• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제20권3호
• /
• pp.191-200
• /
• 1998

This study was intended to perform the influence of condyle positional change after surgical correction of skeletal Class III malocclusion after orthognathic surgery in 37 patients(male 13, female 24) using computed tomogram that were taken in centric occlusion before, immediate after, and long term after surgery and lateral cephalogram that were taken in centric occlusion before, 7 days within the period of intermaxillary fixation, at the 24 hours later removing intermaxillary fixation and long term after surgery. 1. Mean intercondylar distance was $84.42{\pm}5.30mm$ and horizontal long axis of condylar angle was $12.79{\pm}4.92^{\circ}$ on the right, $13.53{\pm}5.56^{\circ}$ on the left side. Condylar lateral poles were located about 12mm and medial poles about 7mm away from the reference line(AA') on the axial tomogram. Mean intercondylar distance was $83.15{\pm}4.62mm$ and vertical axis angle of condylar angle was $76.28{\pm}428^{\circ}$ on the right, $78.30{\pm}3.79^{\circ}$ on the left. 2. In amount of set back, We found the condylar change(T2C-T1C) which had increasing tendency in group III (amount of setback : 10-15mm). but there was no statistical significance(p>0.05). 3. There was some correlation between condylar change(T2C-T1C) and TMJ dysfunction. It seemed that postoperative condylar change had influenced postoperative TMJ dysfunction, through there was no statistical significance (p>0.05). As we have observed the change of condylar axis in the group that complained of TMJ dysfunction in cases of large amount of mandibular setback. So we consider that the more trying to conserve condylar position will decrease occurrence rate of post operational TMJ dysfunction.

• Korean Journal of Food Science and Technology
• /
• 제47권1호
• /
• pp.56-62
• /
• 2015

Various pretreatment methods were evaluated to prevent tissue softening of heated onion. Changes in onion tissue firmness during heating were explained by 3-mechanism model consisting of texture hardening at low temperature ($60-80^{\circ}C$) and substrate softening at high temperature. Preheating of onion in a $Ca^{2+}$-containing solution significantly improved its texture after high-temperature heating. The improvement of firmness by preheating at low temperature was related to the formation of strong cross-linking between carboxyl groups and $Ca^{2+}$ by the action of pectin methylesterase in onion. The highest firmness was obtained by pre-heating at $70^{\circ}C$ for 120 min in 0.5% calcium solution. This result was supported by chemical analysis showing that the amount of bound calcium was the highest at $70^{\circ}C$. Further investigation should be carried out to establish the optimal conditions to prevent the softening of various vegetables.

• Korean Journal of Soil Science and Fertilizer
• /
• 제32권1호
• /
• pp.76-83
• /
• 1999

Studies were conducted during 2 months from May of 1997 to evaluate the effects of pig manure compost(PMC) on soil microbial flora. To do so, a field experiment of Chinese cabbage(Brassica campestris L.) was conducted in a randomized block design on a sandy loam soil and microbial floral characteristics in soils were analyzed. Treatments to control included the application of PMC at (A) $8Mg\;ha^{-1}$CM-8), (B) $29Mg\;ha^{-1}$(CM-2,9), and (C) $57Mg\;ha^{-1}$(CM-57), and of chemical fertilizer(D) at $320N-80P_2O_5-200K_2O\;kg\;ha^{-1}$(NPK). In each treatment, the rhizosphere and non-rhizosphere soils were tested for the analysis of microbial populations. The populations of bacteria, actinomycetes, and fungi increased in soils with the applications of PMC and chemical fertilizer, but that of Bacillus sp. decreased. However, the population of fluorescent Pseudomonas sp. was reduced in NPK plots only. With increasing application rates of PMC, the number of colony forming units(cfu) of bacteria (Pseudomonas sp. and actinomycetes) and fungi increased. in all PMC-treated plots, the population density peaked at early growth stage for bacteria(including Bacillus sp.), at late growth for fluorscent Pseudomonas sp., and at harvest for fungi and actinomycetes. The rhizosphere effect was greatest for fluorscent Pseudomonas sp. As the application rates of PMC increased, Total N, organic matter, available phosphate, and exchangeable -K, -Ca, and -Mg increased compared to control, but soil pH was lowered. In NPK plots, EC was 3.4-fold and exchangeable K was 5-fold higher than control.

