• Journal of the Korean Wood Science and Technology
• /
• v.45 no.6
• /
• pp.872-882
• /
• 2017

The objective of this study was to evaluate the properties of bamboo oriented strand board (B-OSB) from andong (Gigantochloa psedoarundinacea) and betung (Dendrocalamus asper) with and without steam treatment. Strands were steam-treated at $126^{\circ}C$ for 1 h under 0.14 MPa pressure. The extractive content of bamboo strands before and after steam treatment were determined according to a standard (TAPPI T 204 om-88). Three-layer B-OSB with the core layer perpendicular to the surface and back layers were formed and binded with 8% of phenol formaldehyde (PF) resin with the addition of 1% of wax. The evaluation of physical and mechanical properties of the boards were conducted in accordance with the JIS A 5908:2003 standard. The results showed that steam treatment of bamboo strands significantly reduced the extractive content. Steam treatment tended to increase the dimensional stability and mechanical properties of B-OSB from andong and betung. The results showed that the dimensional stability and bending strength of B-OSB from betung was higher than those of andong. The internal bond strength of B-OSB from andong was higher than betung owing to a greater amount of extractives dissolved during the steam treatment.

• Journal of the Korean earth science society
• /
• v.29 no.6
• /
• pp.454-465
• /
• 2008

Benthic foraminiferal assemblage and AMS radiocarbon dating of core sediments from the northern shelf of the East China Sea were analyzed in order to understand the paleoenvironment and sedimentary environmental changes around the Korean marginal seas since the last glacial maximum (LGM). The core sediments, containing continuous records of the last 16,000 years, reveal a series of well-defined vertical changes in number of species (S), P/T ratio and species diversity (H) as well as foraminiferal assemblage. Such down-core variations display a sharp change at a core depth of approximately 240 cm, which corresponds to ca. 10,000 year B.P. The sediments of the lower part of the core (240${\sim}$560 cm, Zone I), including the well-developed tide-influenced sedimentary structures, are characterized by high abundances of Ammonia beccarii and Elphidium clavatum (s.l.) and low values in number of species, P/T ratio and diversity. These tide-influenced signatures and foraminiferal assemblage characters suggest that the sediments of Zone I were deposited in a coastal environment (water depths of 20${\sim}$30 m) such as tidal estuary with an influence of the paleo-rivers (e.g., old-Huanghe and Yangtze rivers) during the early phase of the sea-level rise (ca. 16,000 to 10,000 years) since the LGM. In contrast, the upper core sediments (0${\sim}$240 cm, Zone II) are characterized by abundant Eilohedra nipponica and Bolivina robusta with a minor contribution of A. ketienziensis angulata and B. marginata. and high values in number of species, P/T ratio and diversity. Based on relative abundance of these assemblage, Zone II can be divided into two subzones (IIa and IIb). Zone IIa is interpreted to be deposited under the inner-to-middle shelf environment during the marine transgression in the early Holocene (after ca. 9,000 yr B.P.) when sea level rapidly increased. The sediments of zone IIb most likely deposited after 6,000 yr B.P. under the outer shelf environment (80${\sim}$100 m water depth), which is similar to modem depositional environments. The muddy sediments of zone IIb were probably transported from the old-Huanghe and Yangtze Rivers during the late Holocene. We suggest that the present-day oceanographic conditions over the Yellow and the East China Seas have been established after ca. 7,000${\sim}$6,000 yr B.P. when the Kuroshio Current began to influence this area.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.11
• /
• pp.1529-1539
• /
• 2012

