• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 춘계종합학술대회
• /
• pp.787-790
• /
• 2003

OADM (optical add-drop multiplexer)과 광트랜시버 (optical transceiver)를 사용하여 1510 nm와 1530 nm 파장을 각각 upload용과 download용으로 사용하여 광선로의 추가적인 포설없이 기존의 광선로를 재활용함으로써 비용 절감효과와 통신용량의 증가 사용자수의 증가 등 다양한 이익을 창출할 수 있다. 먼저 기존의 2개 파장이 지나는 광섬유에 fusion splicer를 이용하여 OADM을 부착하고, 1510 nm 와 1530 nm 파장을 DFB (distributed feedback) LD (laser diode) 와 tunable LD를 사용하여 파장의 변화를 관찰하였다. 이때 광통신 시 발생하는 감쇠 및 손실 특성을 알아보았으며 광트랜시버의 핵심부품중 하나인 LNA (low noise amplifier)를 balanced 타입으로 직접 제작하여 network analyzer로 측정한 결과 각각의 S$_{11}$, S$_{21}$, S$_{22}$는 -19.98 dB, 11.5 dB, -20.02 dB의 값이 얻어졌다.다.

• 한국전자통신학회논문지
• /
• 제10권5호
• /
• pp.549-556
• /
• 2015

본 논문에서는 인셋 급전 구조에서 마이크로스트립 패치 안테나 소형화를 위해 접지면에 CSLR 9개 적용한 안테나('CSLR 09' 안테나)와 8개 적용한 안테나('CSLR 08' 안테나)를 설계한 후, 유전율 2.5, 두께 0.787 mm인 기판으로 안테나를 제작하여 반사손실과 복사패턴에 대한 이론 결과와 실험 결과를 비교하였다. 'CSLR 09'와 'CSLR 08' 안테나의 이론 결과에서는 공진주파수 2.82 GHz에 반사손실이 각각 -25.35 dB와 -16.77 dB를 보였고, 측정결과에서는 공진주파수 2.885 GHz에 반사손실이 각각 -30.72 dB와 -14.90 dB를 나타내어 두 경우 모두에서 거의 일치하는 결과를 얻었다. 또한 E-면과 H-면 복사패턴에 대한 실험 결과에서도 이론 결과와 거의 일치하는 양호한 결과를 얻었다.

• 한국통신학회논문지
• /
• 제32권8B호
• /
• pp.529-538
• /
• 2007

본 논문에서는 2003년 전 세계의 인터넷망에서의 심각한 소통 장애를 일으켰던 슬래머 웜 보안공격의 전파 전과정을 NS-2를 이용한 시뮬레이터로 분석하였다. 기존 연구에서는 Detailed Network-Abstract Network(DN-AN) 모델 기반의 Abstract Network-Abstract Network(AN-AN)모델을 이용한 분석이 수행되었다. 이러한 AN-AN모델은 패킷 레벨까지 정확한 분석이 가능하지만, 초기 300초의 감염구간을 모의실험 하는데 240시간이 소요되는 시간상 문제점이 있었다. 본 논문에서는 이러한 문제점을 해결하기 위한 축소된 모델링 기법을 제시하여 모의실험에 필요한 소요시간을 단축함으로써 소통 장애가 일어난 3.5시간을 107시간에 분석할 수 있었다. 아울러 기존 분석에서는 감염 호스트가 인위적인 치료나 격리 조치가 있을 때까지는 모두 동작하는 것으로 가정하였지만, 슬래머의 과도한 감염 트래픽으로 중계 라우터의 동작이 중지되는 현상에 의해 해당 장비가 감염과정에서 자연적으로 격리되는 격리율 0.00022도 함께 고려하였다. 모의실험 결과, 국제관문국의 국외$\Longrightarrow$국내방향은 4,787초에 정상 상태로 돌아온 반면, 국내$\Longrightarrow$국외방향이 3.5시간동안 포화가 되어 소통 장애가 지속됨을 알 수 있었다.

• 한국소음진동공학회논문집
• /
• 제21권9호
• /
• pp.787-797
• /
• 2011

The noise in a vehicle is an important factor for customers purchasing a car. Particularly, reduction of the noise that is generated from HVAC(heating, ventilation and air conditioning) is very important since it has considerable effects on interior noise. In general, identification of noise source is crucial to reduce noise level. The complex acoustic intensity method is widely used to obtain the accurate measurement and identification of noise source. Therefore, in the previous study, noise source of HVAC was identified through experimental approach using the complex acoustic intensity method. In this study, we are intended to confirm reduced level of noise by comparing the result between before and after modification of cam curve that is based on identified noise source of HVAC. It is found out that noise source of HVAC are motor and cam area using the complex acoustic intensity method in the previous study. We performed experiments to compare noise level between before and after modification of cam curve. Especially, it can be seen that complex acoustic intensity method using both active and reactive intensity is vital in devising a strategy for comparison to noise level. Also, the vector flow of acoustic intensity was investigated to identify sound intensity distributions and energy flow in the near field of HVAC.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권2호
• /
• pp.787-792
• /
• 2015