• Food Science and Preservation
• /
• 제21권6호
• /
• pp.790-798
• /
• 2014

The nutritional compositions and antioxidative activities of the Kimcheon lowbush and Pyungtaek highbush blueberries cultivated in South Korea were investigated. The approximate compositions, pH, and soluble-solid and mineral contents of P, Ca, Mg, Na, and Zn were determined. Both blueberry cultivars had mainly fructose and glucose as free sugars while disaccharides such as sucrose, maltose, and lactose were not detected in both. Oleic, linoleic, and linolenic fatty acids were the major fatty acids in both types of blueberries. The total of 16 free amino acids, including seven essential and nine non-essential amino acids, were higher in the Pyungtaek highbush blueberry. Among the amino acids, arginine was especially much higher in the Pyungtaek highbush blueberry. The anthocyanin, resveratrol, and polyphenol compounds, which are the important biologically active compounds in blueberries, were found. The anthocyanin contents of the Kimcheon lowbush and Pyungtaek highbush blueberries were 22.0 and 18.1 mg/100 g, respectively; the resveratrol contents by HPLC, 0.12 and 0.11 mg/100 g; and the total polyphenol contents, 141.3 and 138.4 mg/100 g. The electron-donating ability determined based on the DPPH radical scavenging activity was increased in a concentration-dependent manner, and it was higher than that of the Pyungtaek highbush blueberries, which implies that it is highly correlated with the higher amounts of total polyphenol, anthocyanin, and resveratrol in it. In conclusion, the two varieties of Korean blueberries can be suggested as potential sources of high-value-added functional foods.

• Journal of The Korean Society of Grassland and Forage Science
• /
• 제19권1호
• /
• pp.1-10
• /
• 1999

To find out the way to be able to prolong the grazing years of mixed pasture under Cheju summer-hot weather, an experiment designed with split plot (main plot : 3 cutting-plant height such as 15cm, 30cm and 45cm and sub plot : 4 white clover varieties such as Regal, Tahora, Brown and SRVR) was carried out at Cheju Agricultural Experiment Station during the period from Sept. 1994 to Oct. 1996 Dry matter yield in 15cm plant height in cutting dates has shown significantly lower increase than those in 30 and 45cm(P<0.05). There was highiy significant increase in dry matter yield of Brown plot when compared with other varieties of white clover in 2nd year(P<0.01). There was no difference on botanical composition of mixed sward as affected by plant height in cuttings dates in 2nd year. The percentage of white clover tends to lower in white clover varieties Brown and SRVR when compared with Regal and Tahora. The rate of weed was not affected by plant height in cutting dates and white clover variety in mixed pasture at last cutting time of 2nd year. In 15cm plant height, concentration of ADE and NDF was the lowest one while P contents was the highest one(P<0.01). Potassium contents was the lowest one in 30cm plant cutting height(P<0.05), and nitrogen showed statistically interaction between plant cutting height and white clover variety(P<0.01). White clover variety was no effective on concentration of constituents in mixed pastures. In conclusion, white clover variety SRVR harvested at 15cm plant height is effective on nutrient value of pasture and balance of grass and white clover in botanical composition.

