• 대한화학회지
• /
• 제39권6호
• /
• pp.440-445
• /
• 1995

메탄올 용액에서 Nd(III)과 B15C5(benzo-1,4,7,10,13-pentaoxacyclopentadecane)의 치환체들간의 착물형성에 따른 화학적 조겅비 및 온도변화에 따른 안정도상수, 열역학적 파라메타들을 분광광도법과 전기전도도법을 이용하여 결정하였다. 이때 B15C5의 치환기들은 $CH_3,\;Br\;CHO,\;NO_2$ 및 43,4-(NO_2)_2$이었다. 메탄올 용액에서 Nd(III)과 이들 리간드와의 착물의 조성비는 1:1임을 알 수 있었으며, 안정도상수는 치환기효과에 $B15C5-3,4(NO_2)2 의하여 순으로 증가함을 알 수 있었다. 또한 용매변화에 따른 안정도상수의 순위는 용매 염기도(DN)에 역비례하는데 이는 용매의 염기도, 리간드의 염기도, 금속이온의 용매화 현상 및 착물형성에 따른 엔트로피변화 등으로 설명할 수 있었다.

• 한국세라믹학회지
• /
• 제40권1호
• /
• pp.18-23
• /
• 2003

정량의 B$_2$O$_3$/A1/C의 혼합분말을 화학노 대신 고압의 알곤 분위기를 사용하여 SHS 공정으로 B$_4$C-A1$_2$O$_3$ 복합분말을 제조하였다. 2B$_2$O$_3$+4A1+C=B$_4$C-2A1$_2$O$_3$의 반응식에 해당하는 B$_2$O$_3$(-100 메쉬), Al(-200 메쉬), C(-200 메쉬)의 분말을 2시간 건식 볼밀로 혼합한 후, 고온 고압의 SHS 반응기에 넣고 약 10기압의 알곤 분위기에서 점화하여 SHS을 일으켰다. 반응 생성물은 XRD 분석으로 안과 겉이 균일하게 반응이 일어났으며 반응 생성물로 화학노 사용시 동반되는 부산물 AlB$_{12}$C$_2$가 없는 B$_4$C-A1$_2$O$_3$ 복합 분말을 얻었다. 이 복합 분말은 SEM으로 보면 약 0.3~l $mu extrm{m}$ 크기의 결정이 모인 약 60~100$\mu\textrm{m}$ 크기이었다. 그러나 약 15기압을 사용하였을 때는 부분 소결이 일어나 15~25$\mu\textrm{m}$ B$_4$C 분말에 0.1~0.2$\mu\textrm{m}$의 알루미나가 분산되어 있는 고강도의 복합 분말이 생성되었다.

• 한국자기공명학회논문지
• /
• 제17권1호
• /
• pp.24-29
• /
• 2013

The structural characteristics of 4-coordinate $BO_4$ [B(1)] and 3-coordinate $BO_3$ [B(2)] groups in $BiB_3O_6$ were studied by $^{11}B$ magic angle spinning (MAS) and single-crystal nuclear magnetic resonance (NMR) spectroscopy. The spin-lattice relaxation time in the laboratory frame, $T_1$, for $^{11}B$ decreased slowly with increasing temperature, whereas the spin-lattice relaxation times in the rotating frame, $T_{1{\rho}}$, for B(1) and B(2), which differed from $T_1$, were nearly constant. Further, $T_{1{\rho}}$ for B(1) and B(2) showed very similar trends, although the $T_{1{\rho}}$ value of B(2) was shorter than that of B(1). The 3-coordinate $BO_3$ and 4-coordinate $BO_4$ were distinguished by $^{11}B$ MAS NMR spectrum and $T_{1{\rho}}$.

• 한국세라믹학회지
• /
• 제36권9호
• /
• pp.974-981
• /
• 1999

• 약학회지
• /
• 제50권6호
• /
• pp.403-408
• /
• 2006

1-Amino-5,6-dimethoxyindan hydrochloride was synthesized from 3- (3,4-dirnethoxyphenyl)propionic acid by intramolecular Friedel-Crafts acylation, oximation with hydroxylamine, and reduction with an overall yield of 74%. 2-Amino-5,6-dimethoxyindan hydrochloride was synthesized from 3-(3,4-dirnethoxyphenyl)propionic acid by intramolecular Friedel-Crafts acylation, oximation with isoamylnitrite, reduction in NaOH and reaction with HCI to form 5,6-dimethoxy-2-indanone, which was reacted with hydroxylamine and reduced with an overall yield of 42%. 5,6-Dimethoxyindan-1,2-dione-2-oxime, which was catalytically hydrogenated to afford cis-, and trans-1-amino-5,6-dimethoxyindan-1-ol as 3 : 1 ratio. This mixture was treated with Li and reacted with chloroacetyl chloride. Cis isomer was acylated and cyclized to synthesize rir -( ${\pm}$ )-7,8-dimethoxy-4,4a,5,9b-tetrahydroindeno[1,2-b][1,4]oxazin-3(2H)-one, but trans isomer was just acylated to form amide.

• 한국세라믹학회지
• /
• 제33권9호
• /
• pp.1038-1044
• /
• 1996

The variations of sintering and electrical characteristics of semiconducting BaTiO3 ceramics with sintering agents added were investigated comparing the case of BaB2O4 addition to BN and TiO2 addition. When BaB2O4 added in BaTiO3 ceramics the densitifcation of specimen could be acheived more easily and recvealed the better PTCR characteristics than BN and TiO2 addition. As increase of addition of BaB2O4 in BaTiO3 spec imens the slope of resistivity jump also increased but the temperature of maximum resistivity decreased, It was supposed that addition of BaB2O4 led to increase of Ns (acceptor state density) value at grain boundaries.

