• Korean Journal of Poultry Science
• /
• v.34 no.3
• /
• pp.231-236
• /
• 2007

A feeding trial was conducted to study the effects of dietary supplement of fermented clay mineral (FCM) on the growth performance and immune stimulation in broiler chickens. A total of 36,800 broilers, (of) Ross strain-208, were randomly allotted into 2 experimental (diet) groups. Control group was fed the basal diet (corn-soybean meal based), and treatment group was fed the natural clay mineral that was fermented with aboriginal microorganisms at $37^{\circ}C$ for 72 h. Feed and water were provided ad libitum throughout the experiment for 5 weeks of experimental feeding period. Daily weight gain of treatment group fed 0.3% fermented clay mineral was significantly increased in comparison with control group. Feed intake of treatment group was significantly increased 21.4% (p<0.05), and feed efficiency was also increased 2.7% compared to control group. Especially, growth rate and production index of treatment group were significantly higher as much as 4.4% and 4.8%, respectively, than those of control group (p<0.05). By the feeding of dietary 0.3 % FCM, the antibody productions against Newcastle Disease and Infectious Bursal Disease antigens were shown to increase 13.8 % and 15.7 %, respectively, more than control group chickens. From these results, it appears that the supply of fermented clay mineral at 0.3 % level in the broiler chicken diet could enhance the growth performance and immune stimulation of broiler chickens.

• Journal of Arbitration Studies
• /
• v.10 no.1
• /
• pp.3-25
• /
• 2000

At its thirty-second session in 1999, the UNCITRAL had before it the requested note entitled "Possible future work in the area of international commercial arbitration." After concluding the discussion on its future work in the area of international commercial arbitration, it was agreed that the priority items for the working group should be conciliation, requirement of written form for the arbitration and enforceability of interim measures of protection. the Commission entrusted the work to the Working Group on Arbitration which held its thirty-second session at Vienna from 20 to 31 March 2000. The Working Group discussed agenda item 3 on the basis of the report of Secretary General entitled "Possible uniform rules on certain issues concerning settlement of commercial disputes : conciliation, interim measures of protection, written form for arbitration agreement." At its thirty-three session in 2000, the UNCITRAL had before it the report of Secretary General on agenda item 3 discussed by the Working Group. The Working Group discussed the issues relating to certain aspects of conciliation proceedings ; (1) Admissibility of certain evidence in subsequent judicial or arbitral proceedings ; (2) Role of conciliatior in arbitration or court proceedings ; (3) Enforceability of settlement agreements reached in conciliation proceedings ; (4) Other possible items for harmonized treatment : a) Admissibility or desirability of conciliation by arbitrators b) Effect of an agreement to conciliate on judicial or arbitral proceedings c) Effect of conciliation on the running of limitation period d) Communication between the conciliator and parties ; disclosure of information e) Role of conciliator. It was generally considered that decisions as to the form of the text to be prepared should be made at a later stage when the substance of prepared solutions would become clearer. However, it was noted that model legislative provisions seemed to be appropriate form for a number of matters proposed to be discussed in the area conciliation. There was general support in the Working Group for the proposition to perpare a legislative regime governing the enforcement of interim measures of protection ordered by arbitral tribunals. It was generally considered that legislative regime should apply to enforcement of interim measures issued in arbitration taking place in State where enforcement was sought as well as outside that State. It was generally observed that there was a need for provisions which conformed to current practice in international trade with regard to requirements of written form for arbitration agreement. The view was adopted by the Working Group that the objective of ensuring a uniform interpretation of the form requirement that responded to the needs of international trade could be achieved by : preparing a model legislative provision clarifying, for avoidance of doubt, the scope of article 7(2) of the UNCITRAL Model Law on International Commercial Arbitration : and adopting a declaration, resolution or statement addressing the interpretation of the New York Convention that would reflect a broad understanding of the form requirement. There was general agreement in the Working Group that, in order to promote the use of electronic commerce for international trade and leave the parties free to agree to the use of arbitration in the electronic commerce sphere, article II(2) of the New York Convention should be interpreted to cover the use of electronic means of communication as defined un article 2 of the Model Law on Electronic Commerce and that it required no amendment to do that. The UNCITRAL may wish to consider to the desirability of preparing uniform provisions on any of those issues concerning conciliation and arbitration proceedings, possibly indicating whether future work should be towards a legislative text or non-legislative text.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.1
• /
• pp.17-24
• /
• 2007