• Journal of Animal Environmental Science
• /
• 제13권2호
• /
• pp.113-120
• /
• 2007

This study was conducted to measure Nitrogen(N), Phosphate($P_2O_5$), Potassium ($K_2O$), Organic matter(OM) and Moisture content of liquid pig manure by Near Infrared Spectroscopy(NIRS) and to develop an alternative and analytical instrument which are used for measurement of N, $P_2O_5$, $K_2O$, OM, and Moisture contents for liquid pig manure. The liquid pig manure sample's transmittance spectra were measured with a NIRS in the wavelength range of 400 to 2,500 nm. Multiple linear regression and partial least square regression were used for calibrations. The correlation coefficient(RSQ) and standard error of calibration(SEC) obtained for nitrogen were 0.9190 and 2.1649, respectively. The RSQ for phosphate, potassium, organic matter and moisture contents were 0.9749, 0.5046, 0.9883 and 0.9777, and the SEC were 0.5019, 1.9252, 0.1180 and 0.0789, respectively. These results are indications of the rapid determination of components of liquid pig manure through the NIR analysis. The simple analytical instrument for liquid pig manure consisted of a tungsten halogen lamp for light source, a sample holder, a quartz cell, a SM 301 spectrometer for spectrum analyzer, a power supply, an electronics, a computer and a software. Results showed that the simple analytical instrument that was developed can approximately predict the phosphate, organic matter and moisture content of the liquid pig manure when compared to the analysis taken by NIRS. The low predictability value of potassium however, needs further investigation. Generally, the experiment proved that the simple analytical instrument was reliable, feasible and practical for analyzing liquid pig manure.

• Korean Journal of Poultry Science
• /
• 제36권1호
• /
• pp.15-21
• /
• 2009

A 10-wk layer feeding trial was conducted to investigate the effects of high quality corn distiller's dried grains with solubles (DDGS) on performance, egg qualities, and yolk fatty acid composition. The economics of using DDGS in the Korean situation was also analyzed. A total of 216 Hy-line Brown layers, 23-wk of age, were employed in this trial consisting of three dietary treatments (0%, 10%, and 20% DDGS), and six replicates per treatment. All experimental diets were prepared as iso-protein (17%) and iso-calorie (2,780 kcal/kg). The use of DDGS up to 20% in layer diets did not affect the feed intake, laying rate, egg weight, and feed conversion ratio (P>0.05). At 5th and 10th wk of the trial, the eggshell color, albumen height, and Haugh unit were not influenced by the DDGS supplementation. At 5th wk of the trial, the eggshell qualities, like eggshell weight, eggshell thickness, and eggshell strength, were not affected by the DDGS feeding; however, these eggshell qualities were decreased at 10th wk due to the 20% DDGS feeding (P<0.05). Yolk color of DDGS 20% increased compared to DDGS 0% at 5th and 10th wk of the trial (P<0.05). At 10th wk, yolk/egg ratio of DDGS 20% decreased compared to DDGS 0% (P<0.05). The yolk fat content was not changed due to DDGS feeding. The monounsaturated fatty acid content of yolk decreased linearly by feeding DDGS (P<0.05). The yolk polyunsaturated fatty acid content of DDGS 20% increased significantly compared to DDGS 0%. The DDGS feeding was not found to affect the degree of yolk fat unsaturation. The cost of feed (￦/kg feed) decreased as the level of DDGS increased. The production costs of egg (￦/kg egg) were cheap in the order of DDGS 10%, DDGS 20%, and DDGS 0%, indicating that DDGS is a viable alternative feed ingredient to corn and soybean meal. In conclusion, high quality DDGS ($L^*$ 61.72) could be used economically up to 20% level without any harmful effect on laying performance: however, the use of DDGS up to 10% is more economical than DDGS 20%.