Background: Non-Hodgkins lymphoma (NHL) is a heterogeneous group of malignancies, originating in the lymphatic organs, whose incidence is increasing in developed as well as developing countries. Epidemiological evidence suggests that aspirin may reduce the incidence and mortality of several cancers. The main objective of this study was to evaluate the potential relationship between using aspirin and development of NHL with a meta-analysis. Materials and Methods: A total of 7 studies were included. Outcome was calculated and reported as odds ratios (ORs). Heterogeneity was assessed with Cochrane Q and $I^2$ statistics. Dissemination bias was evaluated by funnel plot visualization and trim-and-fill analysis. Results: Our analysis showed OR of developing NHL overall of 1(95% CI: 0.87-1.16, p=0.9), and in females this was 0.81 (95%CI: 0.72-.92, p=0.001) and in males 1.01 (95%CI: 0.82-1.26, p=0.86). The odds ratio (OR) of chronic lymphocytic leukemia/small lymphocytic lymphoma (CLL/SLL) was 0.85 (95%CI: 0.75-0.97, p=0.02), The ORs of follicular lymphoma (FL) and large B-cell lymphoma (DLBCL) in individuals exposed to aspirin were 1.12 (95%CI: 0.86-1.45, p=0.37) and 1.03 (95%CI: 0.9-1.19, p=0.6) respectively. Conclusions: In conclusion, individuals taking aspirin do not demonstrate any change in risk of Non-Hodgkins lymphoma.

• Computers and Concrete
• /
• 제17권6호
• /
• pp.787-799
• /
• 2016

Climate anomalies in recent years, numerous natural disasters caused by landslides and a large amount of entrained sands and stones in Taiwan have created significant disasters and greater difficulties in subsequent reconstruction. How to respond to these problems efficaciously is an important issue. In this study, the sands and stones were doped with recycled materials (waste LCD glass sand, slag powder), and material was mixed for recycled ready-mixed soil. The study is based on security and economic principles, using flowability test to determine the water-binder ratio (W/B=2.4, 2.6, and 2.8), a fixed soil: sand ratio of 6:4 and a soil: sand: glass ratio of 6:2:2 as fine aggregate. Slag (at concentrations of 0%, 20%, and 40%) replaced the cement. The following tests were conducted: flowability, initial setting time, unit weight, drop-weight and compressive strength. The results show that the slump values are 220 -290 mm, the slump flow values are 460 -1030 mm, and the tube flow values are 240-590 mm, all conforming to the objectives of the design. The initial setting times are 945-1695 min. The unit weight deviations are 0.1-0.6%. The three groups of mixtures conform to the specification, being below 7.6 cm in the drop-weight test. In the compressive strength test, the water-binder ratios for 2.4 are optimal ($13.78-17.84kgf/cm^2$). The results show that Recycled ready-mixed soil materials (RRMSM) possesses excellent flowability. The other properties, applied to backfill engineering, can effectively save costs and are conducive to environmental protection.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.782-787
• /
• 2001

An optimum thermal design analysis of the combined cycle power plant with triple pressure heat recovery steam generator was performed by the numerical simulation. The optimum design module used in the paper is DNCONF, a function of IMSL Library, which is widly known as a method to search for the local optimum. The objective function to be minimized is the cost of total power plant including the steam turbine power enhancement premium. The result of this paper shows that the cost reduces if the design point of power plant becomes the local optimum, and many calculations at various initial conditions should be carried out to get the value near the global optimum.

• 대한기계학회논문집A
• /
• 제32권9호
• /
• pp.782-787
• /
• 2008

First, the effect of the geometry such as the curved shape of the struts composing the truss structure of WBK is elaborated. Then, analytic solutions for the material properties of WBK and the maximum loads of a WBK-cored sandwich panel under bending are derived. A design optimization with the face sheet thickness and the core height selected as the design variables is presented for given slenderness ratios of the WBK core. Unless the face sheet thickness is limited, the optimal design to give the maximum load per weight is always found at a confluence of three failure modes, namely, face sheet yielding, indentation plastic, and core shear modeB plastic.

• 비파괴검사학회지
• /
• 제30권1호
• /
• pp.54-59
• /
• 2010

After the advent of B787(Boeing Co.), a civil aircraft using composite materials more than 50% of it total structural weight for weight savings，best performances and efficiencies, various endeavors to develop and apply the state of art of structural health monitoring(SHM) technologies for composite aircraft have been made for many years. Despite their plentiful advantages composite aircraft structures are susceptible to the hidden or barely visible impact damages(BVID) and excessive loads that if unchecked may lead to lower structural integrity, loss of operational performance and finally a sudden catastrophic failure of the aircraft structure. In this paper background of SHM technology and relevant technologies for application of SHM technology to the composite aircraft in the near future and requirements for certification of SHM system are shortly presented.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권2호
• /
• pp.787-806
• /
• 2016

Traditional radio-based gesture recognition approaches usually require the target to carry a device (e.g., an EMG sensor or an accelerometer sensor). However, such requirement cannot be satisfied in many applications. For example, in smart home, users want to control the light on/off by some specific hand gesture, without finding and pressing the button especially in dark area. They will not carry any device in this scenario. To overcome this drawback, in this paper, we propose three algorithms able to recognize the target gesture (mainly the human hand gesture) without carrying any device, based on just Radio Signal Strength Indicator (RSSI). Our platform utilizes only 6 telosB sensor nodes with a very easy deployment. Experiment results show that the successful recognition radio can reach around 80% in our system.