• Journal of Powder Materials
• /
• v.6 no.4
• /
• pp.270-276
• /
• 1999

Ti-Ni-Cu alloy powders were fabricated by ball milling, and the properties of these powders were characterized. Mixed 50Ti-(50-x)Ni-xCu powders of 5 to 10at.%Cu composition were milled for 100 hours using SUS 1/4" balls in argon atmosphere. Ball to powder ratio was 20:1 and rotating speed was 100 rpm. Tensile strength, microstructure and phase transformation of ball milled Ti-(50-x)Ni-xCu powders were studied. After 100 hours milling, Ti, Ni and Cu elements were alloyed completely and an amorphous phase was formed. Amorphous phase was crystallized to martensite(B 19') and austenite(B2) after heat treatment for 1 hour at $850^{\circ}C$. As the Cu contents were increased, tensile strength of extruded 6061Al/TiNiCu was decreased, and B19'martensite phases In the TiNi particles were the causes of high tensile stress of extruded 6061Al/TiNiCu.NiCu.

• Herbal Formula Science
• /
• v.19 no.2
• /
• pp.83-92
• /
• 2011

Objectives : This study was carried out to moniter microbial flora on freeze-dried herbal powder and identify isolated bacteria. Methods : We measured the total number of bacteria and fungi in 29 herbal powder which had made according to the guideline of KFDA. For the identification, we observed microscopic properties and carried out polymerase chain reaction(PCR). The purified DNA was analyzed by DNA sequencer. Results : Among the 29 herbal powders, the fungi were detected only one sample as unacceptable range of total aerobic bacteria. Isolated bacteria were identified as Bacillus cereus, B. subtilis, B. megaterium, B. licheniformis, Erwinia tasmaniensis, E. amylovora, and Pantoea agglomerans by 16S rDNA analysis. E. tasmaniensis was observed 20 herbal samples. Conclusions : According to above results, further studies for the effective sterilization of low herbal materials should be needed.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.687-689
• /
• 1995

Our team works on mixture of hard magnetic materials. As hard magnetic material we used mixture of powders: melt-spun ribbon Nd-Fe-B, ferrite and Alnico. Their different mixtures are basic material for dielectromagnets under our investigation. Main disadvantage of dielectromagnets with Nd-Fe-B alloy powder as a component is a low corrosion resistance. Protection against corrosion is covering dielectromagnets with metallic or organic coating film. The coating film protects dielectromagnets from free particles on the surface and low resistance for mechanical stresses too. The surface of dielectromagnets prepared from mixture of powders if formed by metallic particles - powder of Nd-Fe-B and Alnico, particles of oxide - powder of ferrite and particles of resin - bonding materials. Team work on technology of laying the metallic coating on dielectromagnets prepared from mixture of mentioned powders. Papers show the results of initial investigation on metallic coating technology. It shows influence of type and used technology of the metallic coating film on magnetic properties of dielectromagnets.

• Korean journal of food and cookery science
• /
• v.18 no.6
• /
• pp.632-636
• /
• 2002

Mulberry leaves noodles were prepared with composite flour by the addition of various levels of mulberry leaves powder of 100 mesh particle site. The characteristics of cooked noodle including color, texture, cooking properties were measured, and sensory evaluation was performed. The L and a values of cooked noodle decreased as more wheat flour was substiruted with mulberry leaves powder. And the b value of noodle containing mulberry leaves powder was higher than control, but b value did not increase as the ratio of powder increased. The increase in cooking weight and volume was greater with cooked noodles of higher content of mulberry leaves powder. The turbidity of soup and eluted solid content increased as the content of powder increased, indicating higher cooking loss. There was not much difference in hardness among cooked noodles, but cohesiveness and springiness decreased as the ratio of mulberry leaves powder increased, while adhesiveness increased. The results of sensory evaluation showed that cooked noodles containing 4% and 6% mulberry leaves powder were acceptable as much as wheat four noodle in terms of color, texture, taste and flavor. But the overall acceptability of mulberry leaves noodle was lower than wheat now noodle.

• The Korean Journal of Food And Nutrition
• /
• v.20 no.4
• /
• pp.392-398
• /
• 2007

In this study we investigated the physical and sensory characteristics of sponge cakes prepared with different levels(0, 2, 4, 6, 8 and 10%) of freeze-dried steamed garlic and Yuza(Citrus junos Sieb ex Tanaka) powder, combined at the same ratio. The cake height and specific loaf volume were highest in the 4% steamed garlic and Yuza powder group. Moisture contents were significantly higher in the 2 and 4% steamed garlic and Yuza powder groups than in the other groups. With increasing steamed garlic and Yuza powder content, the L- and b-values of the crust decreased, but the a-value increased, when compared to the control group. The L-value of the crumb was insignificant within each group. Compared to the a-value of the $0{\sim}2%$ added groups, the a-value of the $4{\sim}10%$ added groups, increased with increasing steamed garlic and Yuza powder contents. However the b-value decreased in the 8 and 10% steamed garlic and Yuza powder groups. The hardness and chewiness of the $6{\sim}10%$ added groups, and the gumminess of the 10% addition group, were significantly higher than in the control group. The results of the sensory evaluation showed there were not significant differences amoung the groups, except for moistness. Therefore, we suggest that the recommended optimal level of steamed garlic and Yuza powder in sponge cake is a 4% addition.