• Korean Journal of Poultry Science
• /
• 제36권1호
• /
• pp.23-28
• /
• 2009

The experiment were protein and metabolizable energy level in performance and carcass rate in cross bred chicks. One day old, 720 male and female cross bred chick were used for the experiments, and 20 chicks were placed at each pen. The energy level of feed was maintained about 2,950, 3,000, 3,050 kcal/kg, and protein content was adjusted about 19, 20, 21% from 0 to 5 weeks and energy level was maintained about 3,100, 3,150, 3,200 kcal/kg, and protein content was adjusted about 17, 18, 19% from the 6 to 10 weeks old of the experiment. At the whole time, ME 3,100 (2,950), 3,150 (3,000) and 3,200 (3,050) kcal/kg treatment groups was not significant difference in weight gain, feed intake, but 3,150 (3,000), 3,200 (3,050) kcal/kg treated groups revealed to show improved feed conversion rate than the group treated with ME 3,100 (2,950) kcal (P<0.05). And CP 17 (19), 18 (20), 19 (21)% treatment groups did not significant difference weight gain and feed intake but CP 19 (21)% treated group wan significant difference feed conversion rate than the CP 17 (19)% treated group (P<0.05). ME level of 3,100 (2,950), 3,150 (3,000), 3,200 (3,050) kcal/kg treatment groups in carcass rate and abdominal fat rate was not signficant difference and protein of 17 (19), 18 (20), 19 (21)% treatment groups after end of experiment. Between ME and CP of dietary was significant appeared to interact at 6~10 weeks (P<0.05).

• Journal of The Korean Society of Grassland and Forage Science
• /
• 제6권2호
• /
• pp.78-83
• /
• 1986

This experiment was carried out in order to study the effect of cutting time on the regrowth and the feed composition in native reed. The first growth crops cut in June, July and October and the ratoon crops after cutting cut in October. The samples measured the plant height, leaf blade & sheath-stem ratio, grass yield, feed composition and invitro dry matter digestibility. The results are summarized as follow: 1. As the result of the grass productivity and nutrient yield, it was indicated that suitable cutting time of the native reed was from middle of June to middle of July. The yield of dry matter and in vitro digestible dry matter were much more in the first crops than in the ratoon crops in both of non-fertilizer and fertilizer(P < 0.01), and more in the fertilizer than in non-fertilizer in both of the first and ratoon crops(P < 0.01). 2. The contents of feed composition in native reed of non-fertilizer and fertilizer showed different trends between the first and ratoon crops. In case of the first crops, the contents of C. protein and C.fat were higher in fertilizer than in non-fertilizer and the contents of C. fiber, NDF and ADF were lower in fertilizer than in non-fertilizer, but these contents were not significantly different between non-fertilizer and fertilizer. In the ratoon crops, these contents between non-fertilizer and fertilizer were shown in a opposite manner to those in the first crops.

• Journal of Biomedical Engineering Research
• /
• 제25권3호
• /
• pp.171-182
• /
• 2004

This study investigates the biomechanical efficacies of vertebroplasty which is used to treat vertebral body fracture with bone cement augmentation for osteoporotic patients using image and finite element analysis. Simulated models were divided into two groups: (a) a vertebral body, (b) a functional spinal unit(FSU). For a vertebral body model, the maximum axial displacement was investigated under axial compression to evaluate the effect of structural integrity. The stiffness of each FE model simulated was normalized by the stiffness of intact model. In the case of FSU model, 3 types of compression fractures were formulated to assess the influence on spinal curvature changes. The FSU models were loaded under compressive pressure to calculate the change of spinal curvature. The results according to the various factors suggest that vertebroplasty has the biomechanical efficacy of the increment of structural reinforcement in a patient who has relatively high level of BMD and a patient with the amount of 15％, PMMA injection of the cancellous bone volume. The spinal curvatures after compression fracture simulation vary from 9$^{\circ}$ to 17$^{\circ}$ of kyphosis compared to that the spinal curvature of normal model was -2.8$^{\circ}$ of lordosis. These spinal curvature changes cause the severe spinal deformity under the same loading. As the degree of compressive fracture increases the spinal deformity also increases. The results indicate that vertebroplasty has the increasing effect of the structural integrity regardless of the amount of PMMA or BMD and the restoration of decreased vertebral body height may be an important factor when the compressive fracture caused the significant height loss of vertebral body.