• 한국정보통신학회논문지
• /
• 제18권8호
• /
• pp.1827-1832
• /
• 2014

4세대 이동통신시스템 '롱텀에볼루션(LTE)'의 핵심기술인 다중 송수신 (MIMO) 안테나 시스템은 추가적인 주파수나 송신전력의 할당 없이도 채널 용량을 안테나 수에 비례하여 증가시킬 수 있는 장점으로 인해 데이터 전송 속도를 획기적으로 늘리는 기술로 4세대 이동통신기술 진화의 핵심기술로 꼽히고 있다. 본 논문은 다중 송수신 안테나 시스템에서 사용되는 2개 이상의 DAC 대신에 고속 DAC와 아날로그 스위치를 각각 한 개씩 사용하여 기존 방식의 장점을 유지하며 설계비용 감소, 물리적 크기 축소화 등 경제적 효율을 증가시킬 수 있는 MIMO 시스템에서 데이터 컨버터를 줄일 수 있는 방안을 제안한다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2014년도 추계학술발표대회
• /
• pp.403-404
• /
• 2014

WAVE(Wireless Access in Vehicular Environment)에서 V2V(Vehicle to Vehicle) 통신 시 OBU(On Board Unit)인 자동차 단말은 수신한 정보가 제대로 된 정보인지를 확인하는 과정에서 공인인증서가 필요하다. 동시에 자동차 단말은 이 공인인증서의 상태가 유효한 지를 확인해야 한다. 이것을 확인하는 방법은 자동차 단말이 도로변에 설치돼 있는 RSU(Road Side Unit)인 OCSP(Online Certificate Status Protocol) 서버에게 공인인증서의 상태 확인 요청을 하는 것이다. OCSP 서버는 자동차 단말의 요청에 응답하기 위해서 인증서 폐지 목록인 CRL(Certificate Revocation List)을 가지고 있어야 한다. 본 논문에서는 WAVE 시스템의 OCSP 서버가 공인인증서 상태 정보를 자동차 단말로 알려줄 수 있도록 하기 위해 CA(Certificate Authority)의 CRL 저장소로부터 CRL 을 업데이트 하는 프로토콜을 제안한다. OCSP 서버가 CRL 을 업데이트 할 때, OCSP 서버가 가지고 있는 CRL 과 CRL 저장소가 가지고 있는 CRL 의 값을 비교하여 두 값이 같은 경우에는 CRL 을 업데이트 하지 않도록 한다. OCSP 서버가 선택적으로 CRL 을 업데이트 함으로써 불필요한 부하를 줄일 수 있을 것으로 기대된다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권5호
• /
• pp.2469-2490
• /
• 2019

A low-energy adaptive clustering hierarchy (LEACH) protocol is a low-power adaptive cluster routing protocol which was proposed by MIT's Chandrakasan for sensor networks. In the LEACH protocol, the selection mode of cluster-head nodes is a random selection of cycles, which may result in uneven distribution of nodal energy and reduce the lifetime of the entire network. Hence, we propose a new selection method to enhance the lifetime of network, in this selection function, the energy consumed between nodes in the clusters and the power consumed by the transfer between the cluster head and the base station are considered at the same time. Meanwhile, the improved FTBA algorithm integrating the curve strategy is proposed to enhance local and global search capabilities. Then we combine the improved BA with LEACH, and use the intelligent algorithm to select the cluster head. Experiment results show that the improved BA has stronger optimization ability than other optimization algorithms, which the method we proposed (FTBA-TC-LEACH) is superior than the LEACH and LEACH with standard BA (SBA-LEACH). The FTBA-TC-LEACH can obviously reduce network energy consumption and enhance the lifetime of wireless sensor networks (WSNs).

