• CELLMED
• /
• v.3 no.3
• /
• pp.25.1-25.8
• /
• 2013

Homoeopathically prepared Condurango 30C is traditionally used in amelioration of certain types of cancer by homeopathic practitioners. In this study, ability of Condurango 30C in amelioration of the conventional benzo[a]pyrene (BaP)-induced lung cancer in rat has been tested. After one month of scheduled oral feeding of BaP, lung cancer is routinely developed after four months in rats. Tumorbearing rats were then treated with Condurango 30C for the next one ($5^{th}$), two ($6^{th}$) and three ($7^{th}$) months, respectively, and sacrificed. Efficacy of post-cancer treatment by Condurango 30C was evaluated against controls (placebo) by different study parameters like: body and lung weights, number and diameter of lung tumour nodules, lung architecture, DNA damage, anti-oxidant activity and reactive oxygen species (ROS) accumulation. Administration of this homeopathic remedy caused increase of body weight and decrease of lung weight, decrease in number and diameter of lung tumour nodules, particularly after one and two months of drug treatment. BaP intoxication significantly increased lipid peroxidase (LPO) with concomitant decrease in activities of different antioxidants, while Condurango 30C administration certainly reduce their levels than normal and cancerous groups, notably after one and two months' of drug treatment. Condurango 30C showed capability to induce ROS-mediated cell death evidenced from the study of ROS activities at different time-points. Further, the remedy possibly achieved its anticancer goal through mediation of DNA-nicks that possibly led cancer cells to the apoptotic pathway. Thus, Condurango 30C has anticancer potential in BaP-induced lung cancer of rats via tissue damage recovery and ROS-mediated programmed cell death.

• Korean Journal of Agricultural Science
• /
• v.10 no.2
• /
• pp.242-248
• /
• 1983

The effects of light source, plant growth regulators (GA, BA, ABA), and sodium hypochlorite (4% Cl, SH) on germination of 'G rand Rapid' lettuce (Lactuca sativa L.) seed were studied. Seed did not germinate under the conditions of dark and blue light. The treatment of GA or BA did not promote on germination under dark or blue light. The germination percentage under red light was very high, it was similar to the condition of white light. ABA inhibited lettuce seed germination. Although ABA was treated, BA 10ppm treatment was moderately effective under white light condition and BA 10ppm or 50ppm combined with GA 50ppm were also effective on seed germination under dark condition. Presoaking in sodium hypochlorite solution induced germination of lettuce seed in any condition of dark or white light. The optimum presoaking time in sodium hypochlorite solution was twenty min.

• Korean Journal of Plant Tissue Culture
• /
• v.26 no.3
• /
• pp.211-217
• /
• 1999

The effect of auxins and cytokinins on the formation of adventitious shoots, adventitious roots, trichomes, and calli in MS basal medium was investigated in leaf segments from ecotype Columbia of Arabidopsis thaliana. Adventitious shoots, adventitious roots, trichome, and calli were formed from leaf segments by a wide range of hormone concentrations and combinations. Adventitious shoots were formed respectively in treatment with 0.1mg/L IAA and 10 mg/L BA. Adventitious roots were formed in treatments with low concentration of IAA and NAA. Trichomes and calli were formed by increasing the concentration of IAA and NAA. The optimal combination was 0.5mg/L NAA and 0.1mg/L BA for trichome formation, 10mg/L NAA and 10mg/L BA for calli formation. When NAA was treated alone in culture media, adventitious roots were formed in 0.1mg/L, trichomes were formed in 2.0mg/L, and calli were formed in 10mg/L. Inductive time for formation of adventitious roots, trichomes and calli were determined at 6,7 and 18 days respectively by periodical transfer of leaf segments from NAA containing medium to NAA free medium.

• Journal of the Korean Ceramic Society
• /
• v.40 no.1
• /
• pp.62-68
• /
• 2003

Ba-ferrite particles added with Co and Ti, which were known well the additives for the control in coercivity, were synthesized by sol-gel method. In the range 90 to 120 minute reaction time, a stable sol solution which showed no change with temperature, pH, viscosity and aging time. After dried and heat treatment of sol solution, Ba-ferrite phase formed at $700^{\circ}C$ with Differential Thermal Analysis(DTA) and X-Ray Diffractometer(XRD) measurement. The crystallinity became to be better with increasing the temperature. It were showed by Scanning Electron Microscopy(SEM) that Ba-ferrite increased to particle sizes as increasing heating temperature and obtained of narrow particles size distribution. Also, magnetic characteristics of Ba-ferrite powders Co and Ti added were observed by a Vibrating Sample Magnetometer(VSM). Saturation magnetization$(M_s)$ was not much changed, however. the coercivity$(H_c)$dramatically dropped with addition of Co and Ti.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.356-359
• /
• 1997

The Effects of different melting temperature and holding time in the melting temperature on J$\sub$c/ of YBa$_2$Cu$_3$O$\sub$x/ based superconducting bulk using MPMG process were investigated. the value of critical current density was the largest at l120$^{\circ}C$, the melting temperature which is appointed to the mid point of (Y$_2$BaCuO$\sub$5/ + Liquid)region. With the melting temperature in which the value of J$\sub$c/ is the largest, J$\sub$c/ was again measured to see whether the holding time at this proper melting temperature has the effect on the critical characteristics. From the result above it was concluded that the melting temperature and holding time were important to improve the J$\sub$c/ and the formation of the Y$_2$BaCuO$\sub$5/. In this paper, the melting temperature obtained was l120$^{\circ}C$ and propel holding time could be obtained as 20 minute and the more holding time was not effective in the J$\sub$c/ improvement as well as the formation of Y$_2$BaCuO$\sub$5/.