A whole genome association (WGA) study was performed to detect significant polymorphisms for meat quality traits in an $F_2$ cross population (N = 478) that were generated with Korean native pig sires and Landrace dams in National Livestock Research Institute, Songwhan, Korea. The animals were genotyped using Illumina porcine 60k SNP beadchips, in which a set of 46,865 SNPs were available for the WGA analyses on ten carcass quality traits; live weight, crude protein, crude lipids, crude ash, water holding capacity, drip loss, shear force, CIE L, CIE a and CIE b. Phenotypes were regressed on additive and dominance effects for each SNP using a simple linear regression model, after adjusting for sex, sire and slaughter stage as fixed effects. With the significant SNPs for each trait (p<0.001), a stepwise regression procedure was applied to determine the best set of SNPs with the additive and/or dominance effects. A total of 106 SNPs, or quantitative trait loci (QTL) were detected, and about 32 to 66% of the total phenotypic variation was explained by the significant SNPs for each trait. The QTL were identified in most porcine chromosomes (SSCs), in which majority of the QTL were detected in SSCs 1, 2, 12, 13, 14 and 16. Several QTL clusters were identified on SSCs 12, 16 and 17, and a cluster of QTL influencing crude protein, crude lipid, drip loss, shear force, CIE a and CIE b were located between 20 and 29 Mb of SSC12. A pleiotropic QTL for drip loss, CIE L and CIE b was also detected on SSC16. These QTL need to be validated in commercial pig populations for genetic improvement in meat quality via marker-assisted selection.

• Journal of the Korean Magnetics Society
• /
• v.14 no.5
• /
• pp.186-191
• /
• 2004

The variation of magnetic properties with insulating materials(glass frits, talc and polyamide) in compressed powder cores composed of Fe$\sub$73.5/Cu$_1$Nb$_3$Si$\sub$15.5/B$\sub$7/ nanocrystalline alloy powders(size: 250～850 $\mu\textrm{m}$) and 3 wt% insulators has been investigated. Larger permeability was obtained at the frequency lower than 300～400 kHz for the powder cores including ceramic insulators(glass frits and talc) as compared to the cores with polyamide, while at higher frequency than 1 MHz the permeability of the former cores decreased rapidly. Further the cores with ceramic insulators showed larger core loss and smaller peak quality factor attained at lower frequency. On the contrary, the powder cores with polyamide exhibited high stability of permeabilities up to several MHz and superior core-loss and quality-factor properties. Moreover the dc bias property was better in the wide field range for the cores having polyamide. The enhanced magnetic properties of polyamide-added cores were attributed to the more sufficient electrical insulation between magnetic particles, where the higher insulation state was considered to be obtained from the larger volume fraction of polyamide in the powder cores.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1015-1022
• /
• 2023

In this paper, we propose DLP(Dual Linear Polarization) antenna with aperture coupled feeding structure for private network. The proposed antenna has general aperture coupled structure and design two port between top and bottom layer to obtain the enhanced isolation. Also, The size of each substrate(top and bottom layer) is 34.0 mm(W)×34.0 mm(L), which is designed on the FR-4 substrate which thickness (h) is 1.0 mm, and the dielectric constant is 4.4. Also, the size of patch antenna is 12.70 mm(W2)×14.60 mm(L3), and it is located on the top layer. The size of feeding line is 24.0 mm(W2)×1.6 mm(L3), and is located at the bottom layer Also, rectangular slot is located on the ground plane between top layer and bottom layer. From the fabrication and measurement results, bandwidths of 300 MHz (4.52 to 4.82 GHz) for feeding port 1, and 170 MHz (4.65 to 4.82 GHz) for feeding port 2 are obtained on the basis of -10 dB return loss and transmission coefficient S21 is got under the -30 dB. Also, cross polarization isolation between each feeding port obtained

• Tuberculosis and Respiratory Diseases
• /
• v.52 no.2
• /
• pp.128-136
• /
• 2002