• The Korean Journal of Food And Nutrition
• /
• v.26 no.4
• /
• pp.759-765
• /
• 2013

This study investigated the quality characteristics of cookies containing Platycodon grandiflorum powder, which is well known for its various functions and biological activity. Cookie samples were prepared by adding the Platycodon grandiflorum powder at different levels of 0%, 1%, 3% and 5%. In this study, moisture, pH, color, spread factor, hardness and sensory evaluation of cookies were examined. The results showed that the pH and moisture of cookies were decreased when more amount of Platycodon grandiflorum powder was added. Regarding the color of cookies, the L value was decreased when more amount of Platycodon grandiflorum powder was added, where as the a value and b value were increased (p<0.001, p<0.01). The spread factor of cookies generally increased as more amount of Platycodon grandiflorum powder was added, but it was not statistically significant. The hardness of the cookies decreased as more amount of Platycodon grandiflorum powder was added. Cookies containing 1% of Platycodon grandiflorum powder showed the highest scores for overall acceptability, color, taste and texture. Regarding the flavor of cookies, the control showed the highest score, and the score decreased as more amount of Platycodon grandiflorum powder was added.

• Journal of the Korean Society of Food Culture
• /
• v.30 no.2
• /
• pp.213-219
• /
• 2015

This study was conducted to promote the utilization of fish paste containing four different amounts (0%: control, 2, 4, and 6%) of cheonggukjang powder. For Hunter color values, L values of samples decreased as concentration of cheonggukjang powder increased, and a and b values increased. Folding tests for all samples showed good flexibility. In the texture meter test, hardness, cohesiveness, and springiness increased according to increasing concentrations of cheonggukjang powder. However, gumminess and brittleness of fish paste were reduced upon addition of cheonggukjang powder. In the sensory evaluation, fish paste prepared with 2% cheonggukjang powder was more preferred over other fish pastes. This study suggests that addition of 2% cheonggukjang powder to fish paste could be a good way to increase cheonggukjang powder without decreasing texture acceptability.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.4
• /
• pp.524-530
• /
• 2010

The purpose of this study was to determine the characteristics of noodles with added Polygonati odoratum powder. Noodles' water binding capacity increased with increasing amounts of Polygonati odoratum powder. Solubility and swelling power increased with the temperature increasing proportionally to the amounts of added Polygonati odoratum powder. The gelatinization time decreased with increasing of Polygonati odoratum powder. The rate of weight increase and water absorption of cooking noodles decreased with increasing Polygonati odoratum powder. But the turbidity of the soup increased. With increasing Polygonati odoratum powder, L-values were shown to decrease and a and b value were increased. The results of sensory evaluation were that noodles containing under 5% Polygonati odoratum powder were rated as high-quality noodles.

• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.2
• /
• pp.231-237
• /
• 2009

The principal objective of this study was to determine the quality characteristics of tofu prepared with the addition of skate (Raja kenojei) powder. The moisture, crude ash, carbohydrate, crude protein, and crude lipid contents of the used skate powder were 5.34%, 14.15%, 1.90%, 76.60%, and 2.08%, respectivly. The yield rate of the tofu did not differ significantly with the level of added skate powder; however, significant reductions in pH and a significant increase in acidity were observed. The L and b values of the tofu decreased with increases in the amount of added skate powder in the formulation, whereas the a values increased directly with the amount of added skate powder. Furthermore, hardness was increased significantly as the level of skate powder increased. In terms of overall acceptability, the preferred tofu samples were the control and the group to which, 1.0% skate powder was added.

• Journal of the East Asian Society of Dietary Life
• /
• v.22 no.3
• /
• pp.401-407
• /
• 2012

Baked black soybean has great nutritional value, so it is a great potential ingredient in cake. To find an acceptable ingredient ratio, baked black soybean powder was to wheat flour in different experimental groups. The control was pure wheat flour, and the experimental groups had 0 (control), 10%, 20%, 30%, and 40% baked black soybean powder added. The baked black soybean powder consists of moisture (4.88%), crude protein (34.46%), crude fat (11.35%), crude ash (4.84%), and carbohydrates (44.47%). The specific gravity, spreadability, and baking loss increased with an increase in the amount of baked black soybean powder, but specific volume decreased. The 'L' and 'b' chromaticity values of a sponge cake decrease with increased amounts of added baked black soybean powder. The texture becomes more hard and stuff with added baked black soybean powder, but springiness decreases. A sensory test found the best experimental group to be that of 20% powder added.