• Journal of Apiculture
• /
• v.33 no.4
• /
• pp.239-250
• /
• 2018

We investigated the pollination activity of honeybees (Apis mellifera L.) in terms of different climatic conditions in the greenhouse cultivation of watermelons (Citrullus lanatus L.) during winter. The aim of the study was to search a climatic condition which effectively can be use honeybees as pollinators during the flowering season of watermelons in winter or early spring. The average climatic conditions inside the greenhouse during the bee activity time (BAT)-between 10:00 and 16:00 in mid-Februarywere a temperature of $30.4^{\circ}C$, relative humidity of 53.7%, illuminance level of 22,728.4lx, and UV level of $0.233mW/cm^2$. Bee traffic and foraging activity were at their greatest at 10:00 and tended to decrease with time. Male watermelon flowers typically dehisced between 10:00 and 12:00. Climatic conditions were significantly correlated with bee activities, including bee traffic and foraging activity. Bee activities were positively correlated with temperature, illuminance level, and UV level but negatively correlated with relative humidity. Temperature had the greatest effect on honeybee behavior. Among the foraging honeybees, the number of high-flying bees that did not pollinate flowers showed a strong positive correlation with temperature, and the number of bees landing on the flowers showed a positive correlation with the UV level. The temperature range inside greenhouses at which the pollination activities of honeybees can be maintained efficiently during winter watermelon pollination was found to be $21{\sim}25^{\circ}C$.

• Korean Journal of Veterinary Research
• /
• v.61 no.2
• /
• pp.13.1-13.8
• /
• 2021

Mammalian reovirus (MRV) causes respiratory and intestinal disease in mammals. Although MRV isolates have been reported to circulate in several animals, there are no reports on Korean MRV isolates from wildlife. We investigated the biological and molecular characteristics of Korean MRV isolates based on the nucleotide sequence of the segment 1 gene. In total, 144 swabs from wild animals were prepared for virus isolation. Based on virus isolation with specific cytopathic effects, indirect fluorescence assays, electron microscopy, and reverse transcription-polymerase chain reaction, only one isolate was confirmed to be MRV from a Korean roe deer (Capreolus pygargus). The isolate exhibited a hemagglutination activity level of 16 units with pig erythrocytes and had a maximum viral titer of 10^5.7 50% tissue culture infectious dose (TCID₅₀)/mL in Vero cells at 5 days after inoculation. The nucleotide and amino-acid sequences of the partial segment S1 of the MReo2045 isolate were determined and compared with those of other MRV strains. The MReo2045 isolate had nucleotide sequences similar to MRV-3 and was most similar (96.1%) to the T3/Bat/Germany/342/08 strain, which was isolated in Germany in 2008. The MReo2045 isolate will be useful as an antigen for sero-epidemiological studies and developing diagnostic tools.

• The Korean Journal of Applied Statistics
• /
• v.34 no.1
• /
• pp.75-98
• /
• 2021

This paper compares three statistical models that examine the relationship between national and provincespecific fertility rates. The three models are two of the regression models and a cointegration model. The regression model is by substituting Gompit transformation for the cumulative fertility rate by the average for ten years, and this model applies the raw data without transformation of the fertility data. A cointegration model can be considered when fitting the unstable time series of fertility rate in probability process. This paper proposes the following when it is intended to derive the relation of non-stationary fertility rate between the national and provinces. The cointegrated relationship between national and regional fertility rates is first derived. Furthermore, if this relationship is not significant, it is proposed to look at the national and regional fertility rate relationships with a regression model approach using raw data without transformation. Also, the regression model method of substituting Gompit transformation data resulted in an overestimation of fertility rates compared to other methods. Finally, Seoul, Busan, Daegu, Incheon, Gwangju, Daejeon and Gyeonggi province are expected to show a total fertility rate of 1.0 or less from 2025 to 2030, so an urgent and efficient policy to raise this level is needed.