Background: There are few studies that have reported on the pharmacokinetic(PK) disposition of fluoroquinolones in patients with multi-drug resistant tuberculosis(MDR-Tb), even though fluoroquinolones are frequently co-prescribed to those patients. In this study, the PK disposition of ofloxacin, a fluoroquinolone, was evaluated in patients with MD R -Tb. Methods: Twenty patients with MDR-Tb were given 2nd line Tb drugs including ofloxacin (300mg twice a day), prothionamide, cycloserine, para-aminosalicylic acid, kanamycin, and streptomycin. The patients were grouped according to their body mass index(BMI) as an index of emaciation (group A : 18.5$\leq$BMI <23, group B : BMI < 18.5). Blood samples were serially drawn and urine samples were collected upto 24 hours after the last dose of those drugs at steady state (over 1 month). The ofloxacin concentrations were determined using HPLC (High Performance Liquid Chromatography). Results: The AUC of ofloxacin in group B was greater than that in group A ($31.4{\pm}8.9{\mu}g/ml{\cdot}h$ vs. $24.1{\pm}6.2{\mu}g/ml{\cdot}h$)(Check the symbols), (p<0.05). The total clearance(Cl/F) of ofloxacin was $0.16{\pm}0.03$ L/h/kg in group A, and $0.14{\pm}0.03$ L/h/kg in group B. The half-lives of ofloxacin in two groups were similar (group A : $5.3{\pm}0.8$ hours, group B : $5.7{\pm}0.9$ hours). In addition, the other PK parameters in two groups were also similar. Conclusions: The pharmacokinetics of ofloxacin in patients with MDR-Tb appears to be comparable with those of normal subjects, and the extent of emaciation appears to have an influence on the pharmacokinetics of ofloxaicn in chronic debilitated MDR-Tb patients.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.5
• /
• pp.605-612
• /
• 2000

Four young swamp buffalo cows of similar age ranging in weight between 280 to 380 kg and trained to do physical work were used in a study to determine energy and protein requirements for draught using a $4{\times}4$ Latin square designed experiment. The experiment consisted of field trials employing 4 levels of work load, e.g. no work as control, and loads amounting 450 to 500 Newton (N) pulled continuously for 1, 2 and 3 h daily for 14 consecutive days. Cows were fed king grass (Penisetum purpuroides) ad libitum and were subjected to materials balance trials. Body composition was estimated in vivo by the body density method and daily energy expenditure (EE) was calculated from ME minus retained energy (RE). The results show that EE while not working ($EE_{resting}$) was $0.42kgW^{0.75}MJ/d$ and maintenance ME ($ME_m$) was $0.37kgW^{0.75}MJ/d$. ME requirement increased to 1.65 times maintenance for the work of 3 hours. The energy expended for doing exercise ($E_{exercise}$) was 9.56, 20.0 and 25.86 MJ/cow for treatments 1, 2 and 3 II, respectively. Fat retention was absent in all groups of working cows, but protein retention was only negative for cows undertaking 3 h work. The relationship between $E_{exercise}$ (MJ), work load (F, kN), work duration (t, h) and body mass (W, kg) was found to be: $E_{exercise}=(0.003F^{1.43}t^{0.93})/W^{0.09}MJ$. The maintenance requirement for digestible protein was $2.51kgW^{0.75}g/d$, whereas digestible protein for growth ($DP_{growth}$) and for work ($DP_{work}$) followed the equations: $DP_{growth}=[(258+1.25W^{0.75}){\Delta}Wkg/d]g$ and $DP_{work}=[12.59e^{0.95t}]g$, respectively The coefficients a, b and c for the calculation of $E_{exercise}$ components according to the Lawrence equation were found to be 2.56 J/kgW.m, 5.2 J/kg load carried.m and 0.29, respectively, thus efficiencies to convert ME into work were 0, 16.09, 27.3 and 32.44% for control, 1, 2 and 3 h/d work, respectively. ME and DP requirements for a 250 to 400 kg working buffalo cow allowing to growth up to 0.5 kg/d are presented.