This study was carried out to classify the streams at rural watersheds by characteristics of water quality. The water quality data of 319 steams at rural watersheds in Korea were selected. Multivariate analysis was used for this purpose. The cases were divided into 5 types, and then factor analysis and cluster analysis were done. The characteristics of water quality of rural watersheds can be showed more than 40% of total water quality by first factor(organic matters and nutrients). The cluster analysis of extracted factors using factor analysis was carried out. The results showed that the Case 1 and Case 2 were classified 4 communities, Case 3 was classified 5 communities and Case 4 and 5 were classified 3 communities. Among 5 types cases, to classified the steams of rural watersheds, Case 4 - 7 water quality items - was selected as a desirable case. Many kinds of statistical analysis can be used to classify the streams of rural watersheds. Our results showed a good example to evaluate the water quality properties in Korean rural watershed.

• Journal of Korean Society of Forest Science
• /
• v.17 no.1
• /
• pp.35-42
• /
• 1973

Deciduous trees grown naturally in the forest of Korea usually have an irregular Lee-form and their utility has been decreased. In Korea, most of the deciduous stands are distributed in the hinterland. A shortage of the total growing stock made utilization of them necessary in this country even though some difficulties to be cutted and transported are accompanied. Therefore, this study was conducted to select the suitable sampling method for surveying them. The results investigated are as follows. 1. Three locations being 10 hectares in each location for the plots were chosen and surveyed with six $20m{\times}50m$ rectangular sample plots by four types of sampling method below. And the result is shown in Table 1. A. Random sampling by grids B. Random sampling by co-ordinates C. Systematic line plot. D. Sub-sampling 2. One hundred and fifty hectares from all plots were sectioned through the application of aerial photography scaled of 1 : 15,000. The author divided forest types according to diameter class and crown density with mirror stereoscope. The forest types were divided into three classes. Seven sample plots from the area of 150 hectars are systematically arranged and the results investigated on the circular sample point of 0.1 hectare are shown in Table 4. 3. There were no significant differences between results by sampling method and by diameter measurement method (population mean) as shown in Table 3. 4. Random sampling by grid and systematic line plot are better than others. 5. There are more over-estimated values when the circular sample point is used than where the rectangular sample point. 6. As forest stands are irregular, smaller number of sample points will make many errors.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.3
• /
• pp.320-326
• /
• 2012

This study was conducted to investigate the antibacterial and antioxidative activities of water and ethanol extracts from a mixture of roasted coffee and red ginseng. The antibacterial effects of each extract were determined by the classical paper disc method. A water extract of mixture samples inhibited growth of all strains, but antibacterial effects were mostly weakened. Ethanol extracts showed stronger antibacterial effects than water extracts in all strains except Gram negative Escherichia coli and the fungi strain Candida albicans. Also, the antibacterial effect of the Bacillus cereus strain appeared in all samples, and the ES2 sample formed a clear zone of 19 and 20 mm against Pseudomonas aeruginosa and S. Typhimurium respectively (MIC=0.25 and 0.125 mg/mL). Determinations of free radical elimination for the different mixture extracts using 1,1-diphenyl-2-picrylhydrazyl (DPPH) were compared with ascorbic acid and butylated hyderoxytoluene as positive controls. The water and ethanol extracts of mixture samples (100 ${\mu}g/mL$) showed 55.38~60.01% and 59.37~70.50% DPPH scavenging activities, respectively. DPPH scavenging activities of all mixture samples were slightly higher than roasted coffee and red ginseng samples. However, DPPH scavenging activity decreased when red ginseng extract composed more than 70% of the total extract. The total polyphenol in the mixture samples measured by the Folin-Denis method revealed the highest level of polyphenol content in ethanol extract of sample 3, whereas polyphenol content differed with different mixture ratios, ranging from 105.16~119.79 mg/g in ethanol extract. In the water extract, the polyphenol content was greatest with water extract of sample 1, whereas in other samples the content varied from 93.75~109.18 mg/g.

