.2Al2O3.80SiO2 showed a more sensitive response to shear stress than the CaO.$2Al_2O_3$.40SiO$_2$ type cristobalite. Shear-induced transformation resulted in an increase of volume about 13% in $\alpha$-cristobalite phase on annealing for above 10 h in the case of the former composition.

• 한국분말재료학회지
• /
• 제18권2호
• /
• pp.122-128
• /
• 2011

This study investigated the high temperature oxidation behavior of Ni-22.4%Fe-22%Cr-6%Al (wt.%) porous metal. Two types of open porous metals with different pore sizes of 30 PPI and 40 PPI (pore per inch) were used. A 24-hour TGA test was conducted at three different temperatures of $900^{\circ}C$, $1000^{\circ}C$ and $1100^{\circ}C$. The results of the BET analysis revealed that the specific surface area increased as the pore size decreased from 30 PPI to 40 PPI. The oxidation resistance of porous metal decreased with decreasing pore size. As the temperature increased, the oxidation weight gain of the porous metal also increased. Porous metals mainly created oxides such as $Al_2O_3$, $Cr_2O_3$, $NiAl_2O_4$, and $NiCr_2O_4$. In the 40 PPI porous metal with small pore size and larger specific surface area, the depletion of stabilizing elements such as Al and Cr occurred more quickly during oxidation compared to the 30 PPI porous metal. Ni-Fe-Cr-Al porous metal's high-temperature oxidation micro-mechanism was also discussed.

• 한국연초학회지
• /
• 제27권2호
• /
• pp.171-177
• /
• 2005

Coconut based activated carbon and silica-gels were impregnated with 3-aminopropyltri ethoxysilan(APS) and N-(2-aminoethyl)-3-aminopropyl triethoxysilane (AEAPS) in order to investigate the effect of the amine group and the pore size of the supports on the removal of hydrogen cyanide(HCN) and aldehydes in mainstream smoke(MS). The physicochemical properties of the supports were analyzed by using thermal gravity analyzer(TGA), $N_2$ adsorption and desorption isotherms$(BET,\;N_2)$, and SEM-EDS. According to our experimental data, there was no significant difference in the delivery amount of HCN and aldehydes of non-functionalized silica-gels having meso-pores bigger than $20\AA$. In the case of silica-gels functionalized with APS(APS silica-gel), the delivery amounts of hydrogen cyanide(HCN) and aldehydes decreased with the increase of APS concentration. Silica-gel functionalized with AEAPS(AEAPS silica-gel) showed higher removal efficiency than that of APS silica-gels. The delivery amounts of HCN and aldehydes of activated carbon impregnated with APS and AEAPS increased with the increase of the APS and AEAPS concentrations. In accordance with the specific surface area analysis results, APS and AEAPS molecules decreased the specific surface area by blocking the micro-pores of the activated carbon. The volatile organic components removal efficiency by the micro-pores was higher than that of the amine group impregnated into the activated carbon.

• 대한화학회지
• /
• 제61권6호
• /
• pp.339-345
• /
• 2017

자동차 폐타이어 분말(WTP)을 질소분위기 하에서 2시간 동안 $400^{\circ}C$의 온도에서 열처리하여 탄소질 흡착제(CA-WTP)로 만들고, 이들에 대한 열 중량 분석, 에너지 변환 X-선 분석, 주사전자 현미경, 비표면적 측정, 적외선 분광기들을 통해 특성을 파악한 후, 수중의 Cd의 제거를 위한 흡착제로서 시험하였다. 열처리한 CA-WTP는 WTP보다도 매우 높은 비표면적과 총 세공부피 그리고 Cd에 대해 높은 흡착효율을 나타내었다. 흡착의 평형 데이터는 Freundlich와 Langmuir 흡착 등온선 모델을 이용하여 평가하였고, 위 두 흡착 등온선 모두 0.95보다 큰 상관계수($R^2$) 값을 나타내었다. 연구의 결과는 열처리 한 폐타이어 분말(CA-WTP)이 수중으로부터 Cd을 흡착하는데 효율적인 흡착제로 사용될 수 있다는 것을 보였다.