• Earthquakes and Structures
• /
• 제17권3호
• /
• pp.307-315
• /
• 2019

Building prediction and control theory have been drawing the attention of many scientists over the past few years because design and control efficiency consumes the most financial and energy. In the literature, many methods have been proposed to achieve this goal by trying different control theorems, but all of these methods face some problems in correctly solving the problem. The Evolutionary Bat (EB) Algorithm is one of the recently introduced optimization methods and providing researchers to solve different types of optimization problems. This paper applies EB to the optimization of building control design. The optimized parameter is the input to the fuzzy controller, which gives the status response as an output, which in turn changes the state of the associated actuator. The novel control criterion for guarantee of the stability of the system is also derived for the demonstration in the analysis. This systematic and simplified controller design approach is the contribution for solving complex dynamic engineering system subjected to external disturbances. The experimental results show that the method achieves effective results in the design of closed-loop system. Therefore, by establishing the stability of the closed-loop system, the behavior of the closed-loop building system can be precisely predicted and stabilized.

• Advances in concrete construction
• /
• 제11권1호
• /
• pp.1-9
• /
• 2021

This article discusses the issue of optimizing controller design issues, in which the artificial intelligence (AI) evolutionary bat (EB) optimization algorithm is combined with the fuzzy controller in the practical application of the building. The controller of the system design includes different sub-parts such as system initial condition parameters, EB optimal algorithm, fuzzy controller, stability analysis and sensor actuator. The advantage of the design is that for continuous systems with polytypic uncertainties, the integrated H2/H∞ robust output strategy with modified criterion is derived by asymptotically adjusting design parameters. Numerical verification of the time domain and the frequency domain shows that the novel system design provides precise prediction and control of the structural displacement response, which is necessary for the active control structure in the fuzzy model. Due to genetic algorithm (GA), we use a hierarchical conditions of the Hurwitz matrix test technique and the limits of average performance, Hierarchical Fitness Function Structure (HFFS). The dynamic fuzzy controller proposed in this paper is used to find the optimal control force required for active nonlinear control of building structures. This method has achieved successful results in closed system design from the example.

• Steel and Composite Structures
• /
• 제42권2호
• /
• pp.151-159
• /
• 2022

This study discusses a hypothetical method for tracking the propagation damage of Carbon Reinforced Fiber Plastic (CRFP) components underneath vibration fatigue. The High Cycle Fatigue (HCF) behavior of composite materials was generally not as severe as this of admixture alloys. Each fissure initiation in metal alloys may quickly lead to the opposite. The HCF behavior of composite materials is usually an extended state of continuous degradation between resin and fibers. The increase is that any layer-to-layer contact conditions during delamination opening will cause a dynamic complex response, which may be non-linear and dependent on temperature. Usually resulted from major deformations, it could be properly surveyed by a non-contact investigation system. Here, this article discusses the scanning laser application of that vibrometer to track the propagation damage of CRFP components underneath fatigue vibration loading. Thus, the study purpose is to demonstrate that the investigation method can implement systematically a series of hypothetical means and dynamic characteristics. The application of the relaxation method based on numerical simulation in the Artificial Intelligence (AI) Evolved Bat (EB) strategy to reduce the dynamic response is proved by numerical simulation. Thermal imaging cameras are also measurement parts of the chain and provide information in qualitative about the temperature location of the evolution and hot spots of damage.

• Current Optics and Photonics
• /
• 제7권6호
• /
• pp.755-760
• /
• 2023

In this paper, an illumination optical system that can mitigate the saturation phenomenon in the center of an image (caused by the typical flexible-endoscope illumination system using LEDs with Lambertian light distribution) is designed. When an LED with Lambertian light distribution is used as a light source, the amount of light in the center of the endoscopic illumination system is relatively high, compared to the periphery, causing saturation in the image. Since this phenomenon causes difficulty in detecting the patient's lesion, it is necessary to find a lighting-system design that can alleviate the saturation phenomenon. Therefore, in this paper a lighting system with bat-wing light distribution, which can lower the intensity at the center and secure the maximum amount of light at the maximum light distribution angle, is designed. In addition, to check the performance of the designed lighting system, a simulation of illumination and luminance is conducted for a system using a common aspherical lens with otherwise the same components. As a result, it is confirmed that the lighting system designed in this paper effectively reduces the luminance value at the center and secures more luminance values at the periphery than the familiar lighting system.