• Journal of Oriental Neuropsychiatry
• /
• v.21 no.4
• /
• pp.21-39
• /
• 2010

Objectives : This study was to investigate the characteristics of the heart rate variability(HRV), types of insomnia and accompanying symptoms of 175 insomnia patients. Methods : For this study we carried out HRV, Inbody of 175 patients with insomnia who have come to Dongeui oriental hospital of Dongeui university from the period of Janaury 2008 to September 2010. We studied the association of the insomnia patients' age and gender with HRV, accompanying symptoms and the types of insomnia. The information of the accompanying symptoms and types of insomnia was based on each patients' progress note. Results : l. There was no significant differences in the characteristics of HRV between male and female. 2. The most frequent symptom shown among the insmonia patents' was headache(41.14%). 3. Comparing the symptoms between the gender, female patients had more dry mouth, alternative periodic chill and fever, and hot flush symptoms than the male patients. 4. Comparing the symptoms between the age groups(divided in two), the lower age group (20~59) had more dizziness and constipation symptoms than the higher age group (over 60). 5. Comparing the types of insomma between the age group, the higher age group (over 60) had more termination insomnia. 6. The types of insomnia of the entire insomnia patients were onset insomnia (73.1%), maintenance insomnia(20.6%), termination insomma(l7.1 %), shallow sleep (52.6%), listed by order of frequency. 7. The patients who takes hypnotics had more anorexia symptoms than the patients who doesn't take hypnotics. 8. There was no visible differences of the average fractal portrait between male and female. The age group of 20~30yrs. had the highest average fractal portrait, and the age group of 30~59yrs. the second highest, and the age group over 60yrs. the lowest. 9. The average of the regulation reserves of the autonomic nervous system(B2) - was lower than the regulation level of the ANS at the present (Bl). 10. When compared the priority of the function of the ANS, it showed that the proportion of HF($38.61{\pm}29.19%$)was the most, and than VLF($30.65{\pm}23.36%$), LF($20.04{\pm}19.13%$) the least. 11. The average of the compensation level of the central nervous system at present(Cl) - was lower than the compensation reserves of the CNS(C2). 12. The average of the control reserves of the cerebrum(D2) - was lower than the control level of the cerebrum at the present (Dl). 13. There was no visible differences between different sexes and ages in pulse rate. 14. The abdomen fat ratio above the line of the insomnia patients was 77.97% in male and 93.1% in female. Both sexes showed that insomnia patients had more abdomen fat that the standard, and female patients had more abd. fat than male patients. Conclusions : This study shows that the HRV of insomnia patients had no significant differences between gender. Fractal portrait, HF, LF and VLF of the insomnia patients are in inverse proportion to the age. The study of the Body Component Analysis showed that female had more abdomen fat than male, and both gender showed more abdomen fat than the standard. When looked into the accompanying symptoms of the insomnia patients, the symptoms show differences according to gender, age and hypnotics taking, as shown as below. In the entire patients, Headache was the most accompanying symptom. Female had more dry mouth, alternative periodic chill and fever, and hot flush symptoms than male. Higher age groups had more dizziness and constipation as accompanying symptoms than lower age groups. Patients who takes hypnotics had more anorexia than those who dont.