• 미생물학회지
• /
• 제28권4호
• /
• pp.351-363
• /
• 1990

A mutant was selected by NTG treatment of Mycobacterium sp. NRRL B-3805, which was capable of degrading plant sterol to androsta-4-ene-3, 17-dione and yields was higher than NRRL B-3805. Also this mutant produced androst-4-ene-3, 17-dione faster than NRRL B-3805. It described the mode of sitosteroidal degradation, and the interrelation between cell membrane and its attachment to substrate during the sterol degradation process by this mutant and it was compared with Mvcobacterium sp. NRRL B-3805.

• Molecules and Cells
• /
• 제25권4호
• /
• pp.487-493
• /
• 2008

HoxB4 has been shown to enhance hematopoietic engraftment by hematopoietic stem cells (HSC) from differentiating mouse embryonic stem cell (mESC) cultures. Here we examined the effect of ectopic expression of HoxB4 in differentiated human embryonic stem cells (hESCs). Stable HoxB4-expressing hESCs were established by lentiviral transduction, and the forced expression of HoxB4 did not affect stem cell features. HoxB4-expressing hESC-derived CD34+ cells generated higher numbers of erythroid and blast-like colonies than controls. The number of CD34+ cells increased but CD45+ and KDR+ cell numbers were not significantly affected. When the hESC derived CD34+ cells were transplanted into $NOD/SCID{\beta}2m-/-$ mice, the ectopic expression of HoxB4 did not alter their repopulating capacity. Our findings show that overexpression of HoxB4 in differentiating hESCs increases hematopoietic colony formation and hematopoietic cell formation in vitro, but does not affect in vivo repopulation in adult mice hosts.

• 미생물학회지
• /
• 제17권4호
• /
• pp.165-178
• /
• 1979

Phages of Lactobaciilus casei (PLC) isolated from plant drainage were classified and characterized. The results are as follows : 1. On the basis of host range pattern, phages could be divided into 2 groups (PLC-B and PLC-C). PLC-B group phages could be further divided into 5 sub-groups $(B_1, \;B_2, \;B_3, \;B_4, \;and\;B_5)$. Although PLC-C group phages had the same host range, they could be also divided into 2 sub-groups $(C_1\;and\;C_2)$ by morphlogical type. 2. It was $B_3$ group phages that represented a major proportion (44.4%) of phages tested. However, $B_1$ group phages were shown to have the widest host range. 3. Electron micrographs revealed that the phages fell into three different morphological types. $(B_1, \;B_2, \;and\;B_3)$ group phages hd a hexagonal head (52nm in diameter) and a sheathless noncontractile (245 nm in length). $B_4\;and\;C_2$ group phages had a hexagonal head (56 nm) and a short flexible tail (169nm) having no sheath. $B_5\;and\;C_1$ group phages were shown to have a hexagonal head (81 nm) and a contractile tail (140 nm) having a sheath, a base plate and tail fibers. 4. The inactivation of the phages by antisera indicated that serological relationships correlated completely with morphological types. 5. $B_1, \;C_1\;and\;C_2$ group phages produced a large (1, 2 mm in diameter) plaque with a clear ring. The morphology of plaques of $B_3\;and\;B_5$ group phages was the same as those produced by the above, but the average plaque sizes for $B_3\;and\;B_5$ were 0.8 mm abd 0.5 mm, respectively. $B_2\;and\;B_4$ group phages produced a small (0.5 mm) turbid plaque with an irregular edge. 6. The latent period and the average burst size of $B_1\;and\;B_3$ group phages were 90 min and 100, respectively. These phages reuqired calcium ions for their miltiplication. 7. $B_3$ group phages could not be absrobed to R-variant $KC_1$. 8. The order of resistance of phages to heat was $B_2\;>\;B_1, B_4\;and\;B_5\;>\;B_3\;and\;C_2, \;B_5$ group phages were more stable than $B_3$ in various pH values. $C_2$ group phages were more sensitive to UV irradiation than $B_1\;and\;B_3$ group phages. 9. Strains YIT9018 and IAM 1043 were induced by mitomycin C treatment. Phage particles detected in the lysates had a hexagonal head (38 and 49 nm, respectively), but no tail. Any sensitive indicator strain could not be isolated in spite of repaeated trials.

• 한국재료학회지
• /
• 제9권3호
• /
• pp.307-314
• /
• 1999

반응생성에 의한 Ti/TiB 복합재료를 제조하기 위한 반응분말$(TiB_2, B_4C)$, 소결온도, 소결시간을 결정하기 위하여 제조조건에 따른 반응생성상, 미세조직, 상대밀도 등을 조사하였다. 제조된 복합재료의 기계적 성질은 상온 압축항복강도로 평가하였다. 복합재료를 제조하기 위하여 혼합하는 $TiB_2$반응분말의 경우 $1300^{\circ}C, B_4C$ 반응분말의 경우 $1400^{\circ}C$의 소결온도가 최적조건임을 확인하였다. 본 공정에 의해서 제조된 복합재료의 압축항복강도는 비교재인 Ti-6Al-4V 보다 모두 우수하였다. 또한 $TiB_2$반응분말에 의해서 제조된 복합재료가 $B_4C$ 반응분말에 의해서 제조된 복합재료보다 우수한 압축항복강도를 나타내었다. 이는, 압축시험한 복합재료에서의 균열전파양상을 조사한 결과, 강화상과 기지간의 접합특성을 $B_4C$ 반응분말에 의한 복합재료의 접합특성보다 우수하였기 때문이었다.