• Nuclear Engineering and Technology
• /
• 제56권2호
• /
• pp.666-672
• /
• 2024

In the present work, a new brick series based on the Vietnamese white clay minerals from the Bat Trang was fabricated to be applied in the radiation protection applications during the decommissioning of the nuclear power reactors. The bricks were constructed under various pressure rates varied from 7.61 MPa to 114.22 MPa. The influence of pressure rate on the physical and γ-ray shielding properties were investigated in the study. The experimental measurement for the material's density using the MH-300A density meter showed an enhancement in the prepared bricks' density by 22.5 % with increasing the applied pressure rate while the bricks' porosity reduced by 31.2 % when the pressure rate increased from 7.61 MPa to 114.22 MPa. The increase in the fabricated bricks density and the reduction in their porosities enhances the bricks' linear attenuation coefficients as measured by the NaI (Tl) detector along the energy range extended from 0.662 MeV to 1.332 MeV. The linear attenuation coefficient increased by 13.8 %, 17.6 %, 17.0 %, and 17.1 % at gamma ray energies of 0.662 MeV, 1.173 MeV, 1.252 MeV, and 1.332 MeV, respectively. The enhancement in the linear attenuation coefficient increases the bricks' radiation protection efficiency by 10.22 %, 14.48 %, 14.09 %, and 14.26 % at gamma ray energies of 0.662 MeV, 1.173 MeV, 1.252 MeV, and 1.332 MeV, respectively.

• Journal of the Korean Wood Science and Technology
• /
• 제52권3호
• /
• pp.276-288
• /
• 2024

This study was conducted to reproduce the woodworking process of Baekje wooden storage facilities. Green timber of Quercus spp. was processed using ancient woodworking tools, and the tool-trace formed in this process were compared with the tool-trace of actual excavated artifacts. In the tool-trace analysis, the length and shape of the tool-trace were objectively recorded using a 3D Scan, and that were difficult to confirm with photograph were confirmed through stereoscopic microscope. As a result, there were two types of adze's tool-trace. One of them is minute straight Blade-top trace line when trimming the wood surface and the other is Plucked trace that appear when strongly chop at the wood. When a chisel bat was not used, a long and wide continuous shape blade trace was produced. And when the chisel head was struck with the chisel bat, a straight blade-top trace was regularly observed. Saw-trace was identified in several layers with fine straight stripes. Through this, it was found that the tool-trace of the woodworking tools, which is estimated to have been used in each process, and the tool-trace remaining in the Baekje wooden storage facility coincide.

• 환경생물
• /
• 제33권4호
• /
• pp.394-402
• /
• 2015

본 연구는 제주도에 분포하는 박쥐류상 (Chiroptera)을 밝히기 위해 2006년 7월부터 2015년 6월까지 용암동굴, 해식동굴, 진지동굴, 생태통로 등으로 지역을 구분하여 조사되었다. 또한 제주도 내 박물관에 소장된 박쥐류 표본을 조사하였다. 연구결과, 3과 6속 8종의 박쥐류의 서식이 확인되었는데, 이 결과는 1928년부터 보고된 사전 문헌기록들과는 다소 다른 양상을 나타내었다. 용암동굴과 진지동굴에서는 관박쥐, 흰배윗수염박쥐, 붉은박쥐, 큰발윗수염박쥐, 긴가락박쥐가 공통적으로 서식하는 것으로 확인되었다. 해식동굴에서는 1개 지역에서만 관박쥐가 확인되었고, 생태통로에서는 관코박쥐와 집박쥐를 비롯한 5종이 확인되었다. 지역 내 박물관에 소장된 표본조사 결과 큰귀박쥐의 표본도 확인되었다. 연구를 통해 확인된 8종 외에 큰집박쥐, 작은긴가락박쥐, 윗수염박쥐, 쇠큰수염박쥐, M. branditii, 물윗수염박쥐, 작은집박쥐 등 7종은 확인되지 않았다. 흥미로운 점은 멸종위기종으로 알려진 붉은박쥐와 한반도에서는 드물게 발견되는 흰배윗수염박쥐가 제주도에서 서식하는 것이 확인된 것과, 관코박쥐도 조사과정에서 처음으로 발견되는 등 다양한 장소에서 박쥐류가 서식하고 있음이 확인되었다는 것이다. 이 연구결과는 제주도에서 박쥐류의 보전을 위한 생물다양성 연구나 생태학적 연구를 하는 데 유용한 자료로 활용될 것이라 판단된다.