• Journal of Embryo Transfer
• /
• v.20 no.3
• /
• pp.255-269
• /
• 2005

This study was aimed to investigate genetic relationships, variables, and correlations between economic traits and metabolic materials in serum components according to bleeding periods and breeding locations for the castrated and not castrated Hanwoo cattle at National Livestock Research Institute. Analysis of variance for serum hormones and metabolic materials showed significant differences by breeding locations except for testosterone and globulin. Statistical differences for serum components were detected by birth year except for cortisol, total protein, globulin and creatinine, and by castration except for total protein and BUN. All the serum components were tended to have sire effects except for testosterone resulting in some degree of additive gene actions. Breeding locations showed statistical significances for carcass weight and back fat thickness, but not in carcass rate, KPH, live weight and transportation weight loss. Effects of breeding locations and castration were significant for all weight measurement periods except for 9 month and 6 month, respectively. A significant sire effect was observed in all weight measurements. Least squared means for concentration of serum components by breeding year, season and castration were not significant. High concentration of cortisol, creatinine and triglyceride and low concentration of IGF-1 and glucose were detected in castrated cattle. Concentration of testosterone with castrated cattle was $5.2\%$ corresponding to non castrated cattle. Estimation of heritabilities of serum components using a sire model with restricted maximum likelihood were ranged 0.07 to 0.58. High heritabilities were estimated for total protein, albumin, globulin, cortisol, creatinine and BUN were 0.53, 0.54, 0.42, 0.45, 0.58 and 0.54, respectively. Low heritabilities were estimated fur calcium, testosterone and IGF-1 for 0.07, 0.15 and 0.12, respectively. Heritabilities for carcass weight, back fat thickness, meat yield index, KPH, and IMF were estimated as 0.39, 0.45, 0.30 0.13, and 0.93. Heritabilities of weights on 18, 12, 9, 6, and 24 month were estimated as 0.78, 0.76, 0.62, 0.58 and 0.58. Estimated heritabilities for average daily gain on 6${\~}$2, 12${\~}$18, and 18${\~}$24 month were 0.80, 0.75 and 0.19, respectively.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.1
• /
• pp.3293-3301
• /
• 1974

An experimental work was conducted by using a laboratory-made model dryer to investigate the effect of the rate of natural forced-air on the drying rate of rough rice which was deposited in the deep-bed. The dryer consisted of 8 cylinderical containers with grain holding screen at their bottoms, each of which having 30cm in diameter and 15cm in height. The containers were sacked vertically with keeping them air-tight by using paper tape during dryer operation. Two separate layers of containers were operated in the same time to have two replications. The moisture contents of grains within each bins after predetermined period of dryer operation were determined indirectly by measuring the weight of the individual containers. The air-rates were maintained at 6 levels, or 5, 8, 10, 15, 18 and 20 millimenters of static head of water. The roomair conditions during dryer operation were maintained in the range of 10-l5$^{\circ}C$ in temperature and 40-60% in relative humidity. The results of the study are summarized as follows: 1. Drying characteristics of the grains in the bottom layers were approximately the same regardless of airdelivery rates, giving the average drying rate as about 0.35 percent per hour after 40-hour drying period, during which moisture content (w. b.) reduced from 24 percent to about 10 percent. 2. After about 40-hour drying period, the mean drying rates increased from 0.163 percent per hour to 0.263 percent per hour as air-flow rates increased from 5mm to 87.16mm of static head of water. In the same time, the moisture differences of grains between lower and upper layers varied from 12.7 percent at the air rate of 5mm of water head to 7.5 percent at the air-flow rate of 20mn of water head. Thus, the greater the air-flow rate was, the more overall improvement in drying performance was. Additionally, from the result of ineffectiveness of drying grain positioned at 70cm depth or above by the air rate of 5mm of static head of water it may be suggested in practical application that the height of grain deposit would be maintained adequately within the limits of air-rates that may be actually delivered. 3. Drying after layer-turning operation was continued for about 30 hours to test the effectiveness of reducing moisture differences in the thick layers. As a result of this layer-turning operation, moisture distribution through layers approached to narrow ranges, giving the moisture range as about 7 percent at air-flow rate of 5mm head of water, about 3 percent at 10mm head about 2 percent at 15mm head, and less than 1 percent at 20mm head. In addition, from the desirable results that drying rate was rapid in the lower layers and dully in the upper layers, layer-turning operation may be very effective in natural air drying with deep-layer grain deposit, especially when the forced air was kept in low rate. 4. Even though the high rate of air delivery is very desirable for deep-layer natural-air drying of rough rice, it can be happened that the required air delivery rate could not be attained because of limitation of power source available on farms. To give a guide line for the practical application, the power required to perform the drying with the specified air rate was analyzed for different sizes of drying bin and is given in Table (5). If a farmer selects a motor of which size is 1 or {{{{1 { 1} over {2 } }}}} H.P. and air-delivery rate which ranges from 8~10mm of head, the diameter of grain bin may be suggested to choose about 2.4m, also power tiller or other moderate size of prime motor may be recommended when the diameter of grain bin is about 5.0m or more for about 120cm grain deposit.

