• 제목/요약/키워드: B2 phase

검색결과 3,043건 처리시간 0.028초

A Ku-Band 5-Bit Phase Shifter Using Compensation Resistors for Reducing the Insertion Loss Variation

  • Chang, Woo-Jin;Lee, Kyung-Ho
    • ETRI Journal
    • /
    • 제25권1호
    • /
    • pp.19-24
    • /
    • 2003
  • This paper describes the performance of a Ku-band 5-bit monolithic phase shifter with metal semiconductor field effect transistor (MESFET) switches and the implementation of a ceramic packaged phase shifter for phase array antennas. Using compensation resistors reduced the insertion loss variation of the phase shifter. Measurement of the 5-bit phase shifter with a monolithic microwave integrated circuit demonstrated a phase error of less than $7.5{\circ}$ root-mean-square (RMS) and an insertion loss variation of less than 0.9 dB RMS for 13 to 15 GHz. For all 32 states of the developed 5-bit phase shifter, the insertion losses were $8.2{\pm}1.4$dB, the input return losses were higher than 7.7 dB, and the output return losses were higher than 6.8 dB for 13 to 15 GHz. The chip size of the 5- bit monolithic phase shifter with a digital circuit for controlling all five bits was 2.35 mm ${\times}$1.65 mm. The packaged phase shifter demonstrated a phase error of less than $11.3{\circ}$ RMS, measured insertion losses of 12.2 ${\pm}$2.2 dB, and an insertion loss variation of 1.0 dB RMS for 13 to 15 GHz. For all 32 states, the input return losses were higher than 5.0 dB and the output return losses were higher than 6.2 dB for 13 to 15 GHz. The size of the packaged phase shifter was 7.20 mm${\times}$ 6.20 mm.

  • PDF

B2형 규칙(Ni,Co)Al의 상분리와 강도 (Phase Decomposition and Strength of B2-Ordered (Ni,Co)Al)

  • 한창석;김윤채
    • 열처리공학회지
    • /
    • 제9권2호
    • /
    • pp.79-90
    • /
    • 1996
  • Transmission electron microscopy(TEM) investigation on the phase decomposition of B2-ordered (Ni,Co)Al supersaturated with Ni and Co has revealed the precipitation of $(Ni,Co)_2Al$ which has not been expected from the reported equilibrium phase diagram. The $(Ni,Co)_2Al$ phase has a hexagonal struture and takes a rod-like shape with the long axis of the rod parallel to the <111> directions of the B2 matrix. By aging at temperatures below 873 K, a long period Superlattice Structure appears in the hexagonal $(Ni,Co)_2Al$ Phase. The orientation relationship between the $(Ni,Co)_2Al$ Precipitates and the B2-(Ni,Co)Al matrix is found to be$(0001)_p$ // $(111)_{B2}$ and $[\bar{1}2\bar{1}0]_P$ // $[\bar{1}10]_{B2}$, Where the suffix p and B2 denote the $(Ni,Co)_2Al$ precipitate and the B2-(Ni,Co)Al matrix, respectively. (Ni,Co)Al hardens appreciably by the fine precipitation of the $(Ni,Co)_2Al$ phase. Energy dispersive spectroscopy was used to analyze the compositions of each phase formed in B2-(Ni,Co)Al.

  • PDF

$BaO-B_2O_3$계 유리의 상분리 현상과 유리의 구조 (Phase Separation and their Structures in $BaO-B_2O_3$ Glasses)

  • 채수철;김철영
    • 한국세라믹학회지
    • /
    • 제23권6호
    • /
    • pp.25-32
    • /
    • 1986
  • Phase spearated glass is heterogeneous in microscopic point of view and the heterogeneities affect the structures of glasses. In the present work the phase separation of $BaO-B_2O_3$ glass system was investigated and the effect of $P_2O_5$ on the phase separation and crystallization was also studied in the above system. Experiments such as scanning electron microscopy X-ray diffraction and infrared spectroscopy were performed. Phase separation with $B_2O_3$ rich phase matrix and BaO rich phase droplet was observed for the glasses containing less than 6 mole% of BaO while the opposite morphology of phase separation was found for the glasses containing more than 7 mole% of BaO. Phase separation region was extended up to the glass with 22mole% of BaO when the amount of $P_2O_5$ was increased. The heat-treated glasses crystallized to BaO.$4B_2O_3$$P_2O_5$ hindered the glass from the crystalli-zation.