• Journal of Periodontal and Implant Science
• /
• v.51 no.1
• /
• pp.18-29
• /
• 2021

Purpose: The aim of this study was to compare the characteristic expression patterns of advanced periodontitis in 2 cohort data sets analyzed using different microarray platforms, and to identify differentially expressed genes (DEGs) through a meta-analysis of both data sets. Methods: Twenty-two patients for cohort 1 and 40 patients for cohort 2 were recruited with the same inclusion criteria. The 2 cohort groups were analyzed using different platforms: Illumina and Agilent. A meta-analysis was performed to increase reliability by removing statistical differences between platforms. An integrative meta-analysis based on an empirical Bayesian methodology (ComBat) was conducted. DEGs for the integrated data sets were identified using the limma package to adjust for age, sex, and platform and compared with the results for cohorts 1 and 2. Clustering and pathway analyses were also performed. Results: This study detected 557 and 246 DEGs in cohorts 1 and 2, respectively, with 146 and 42 significantly enriched gene ontology (GO) terms. Overlapping between cohorts 1 and 2 was present in 59 DEGs and 18 GO terms. However, only 6 genes from the top 30 enriched DEGs overlapped, and there were no overlapping GO terms in the top 30 enriched pathways. The integrative meta-analysis detected 34 DEGs, of which 10 overlapped in all the integrated data sets of cohorts 1 and 2. Conclusions: The characteristic expression pattern differed between periodontitis and the healthy periodontium, but the consistency between the data sets from different cohorts and metadata was too low to suggest specific biomarkers for identifying periodontitis.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.8
• /
• pp.978-984
• /
• 2020

In this study, the correlation between sports records and weather data was analyzed using the big data analysis method. To this end, data was collected by API and crawling, data was processed, statistics were performed, and data visualization was performed. The subject of this study was a player who entered the regular at-bat among outfielders in the 2019 KBO League. In addition, meteorological data were analyzed by using the unpleasant index and above 70 and below 70. As a result of the study, in the various hitting indicators, which are the records that pitchers intervene, the higher the unpleasant index, the better the outfielder's record, but pitchers, walks, pitches, pitching success rates, pitches per turn, pitches per game From the records of the back, it was found that the outfielder made the pitcher difficult. It is expected that this study will help the development of the sports data industry and the performance of baseball players, baseball teams, and coaching staff.

• Journal of The Korean Astronomical Society
• /
• v.55 no.2
• /
• pp.37-57
• /
• 2022

Using I-band images of 35 nearby (z < 0.1) type 1 active galactic nuclei (AGNs) obtained with Hubble Space Telescope, selected from the 70-month Swift-BAT X-ray source catalog, we investigate the photometric properties of the host galaxies. With a careful treatment of the point-spread function (PSF) model and imaging decomposition, we robustly measure the I-band brightness and the effective radius of bulges in our sample. Along with black hole (BH) mass estimates from single-epoch spectroscopic data, we present the relation between BH mass and I-band bulge luminosity (M_BH-M_I,bul relation) of our sample AGNs. We find that our sample lies offset from the M_BH-M_I,bul relation of inactive galaxies by 0.4 dex, i.e., at a given bulge luminosity, the BH mass of our sample is systematically smaller than that of inactive galaxies. We also demonstrate that the zero point offset in the M_BH-M_I,bul relation with respect to inactive galaxies is correlated with the Eddington ratio. Based on the Kormendy relation, we find that the mean surface brightness of ellipticals and classical bulges in our sample is comparable to that of normal galaxies, revealing that bulge brightness is not enhanced in our sample. As a result, we conclude that the deviation in the M_BH-M_I,bul relation from inactive galaxies is possibly because the scaling factor in the virial BH mass estimator depends on the Eddington ratio.

• Advances in concrete construction
• /
• v.13 no.5
• /
• pp.385-394
• /
• 2022

Recently, an increasing number of cutting-edged studies have shown that designing a smart active control for real-time implementation requires piles of hard-work criteria in the design process, including performance controllers to reduce the tracking errors and tolerance to external interference and measure system disturbed perturbations. This article proposes an effective artificial-intelligence method using these rigorous criteria, which can be translated into general control plants for the management of civil engineering installations. To facilitate the calculation, an efficient solution process based on linear matrix (LMI) inequality has been introduced to verify the relevance of the proposed method, and extensive simulators have been carried out for the numerical constructive model in the seismic stimulation of the active rigidity. Additionally, a fuzzy model of the neural network based system (NN) is developed using an interconnected method for LDI (linear differential) representation determined for arbitrary dynamics. This expression is constructed with a nonlinear sector which converts the nonlinear model into a multiple linear deformation of the linear model and a new state sufficient to guarantee the asymptomatic stability of the Lyapunov function of the linear matrix inequality. In the control design, we incorporated H Infinity optimized development algorithm and performance analysis stability. Finally, there is a numerical practical example with simulations to show the results. The implication results in the RMS response with as well as without tuned mass damper (TMD) of the benchmark building under the external excitation, the El-Centro Earthquake, in which it also showed the simulation using evolved bat algorithmic LMI fuzzy controllers in term of RMS in acceleration and displacement of the building.