• Applied Biological Chemistry
• /
• v.41 no.5
• /
• pp.390-394
• /
• 1998

The tuber of Liriope platyphylla was extracted with 80% aqueous MeOH and solvent-fractionated with EtOAc, n-BuOH and $H_2O$. Evaluation of growth inhibitory activity of each fractions on various carcinoma cells, A549, SK-OV-3, SK-Mel-2, XF-498 and HCT-15, indicated the n-BuOH fraction to be the highest in the activity. From the fraction, two saponin compounds were isolated through Amberlite XAD-II and silica gel column chromatographies, repeatedly, and their chemical structures were elucidated as spicatoside A and B by interpretation of spectral data, NMR and IR, and adaptation of acid hydrolysis. Spicatoside A showed growth inhibitory activity on carcinoma cells, and the $IC_{50}$ values against A549, SK-OV-3, SK-Mel-2, XF-498 and HCT-15 cells were determined to be 17.3, 21.7, 14.9, 18.8 and $15.6\;{\mu}g/ml$, respectively.

• Journal of Animal Science and Technology
• /
• v.48 no.2
• /
• pp.293-306
• /
• 2006

We characterized physicochemical properties and examined the organoleptic and textural evaluations of Feta cheese made from goat's milk. Nutritional compositions of goat Feta cheese were fat 23.50%, protein 11.03% with moisture content of 59.54%. Cell numbers of lactic starter cultures in Feta cheese maintained from log 8.46 CFU/g and pH 5.76 during storage at 4℃ for 14 day's aging. The color of Feta cheese was whitish (L. 93.19) at after finishing brine salting, but became a little yellowish(b. 3.52) (a. -0.71). For texture profile analysis of goat Feta cheese, hardness, fracturability springness, and cohesiveness seemed to be week, but adhesiveness gumminess, chewiness, and resilience were enhanced as aging times extended to 14days, resulted in the overall textural properties was to be superior to control cheese(commercial Mozzarella cheese). Organoleptic evaluations were examined based on the intensities and the preferences for flavour, tastes, texture and mouth feeling. saltiness, bitterness and acidity were stronger in the intensities than control cheese, but the preferences were enhanced by aging to be better than control cheese at 14 days and later on, however, the texture changed to be weaker in hardness and unpleasant in mouthfeel. The fatty acid compositions of Feta cheese analysed by Gas chromatography were saturated fatty acid 42.06%, monoenoic acids 29.67%, di-enoic acids 24.24%, tri-enoic acids 1.21%.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.11
• /
• pp.1540-1547
• /
• 2014

The accuracy of genomic estimated breeding values (GEBV) was evaluated for sixteen meat quality traits in a Berkshire population (n = 1,191) that was collected from Dasan breeding farm, Namwon, Korea. The animals were genotyped with the Illumina porcine 62 K single nucleotide polymorphism (SNP) bead chips, in which a set of 36,605 SNPs were available after quality control tests. Two methods were applied to evaluate GEBV accuracies, i.e. genome based linear unbiased prediction method (GBLUP) and Bayes B, using ASREML 3.0 and Gensel 4.0 software, respectively. The traits composed different sets of training (both genotypes and phenotypes) and testing (genotypes only) data. Under the GBLUP model, the GEBV accuracies for the training data ranged from $0.42{\pm}0.08$ for collagen to $0.75{\pm}0.02$ for water holding capacity with an average of $0.65{\pm}0.04$ across all the traits. Under the Bayes B model, the GEBV accuracy ranged from $0.10{\pm}0.14$ for National Pork Producers Council (NPCC) marbling score to $0.76{\pm}0.04$ for drip loss, with an average of $0.49{\pm}0.10$. For the testing samples, the GEBV accuracy had an average of $0.46{\pm}0.10$ under the GBLUP model, ranging from $0.20{\pm}0.18$ for protein to $0.65{\pm}0.06$ for drip loss. Under the Bayes B model, the GEBV accuracy ranged from $0.04{\pm}0.09$ for NPCC marbling score to $0.72{\pm}0.05$ for drip loss with an average of $0.38{\pm}0.13$. The GEBV accuracy increased with the size of the training data and heritability. In general, the GEBV accuracies under the Bayes B model were lower than under the GBLUP model, especially when the training sample size was small. Our results suggest that a much greater training sample size is needed to get better GEBV accuracies for the testing samples.