• Korean Journal of Environmental Agriculture
• /
• v.28 no.2
• /
• pp.125-130
• /
• 2009

The aim of this study was to investigate whether differences in the distribution of soil invertebrates among different vegetation types (forest, reservoir, and crop land types) in rural area. A total of 18 orders and 137 species were collected by pitfall traps. Species numbers were the lowest (33 species) at the Chamaecyparis obtusa plantation (St. 6). On the forest sites, the individual number of Hymenoptera was the most abundant, and Acari and Coleoptera was the relatively more abundant than the other sites. On the reservoir sites (Salix chaenomeloides community), the individual number of Collembola was the most abundant, and Diptera was the relatively more abundant than the other sites. On the crop land sites, the individual numbers of Collembola, Hymenoptera, and Araneae were the relatively more abundant than the other orders. The density of Araneae was higher in the reservoir and crop land sites than in the forest sites. From a point of view of biodiversity, although the diversity index(H') was the highest in the mixed broad-leaved forest type (St. 2) with Quercus serrata and Q. acutissima, and the lowest in the upland levee of crop land(St. 11), there was no significant difference among the habitat or vegetation types. According to the community analysis, the soil invertebrates could be divided into 4 groups, the mixed broad-leaved forest type (A group), the plantation or pure forest type (B group), the reservoir type (C group), and the crop land type (D group).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.2
• /
• pp.312-320
• /
• 2005

The purpose of this study was to evaluate the polymerization contraction and the microhardness of compostie resin($Supreme^{(R)}$, Filtek $Flow^{(R)}$, 3M-ESPE, USA) according to irradiation modes of LED curing unit(Elipar $Freelight^{(R)}$, 3M-ESPE, USA). The strain guage method was used for determination of polymerization contraction. Sample were divided by 6 groups according to curing modes and filling method. Group A: $Supreme^{(R)}$, Filtek $Flow^{(R)}$ lining, 10seconds curing, Group B: $Supreme^{(R)}$, Filtek $Flow^{(R)}$ lining, 15seconds curing, Group C: $Supreme^{(R)}$, Filtek $Flow^{(R)}$ lining, 15seconds soft start curing, Group D: $Supreme^{(R)}$ only, 10seconds curing, Group E: $Supreme^{(R)}$ only, 15seconds curing, Group F: $Supreme^{(R)}$ only, 15seconds soft start curing. Preparations of acrylic molds were followed by filling and curing. Strain guage attached to each sample were connected to a strainmeter. Measurements were recorded at each second for the total of 10 minutes including the periods of light application. And microhardness of each group after 24hours from light irradiation were measured. Obtained data were analyzed statistically using Repeated measures ANOVA and Tukey test. The results of the present study are as follows: 1. In flowable resin liner group, soft start curing group was not found decrease of polymerization contraction. But, In Supreme only filling group, the lowest polymeriation contraction was found in soft start curing group. 2. 10 seconds curing group showed statistically significant reduction of polymerization contraction compared with 15 seconds curing group(p<0.05). 3. The microhardness values of each group not revealed significant difference(p>0.05). But, lower surface microhardness was not reached 80% of upper surface microhardness.