• 한국광물학회지
• /
• 제15권3호
• /
• pp.195-204
• /
• 2002

광물조성과 노출표면적(exposed surface area)은 토양풍화속도 계산모델에 영향을 미치는 중요한 요인들이다. PROFILE 등 기존의 풍화속도 계산모델에서는 입도분석자료에 기초한 기하학적 계산값이나 $N_2$-BET 비표면적 등을 그대로 노출표면적으로 적용하고 있다. 그러나, 토양은 광물과 유기물의 혼합체로써 노출표면적을 정확히 구하기는 상당히 어려운 것이 사실이다. 본 연구에서는 유기물의 영향에 의한 토양광물의 노출표면적변화를 토양 깊이에 따른 peroxidation 전후의 N2-BET 비표면적값을 통해 살펴보고, 토양칼럼실험을 이용하여 풍화속도의 차이를 살펴보았다. 실험결과 peroxidation 후의 $N_2$-BET 비표면적은 1.68~4.87 $m^2$/g의 범위에서 증가하였으며, 깊이에 따라 증가하는 범위가 감소하는 경향을 보여주었다 이는 부식산 등 토양표면에 농집되어 존재하는 다양한 형태의 유기산 등이 광물의 노출표면적을 감소시키고 있다는 것을 의미한다고 할 수 있다 기존의 토양풍화속도 모델에서 토양광물 노출표면적변화 계산에 있어서 광물-유기산간의 결합에 의한 영향을 결합세기 측면에서 고려하고 정량화 하는 것이 향후과제라고 생각된다.

• 한국연초학회지
• /
• 제16권2호
• /
• pp.191-197
• /
• 1994

Relationships between surface structure and adsorption properties of smoke components were investigated in surface-modified and un-modified activated carbon filter cigarettes. Commercially available activated carbon was treated with nitric acid and hydrogen peroxide as oxidant, and their pore volume, surface structure, BET surface area, pore type and size were studied. BET surface area and pore volume were decreased by nitric acid treatment, but median pore diameter was 8.1 $\AA$, which showed better development of pore compared with that of un-modified activated carbon, 6.9 $\AA$. In case of hydrogen peroxide treatment, BET surface area and pore volume were increased. Their pore was found to be a slit type based on V-t plot analysis. Neutralization capacities for bases of different strength (NaHCO3, Na2CO3, NaOEt and NaOH) showed that the majority of the acidic surface groups are of weak acidity. Modification of the activated carbon surface led to a slight change in adsorption properties when analyzing the smoke of triple-filter cigarette with surface-modified activated carbon.

• Elastomers and Composites
• /
• 제51권2호
• /
• pp.128-137
• /
• 2016

The effect of the surface area of silicas on their reinforcing performance to styrene-butadiene rubber (SBR) compounds was systematically investigated. The feasibility of the Brunauer-Emmett-Teller surface area ($S_{BET}$) as a parameter representing the characteristics of the silicas was discussed compared to the mesopore volume, c value, oil absorption, and uptake of silane. The increase in $S_{BET}$ of silicas caused a considerable increase in Mooney viscosity, minimum torque, and hysteresis loss of the silica-filled SBR compounds, while significantly enhancing their abrasion property. These changes were explained by the attrition between the hydrophilic silica surface and the hydrophobic rubber chains. As expected, the change in $S_{BET}$ did not induce any remarkable changes in the cure, processing, tensile, and dynamic properties of the silica-filled SBR compounds because the crosslinking density of the rubber chains mainly determined these properties.

• Bulletin of the Korean Chemical Society
• /
• 제34권2호
• /
• pp.569-573
• /
• 2013

In this study, activated carbon fabric was prepared from a cellulose-based polymer (viscose rayon) via a combination of physical and chemical activation (mixed activation) processes by means of $CO_2$ as a gasifying agent and surface and adsorption properties were evaluated. Experiments were performed to investigate the consequence of activation temperature (750, 800, 850 and $925^{\circ}C$), activation time (15, 30, 45 and 60 minutes) and $CO_2$ flow rate (100, 200, 300 and 400 mL/min) on the surface and adsorption properties of ACF. The nitrogen adsorption isotherm at 77 K was measured and used for the determination of surface area, total pore volume, micropore volume, mesopore volume and pore size distribution using BET, t-plot, DR, BJH and DFT methods, respectively. It was observed that BET surface area and TPV increase with rising activation temperature and time due to the formation of new pores and the alteration of micropores into mesopores. It was also found that activation temperature dominantly affects the surface properties of ACF. The adsorption of iodine and $CCl_4$ onto ACF was investigated and both were found to correlate with surface area.

• 분석과학
• /
• 제24권6호
• /
• pp.503-509
• /
• 2011

비표면적은 기능성 나노소재의 특성평가에 있어 매우 중요한 지표가 되고 있다. 하지만 비표면적 측정은 측정방법 및 해석 방법에 따라 결과에 많은 차이가 있어왔다. 국내에 보급된 비표면적 측정장치의 신뢰성 검증을 위하여, 21개 산학연 기관을 대상으로 순회평가(RRT)를 수행하였다. 순회평가 분석 결과 많은 기관에서는 비표면적 측정장비의 흡착량 측정 성능에 문제가 있음을 확인 하였으며, 이는 인증기준물질의 필요성을 확인시켜 주었다. 또한 BET 분석방법이 분석자의 주관에 의해 많이 좌우됨을 확인 하였다. 즉 BET 분석구간의 선택영역에 따라 CRM I의 경우 16% 까지 차이를 줄 수 있음을 확인하였는데, 이는 적정한 BET 구간의 선택을 위한 BET 매개변수 C 값과 fitting 상관계수 R 값에 대한 기준이 필요함을 확인시켜 주었다. 이러한 순회평가의 경험과 검증된 비표면적 인증물질 및 표준 절차서의 보급은 산업계에 신뢰성 있는 비표면적 측정결과를 주게 됨으로서, 일관성 있는 공정운용에 의한 품질관리, 생산성 향상, 안정성 판단 및 신제품 개발 등에 기여할 것이다.