• Korean Journal of Crystallography
• /
• v.12 no.2
• /
• pp.76-80
• /
• 2001

We have studied the effect of sintering conditions on the long-range order parameter of the 1 : 2 cation ordering in Ba(Mg/sub 1/3/Nb/sub 2/3/)O₃microwave dielectrics prepared through a columbite precursor method. It is found that the order parameter depends strongly on the sintering conditions. As the heat-treatment time increases at 1350℃, the long-range order parameter decreases. When sintered at 1500℃ for 4 hours, BMN shows a high long-range order parameter of 0.94.

• Korean Journal of Materials Research
• /
• v.7 no.2
• /
• pp.114-120
• /
• 1997

Perovskite $BaTiO_3$ thin films on stainless steel substrate were prepared by using electrochemical reduction method in solution of $TiCl_4\;and\;Ba(N0_3)_2$. According to current density and electrolysis time. the morphology and thickness of film were varied. Ra/'Ti atomic ratio in $BaTiO_3$ film was controlled by Ha/Ti atomic ratio in solution. Although the excess $TiO_2{\cdot}nH_2O$ film was coated in initial stage of electrolysis. UiilTi atomic ratio in film was nearly constant in later stage. $BaTiO_3$ film precursor was obtained under the condition of $1OmA/cm^2$ current density and Smin electrolysis time. $BaTiO_2$ thin films with perovskite phase were formed 11,. the heat treatment above $500^{\circ}$.

• Membrane and Water Treatment
• /
• v.4 no.4
• /
• pp.277-291
• /
• 2013

The transport and recovery of Levafix brilliant red E-4BA and Levafix brilliant red E-6BA were investigated using polytetrafluoroethylene (PTFE) fiber based supported liquid membrane containing tetra butyl ammonium bromide (TBAB) in coconut oil as a carrier. The influencing parameters studied are: pH of the feed solution, concentration of dye in the feed solution, extractant concentration, and various kind of stripping agent, rate of stirring, time of transport, reusability of membrane and stability of membrane. Increase in TBAB concentration inside the membrane enhances the flux with its maximum value at $1.553{\times}10^{-4}$ M TBAB. Further increase in the concentration of TBAB leads to decreased rate of transport due to increase in viscosity of membrane liquid. The optimum conditions for dye transport are: pH of feed ($7{\pm}0.1$), $1.553{\times}10^{-4}$ M extractant concentration, 350 rpm for stirring, $4.9{\times}10^{-1}$ M potassium hydrogen phthalate as a stripping solution, the time of transport 6 h. It was noticed that flux values were increased with increasing dye concentration in the feed phase. Applying this study to textile wastewater, dyes were transported up to 98% in 6 h. This recovery technique is rewarding to environment and economic.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.5
• /
• pp.319-325
• /
• 1999

Direct current(d.c.)leakage current voltage characteristics of radio-frequencymagnetron sputtered BaTa\sub 2\O\sub 6\ film capacitors with aluminum(A1) top and indium tin oxide (ITO) bottom electrodes have been investigatedas a function of applied field and temperature. In order to study surfacetreatment effect on the electrical characteristics of as-deposited film weperformed exposure of oxygen plasma on $BaTa_2O_6$ surface. d. c.current-voltage (I-V), bipolar pulse charge-voltage (Q-V), d. c. current-time (I-t) andcapacitance-frequency (C-f) analysis were performed on films. All ofthe films exhibita low leakage current, a high breakdown field strength (3MV/cm-4.5MV/cm), and high dielectric constant (20-30). From the temperature dependence of leakage current,we can conclude that the dominant conduction mechanism is ascribed toSchottky emission at high electric field (>1MV/cm) and hopping conduction at lowelectric field (<1MV/cm). According to our results, the oxide plasma surfacetreatmenton as-deposited $BaTa_2O_6$ resulted in lowering interfacebarrier height and thus, leakage current when a negative voltage applied to the A1 electrode. This can be explained by reduction of surface contamination via etching surface and filling defects such as oxygen vacancies.

• Current Research on Agriculture and Life Sciences
• /
• v.7
• /
• pp.41-46
• /
• 1989

The seeds of Malus sieboldii were collected in late fall of 1988 and stored in cold stratification condition for 15 weeks. Growth regulators such as $GA_3$, BA and ABA were treated to the seed to know germination capacity and seedling growth. The results were as follows. 1) Higher germination was achieved in $GA_3$ and BA plots, But ABA treatment showed lower germination percentage and physiological dwarf and also induced to the secondary dormancy condition in partly. 2) Average length of time for germination was delayed over 2 days in ABA plot when comparing with the other plots. 3) Average length of plumule and radicle also was inhibited by ABA treatment. This means lower seedling vigor. 4) Fresh and dry weight of the seeding were higher in BA plot while ABA plot was lower and undesirable seedling was produced. From above mentioned results, it is believed that ABA treatment to the seed induced the secondary dormancy and physiological dwarf pattern. Therefore, utilization of BA can be produced the normal seedling, the authors believed.