  • PDF

10-GHz band 2 × 2 phased-array radio frequency receiver with 8-bit linear phase control and 15-dB gain control range using 65-nm complementary metal-oxide-semiconductor technology

  • Seon-Ho Han;Bon-Tae Koo
    • ETRI Journal
    • /
    • 제46권4호
    • /
    • pp.708-715
    • /
    • 2024
  • We propose a 10-GHz 2 × 2 phased-array radio frequency (RF) receiver with an 8-bit linear phase and 15-dB gain control range using 65-nm complementary metal-oxide-semiconductor technology. An 8 × 8 phased-array receiver module is implemented using 16 2 × 2 RF phased-array integrated circuits. The receiver chip has four single-to-differential low-noise amplifier and gain-controlled phase-shifter (GCPS) channels, four channel combiners, and a 50-Ω driver. Using a novel complementary bias technique in a phase-shifting core circuit and an equivalent resistance-controlled resistor-inductor-capacitor load, the GCPS based on vector-sum structure increases the phase resolution with weighting-factor controllability, enabling the vector-sum phase-shifting circuit to require a low current and small area due to its small 1.2-V supply. The 2 × 2 phased-array RF receiver chip has a power gain of 21 dB per channel and a 5.7-dB maximum single-channel noise-figure gain. The chip shows 8-bit phase states with a 2.39° root mean-square (RMS) phase error and a 0.4-dB RMS gain error with a 15-dB gain control range for a 2.5° RMS phase error over the 10 to10.5-GHz band.

TiB$_2$-Fe 서메트의 소결성 및 기계적성질에 미치는 Mo첨가의 영향 (Effect of Mo Addition on the Sinterability and Mechanical Properties of TiB$_2$-Fe Cermets)

  • 최덕순
    • 한국세라믹학회지
    • /
    • 제36권5호
    • /
    • pp.471-477
    • /
    • 1999
  • Fe and Fe-Mo binder were used to produce TiB2 based cermet by a pressureless sintering. The densification behaviour of TiB2-Fe-Mo cermet during liquid-phase sintering in argon was studied in relation to binder phase charactertics. The effects of Mo addition and sintering condition on the sintering behaviour and mechanical properties were also investigated. TiB2-based cermets with Fe-Mo binder composition showed a better sinterability than the cermets with only Fe binder. In TiB2-Fe-Mo cermet higher densities in the wide temperature range were obtained and also fully densified sintered cermet were obtained at 1873K The enhancement in the densification phenomenon of TiB2-Fe-Mo system can be explained by improved liquid phase wettability associated with the roles of Mo components as solute atoms. When Fe-Mo binders were used cermets with a finer grain size and enhanced mechanical properties wereproduced and new phases such as Fe2B and Mo2FeB2 were observed in the sintered cermet. The highest bending strength was obtained from the 20vol% Fe-Mo cermet and these hardness-fracture toughness combination in the wide binder compositions is better than that of TiB2-Fe cermet. In order to improve mechanical properties microstructure control with high purity powders is desirable because high purity powders prevent the formation of Fe2B and Mo2FeB2 phase which comsume the ductile binder phase.

  • PDF

Co-sputtering에 의해 증착된 TiNi 박막의 미세조직 및 기계적성질에 미치는 어닐링 열처리 효과 (Effects of Annealing Treatments on Microstructure and Mechanical Property of co-sputtered TiNi Thin Film)

  • 박수대;백창현;홍주화
    • 열처리공학회지
    • /
    • 제21권1호
    • /
    • pp.26-32
    • /
    • 2008
  • Effects of annealing treatment on microstructure and mechanical property of co-sputtered TiNi thin films were studied. As-deposited films showed amorphous state. However, above annealing temperature of $500^{\circ}C$ martensite phase (B19'), precipitate phase ($Ti_2Ni$) and a small amount of parent phase ($B_2$) were present, and phase transformation behaviors were three multi-step phase transformations $B19^{\prime}{\rightarrow}B_2$ and $B_2{\rightarrow}R-phase$ and $R-phase{\rightarrow}B19^{\prime}$. Increase of martensite transformation temperature, increase of microhardness and Young's modulus of TiNi films annealed above $500^{\circ}C$ were discussed in terms of precipitate phase.

B-boy와 K-pop 댄서 중심으로 한 분리 동작의 생체역학적 비교 (Biomechanical Comparison during Isolation Movement in B-boy and K-pop Dancers)

  • 장영관;홍수연;장인영
    • 융합정보논문지
    • /
    • 제7권2호
    • /
    • pp.91-99
    • /
    • 2017
  • 본 연구는 기본동작인 분리(isolation) 동작을 통해 K-pop과 B-boy의 동작의 특성을 생체역학적 변인(CoM, CoM velocity, planar angle, joint moment )중심으로 그 차이점을 규명하는데 목적이 있으며, spss 18.0을 이용하여 독립변인 t검증을 실시하였다. 그 결과 첫째, 국면1과 국면2에서 K-pop 댄서의 CoM 합성변위는 B-boy 보다 더 크게 나타났다(p<.05). 둘째, 국면2와 국면3에서 CoM의 이동속도는 K-pop댄서가 B-boy 보다 더 빠른 것으로 나타났다(p<.05). 셋째, 국면1에서 몸통과 골반의 수평각은 K-pop댄서의 오른쪽 수평각, 국면2와 국면3에서 B-boy의 왼쪽 수평각이 더 큰 것으로 나타났다(p<.05). 넷째, 합성모멘트는 엉덩관절의 국면1에서 B-boy가 더 크게 나타났고, 무릎 관절은 국면2, 국면3, 국면4에서 발목관절은 국면3에서 K-pop 댄서가 더 큰 회전력이 나타났다(p<.05). 따라서 동일한 분리 동작이라 할지라도, K-pop과 B-boy 댄서는 다르게 수행함을 발견하게 되었다.