• 한국결정성장학회지
• /
• 제19권3호
• /
• pp.125-129
• /
• 2009

The preparation and characterization of niobium carbide crystallites were investigated in this study, and in particular, the effect of preparation conditions were studied on the synthesis of niobium carbides crystallites. For this purpose, various characterization techniques including x-ray diffraction, BET surface area, and oxygen uptake measurements were employed to characterize the synthesized niobium carbide crystallites. The niobium carbide crystallites were prepared using niobium oxide and methane gas or methane-hydrogen mixture. Using x-ray diffraction a lattice parameter of $4.45{\AA}$ and a crystallite size ranging from $52{\AA}$ to $580{\AA}$ was found. BET surface areas ranged from $3.2\;m^2/g$ to $16.6\;m^2/g$ and oxygen uptake values varied from $0.5{\mu}mol/g$ to $6.1{\mu}mol/g$. It was observed that niobium carbide crystallites were active for ammonia decomposition reaction. While the BET surface area increased with increasing the oxygen uptake, the conversion of ammonia decomposition reaction decreased. These results indicated that the ammonia decomposition over these materials was considered to be structure-sensitive.

• 한국응용과학기술학회지
• /
• 제23권3호
• /
• pp.199-206
• /
• 2006

Direct decomposition of methane over three types of carbon black (N330-p, N330-f, and HI-900L) was carried out in a fluidized bed quartz reactor. Properties of carbon black before and after reaction were measured and found to be related with surface structure and weight gain. For N330-p and N330-f, some carbon deposit on the surface was considered to be the reason for the increase of BET surface area and pore volume with weight gain. Carbon deposits on the surface and the conglutination of some aggregates may explain the slight increase of particle size. Properties of HI-900L changed much more significantly with weight gain. It is supposed that the increase of aggregate size of HI-900L were due to some unknown oily components. The corresponding agglomeration might be the reason for the decrease of BET surface area with weight gain, as compared with the increase of that for the case of N330 black.

• 대한화학회지
• /
• 제42권6호
• /
• pp.696-702
• /
• 1998

황피독에 저항성을 가지는 수성가스 전환반응용 CoMo 계열 촉매에 알칼리금속염 첨가가 반응활성에 미치는 영향에 대하여 연구하였다. 알칼리금속염의 음이온과 양이온의 각각에 대한 영향을 알아보기 위하여 크게 두 경우로 나누어 촉매를 제조하였다. 그 하나는, 양이온을 K로 고정시키고 음이온을 변형시킨 경우로서, 반응활성의 변화는 BET 표면적의 변화로 설명되었다. 다른 한 경우는, 음이온을 $NO_3^-$로 고정시키고 알칼리금속 이온을 변형시킨 경우로서, Li가 첨가된 촉매의 활성이 가장 뛰어났으며 다른 양이온의 경우에는 서로 비슷한 낮은 활성을 보였다. 알칼리금속의 첨가량의 변화에 따른 BET 표면적의 변화와 반응활성의 변화가 같은 경향을 보였다. 알칼리금속염의 양이온을 변화시킨 경우에는 BET 표면적과 정8면체 배위구조 속의 $Mo^{6+}$에 대한 정4면체 배위구조 속의 $Mo^{6+}$의 비, 즉 $Mo^6+[T]/Mo^{6+}[O]$ 값의 복합적인 관계를 통해 반응활성의 변화를 설명할 수 있었다.

• Nuclear Engineering and Technology
• /
• 제46권1호
• /
• pp.117-124
• /
• 2014

The effect of various process variables on the powder properties of recycled $U_3O_8$ from MnO-$Al_2O_3$ doped large grain $UO_2$ pellets and the effect of those recycled $U_3O_8$ powders on the sintered density and grain size of MnO-$Al_2O_3$ doped large grain $UO_2$ pellets have been investigated. The evolution of morphology, size, and BET surface area of the recycled $U_3O_8$ powders according to the respective variation of the thermo-mechanical treatment variables of oxidation temperature, powder milling, and sequential cyclic heat treatment of oxidation and then reduction was examined. The correlation between the BET surface area of recycled $U_3O_8$ powder and the sintered pellet properties of MnO-$Al_2O_3$ doped pellets showed that the pellet density and grain size of doped pellets were increased and then saturated by increasing the BET surface area of the recycled $U_3O_8$ powder. The density and grain size of the pellets were maximized when the BET surface area of the recycled $U_3O_8$ powder was in the vicinity of $3m^2/g$. Among the process variables applied in this study, the cyclic heat treatment followed by low temperature oxidation was a potential process combination to obtain the sinter-active $U_3O_8$ powder.

• 한국세라믹학회지
• /
• 제46권6호
• /
• pp.568-573
• /
• 2009

In this study, we used coal based activated carbons as starting material and phenolic resin (PR) as a bonding agent to prepare spherical shaped activated carbons. The textural properties of SAC were characterized by BET surface area, XRD, SEM, iodine adsorption, strength intensity and pressure drop. According to the results, the spherical activated carbon prepared with activated carbon and PR at a ratio of 60:40 was found to have the best formation of spherical shape, which was found in sample SAC40. After activation, SAC40 has high BET surface area, iodine adsorption capability and strength value, and lowest pressure drop.