• Fashion & Textile Research Journal
• /
• v.24 no.1
• /
• pp.95-107
• /
• 2022

In reality, the distinction between the Korean traditional culture and the cultures of other countries is at a delicate boundary. Additionally in the wake of the recent socio-cultural confrontation between Korea and China, it has become necessary to establish the foundation and area of Korean traditional culture and to actively utilize the importance of improving awareness of Korean traditional culture. To reorganize the reckless use of the gold foil pattern shown in the rental hanbok, data on the museum's collection of gold leaf patterns were collected and analyzed. Based on the gold foil, Gilsang characters such as Phoenix pattern, Crane pattern, Bat pattern, Flower pattern, Fruit pattern and recovery advice were extracted through references. The traditional gold foil pattern was reconstructed and relocated to design the gold leaf patch. Based on the collection and analysis of the museum's relics, the Wonsam & Daedae, Dangeui, Sranchima, Sagyusam, Jeonbok, Bokgun, and Daenggi were produced. Therefore, we present the possibility of producing gold foil and modern methods for producing gold foil using laser cutting techniques that can express refinement and complexity well, and gold foil thermal transfer paper with retouchable effects. Additionally, we would like to reflect upon the practicality and the convenience to modern people by considering the complexity and hassle of the traditional gold foil production process, and the disadvantages of processes that require relatively longer time. It intends to help revitalize the market of Korean traditional clothing and fashion products.

• Molecules and Cells
• /
• v.45 no.12
• /
• pp.911-922
• /
• 2022

A structural protein of SARS-CoV-2 (severe acute respiratory syndrome coronavirus 2), nucleocapsid (N) protein is phosphorylated by glycogen synthase kinase (GSK)-3 on the serine/arginine (SR) rich motif located in disordered regions. Although phosphorylation by GSK-3β constitutes a critical event for viral replication, the molecular mechanism underlying N phosphorylation is not well understood. In this study, we found the putative alpha-helix L/FxxxL/AxxRL motif known as the GSK-3 interacting domain (GID), found in many endogenous GSK-3β binding proteins, such as Axins, FRATs, WWOX, and GSKIP. Indeed, N interacts with GSK-3β similarly to Axin, and Leu to Glu substitution of the GID abolished the interaction, with loss of N phosphorylation. The N phosphorylation is also required for its structural loading in a virus-like particle (VLP). Compared to other coronaviruses, N of Sarbecovirus lineage including bat RaTG13 harbors a CDK1-primed phosphorylation site and Gly-rich linker for enhanced phosphorylation by GSK-3β. Furthermore, we found that the S202R mutant found in Delta and R203K/G204R mutant found in the Omicron variant allow increased abundance and hyper-phosphorylation of N. Our observations suggest that GID and mutations for increased phosphorylation in N may have contributed to the evolution of variants.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.6
• /
• pp.493-508
• /
• 2023

Round timber materials of 600 mm length, cut from large-cross-section round timber of red pine (Pinus densiflora S. et Z.) of 450 mm width and 4.2 m length, were prepared as the target of kiln drying in this study. After treating the target materials through end sealing (ES), end sealing - kerfing (ES-K), lateral sealing - end sealing - boring (LS-ES-B), or lateral sealing - partial end sealing (LS-PES), the effects of the treatment on the incidence of drying defects were determined. The target materials with exposed lateral surface and sealed cross surface were steamed at the initial temperature of 65℃ above the official pest control temperature of 56℃, followed by kiln drying toward the final temperature of 75℃. The target materials with sealed lateral surfaces, on the other hand, were dried at the initial temperature of 90℃ at almost the maximum temperature of conventional kiln drying, as there is no risk of early check formation caused by surface moisture evaporation. The final temperature was set at approximately 100℃. The drying time, taken for the target materials with initial moisture content of 70%-80% to reach the target moisture content of 19%, varied across treatment conditions. The measured drying time was 1,146 hours (approximately 48 days) for the timber with sealed cross surface and 745 hours (approximately 31 days) for the timber with sealed lateral surface, until the moisture content reached the target level. The formation of surface checks could not be prevented in the control and ES groups, but a definite preventive effect was obtained for the LS-ES-B and LS-PES groups.