B세포의 증식에 있어 B-1 임파구와 B-2 임파구의 차이점에 대한 연구 (B-1 Cells Differ from Conventional B (B-2) Cells: Difference in Proliferation)

  • 여승근;조중생;박동춘
    • IMMUNE NETWORK
    • /
    • 제4권3호
    • /
    • pp.155-160
    • /
    • 2004
  • Background: B-1 cells differ from conventional B-2 cells both phenotypically and functionally. The aim of this study was to investigate the difference between peritoneal B-1 cells and splenic B-2 cells in proliferation. Methods: We obtained sorted B-1 cells from peritoneal fluid and B-2 cells from spleens of mice. During the culture of these cells, immunoglobulin secreted into the culture supernatants was evaluated by enzymelinked immunosorbent assay. Entering of S phase in response to LPS-stimuli was measured by proliferative assay. Results: Spontaneous Immunoglobulin M production occurred in peritoneal B-1 cells but not in splenic B-2 cells. LPS stimulated peritoneal B-1 cells secreted IgM at day 1, but splenic B-2 cells at day 2. In thymidine incorporation, peritoneal B-1 cells entered actively S phase after 24hours LPS-stimulation but splenic B-2 cells entered actively S phase after 48 hours. Conclusion: IgM secretion and S phase entering occurred early in peritoneal B-1 cells compared to splenic B-2 cells.

TMA Study on Phase Evolution During Hydrogen-assisted Disproportionation of Nd-Fe-B Alloy

  • Kwon, H.W.;Yu, J.H.
    • Journal of Magnetics
    • /
    • 제16권3호
    • /
    • pp.229-233
    • /
    • 2011
  • Phase evolution during the hydrogen-assisted disproportionation of $Nd_{12.5}Fe_{80.6}B_{6.4}Ga_{0.3}Nb_{0.2}$ alloy was investigated mainly by using a magnetic balance-type thermomagnetic analyser (TMA). In order to avoid any undesirable phase change in the course of heating for TMA, a swift TMA technique with very high heating rate (around 2 min to reach $800^{\circ}C$ from room temperature) was adopted. The hydrided $Nd_{12.5}Fe_{80.6}B_{6.4}Ga_{0.3}Nb_{0.2}$ alloy started to be disproportionated in hydrogen from around $600^{\circ}C$, and the alloy after the early disproportionation (from 600 to $660^{\circ}C$) has been partially disproportionated. The partially disproportionated alloy consisted of a mixture of $NdH_x$, $Fe_3B$, ${\alpha}$-Fe, and the remaining undisproportionated $Nd_2Fe_{14}BH_x$-phase. During the subsequent heating to $800^{\circ}C$ in hydrogen, two additional phases of $Fe_{23}B_6$ and $Fe_2B$ were formed, and the material consisted of a mixture of $NdH_x$, $Fe_{23}B_6$, $Fe_3B$, $Fe_2B$, and ${\alpha}$-Fe phases. During the subsequent isothermal holding at $800^{\circ}C$ for 1 hour, the phase constitution was further changed, and one additional unknown magnetic phase was formed. Eventually, the fully disproportionated $Nd_{12.5}Fe_{80.6}B_{6.4}Ga_{0.3}Nb_{0.2}$ alloy consisted of $NdH_x$, $Fe_{23}B_6$, $Fe_3B$, $Fe_2B$, ${\alpha}$-Fe, and one additional unknown magnetic phase.

$PbO-B_2O_3$ 계 유리의 상분리에 미치는 $P_2O_5$의 영향 (Effect of $P_2O_5$ on the Phase Separation of $PbO-B_2O_3$ Glasses)

  • 최춘식;김철영
    • 한국세라믹학회지
    • /
    • 제22권4호
    • /
    • pp.47-53
    • /
    • 1985
  • Various amount of $P_2O_5$ were added to $PbO-B_2O_3$ binary glass system to investigate its effect on the phase separation and physical properties of the glass. Experiments such as infrared spectroscopy scanning electron microscopy thermal expansion softening point and microhardnesses were done. Phase separation with $B_2O_3$ rich phase matrix and PbO rich phase droplet was observed for the glasses con-taining less than 10m/o of PbO while the opposite morphology of phase separation for the glasses containing more than 11m/o of PbO. By adding increasing amount of $P_2O_5$ their phase separation region was extended to the glass containing more than 20m/o of PbO. These effects can be interpreted in terms of the inoic field strength difference of each ions in the glasses. The abrupt changes of physical properties such as softening point thermal expansion and microhardness were observed for the glass with around 10m/o of PbO in this system. These changes are by the matrix composition change from TEX>$B_2O_3$ rich phase to PbO rich phase depending on PbO concentration.

  • PDF