• Environmental Engineering Research
• /
• 제19권3호
• /
• pp.289-292
• /
• 2014

The effect of carbon dioxide ($CO_2$) on global warming is serious problem. The adsorption with solid sorbents is one of the most appropriate options. In this study, the most interesting adsorbent is granular activated carbon (GAC). It is suitable material for $CO_2$ adsorption because of its simple availability, many specific surface area, and low-cost material. Afterwards, GAC was impregnated with chitosan solution as impregnated granular activated carbon (CGAC) in order to improve the adsorption capacity of GAC. This research aims to compare the physical and chemical characteristics of GAC and CGAC. The experiment was carried out to evaluate the efficiency of $CO_2$ adsorption between GAC and CGAC. The results indicated that the iodine number of GAC and CGAC was 137.17 and 120.30 mg/g, respectively. The Brunauer-Emmett-Teller results (BET) of both GAC and CGAC show that specific surface area was 301.9 and $531.3m^2/g$, respectively; total pore volume was 0.16 and $0.29cm^3/g$, respectively; and mean diameter of pore was 2.18 and 2.15 nm, respectively. Finally, the $CO_2$ adsorption results of both GAC and CGAC in single column how the maximum adsorption capacity was 0.17 and 0.25 mol/kg, respectively; how degeneration time was 49.6 and 80.0 min, respectively; and how the highest efficiency of $CO_2$ adsorption was 91.92% and 91.19%, respectively.

• 유기물자원화
• /
• 제25권3호
• /
• pp.63-71
• /
• 2017

본 연구에서는 활성탄 제조에 널리 이용되고 있는 KOH 활성화법으로 활성화된 활성탄의 표면적 증가를 위하여 세척시간, 교반속도, 세척횟수 등의 변수들에 대한 활성탄 세척공정 최적화 연구를 수행하였다. 연구결과, 활성탄의 표면적은 세척효율이 증가됨에 따라 뚜렷하게 증가되었는데, 90% 이상의 세척효율을 얻기 위해서는 활성탄의 복잡한 세공구조에 따른 세공 내 확산메커니즘이 제어인자로 작용함을 알 수 있었다. 또한, 세척액의 증발을 통하여 $K_2CO_3$를 얻을 수 있었고 이를 이용한 활성화실험이 이루어졌다. 그 결과, 비표면적 $2,219m^2/g$의 제조가 가능하였다. $K_2CO_3$가 KOH의 효과적인 대안이라는 것을 고려할 때, 활성탄 제조공정에서 폐수 재이용은 무배출 폐기물 공정에 적용 할 수 있음을 보여주었다.

• Bulletin of the Korean Chemical Society
• /
• 제30권9호
• /
• pp.1967-1972
• /
• 2009

The electrospinnability of pitch was improved by blending in a solution of polyacrylonitrile (PAN) resulting in the reduction of the average fiber diameter from 2000 to 750 nm. Activated carbon fibers (ACFs) derived by stabilization, carbonization and steam activation at 700, 800, and 900 ${^{\circ}C}$ of the PAN/pitch electrospun fibers for 60 min were investigated as electrodes for supercapacitors. The Brunauer, Emmett, Teller (BET) specific surface area ranged from 732 to 1877 $m^2g^{-1}$ and the specific capacitance from 75.5 to 143.5 $Fg^{-1}$, depending on the activation conditions. Electrodes from the electrospun web activated at 900 ${^{\circ}C}$ exhibited a particularly quick response showing a high frequency of 5.5 Hz at a phase angle of ‒$45^o$ of the impedance spectroscopy.

• Carbon letters
• /
• 제23권
• /
• pp.9-16
• /
• 2017

This paper introduces a nitrogen-doped ordered mesoporous carbon (NOMC) derived from glucosamine with hybrid capacitive behaviors, achieved by successfully combining electrical double-layer capacitance with pseudo-capacitance behaviors. The nitrogen doping content of the fabricated NOMC reached 7.4 at% while its specific surface area ($S_{BET}$) and total pore volume reached $778m^2g^{-1}$ and $1.17cm^3g^{-1}$, respectively. A dual mesoporous structure with small mesopores centered at 3.6 nm and large mesopores centered at 9.9 nm was observed. The specific capacitance of the reported materials reached up to $328Fg^{-1}$, which was 2.1 times higher than that of pristine CMK-3. The capacitance retention rate was found to be higher than 87.9% after 1000 charge/discharge cycles. The supplementary pseudocapacitance as well as the enhanced wettability and conductivity due to the incorporation of nitrogen heteroatoms within the carbon matrixes were found to be responsible for the excellent capacitive performance of the reported NOMC materials.