• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.12
• /
• pp.67-72
• /
• 1993

An adaptive block truncation coding(BTC) using human visual system(HVS) is proposed. To reduce visible blocking effect at sensitive area in HVS. a new category classification coefficient is proposed. The categroy classification coefficient was derived by combining the modified HVS and standard deviation. By computer simulations, we showed that the proposed method reduced blocking effect at low bit rate coding more than the conventional Hui's method.

• Honam Mathematical Journal
• /
• v.40 no.4
• /
• pp.681-689
• /
• 2018

In this paper, we defined new subclasses of Spirallike and Robertson functions by using concept of q-derivative operator. We investigate convolution properties and coefficient estimates for both classes q-Spirallike and q-Robertson functions denoted by ${\mathcal{S}}^{\lambda}_q[A,\;B]$ and ${\mathcal{C}}^{\lambda}_q[A,\;B]$, respectively.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.7
• /
• pp.873-881
• /
• 1997

A numerical simulation has been carried out for three-dimensional turbulent flows around an Ahmed body. The Reynolds-averaged Navier-Stokes equation is solved with the SIMPLE method in general curvilinear coordinates system. Several k-.epsilon. turbulence models with two convective difference schemes are evaluated for the performance such as drag coefficient, velocity and pressure fields. The drag coefficient, the velocity and pressure fields are found to be changed considerably with the adopted k-.epsilon. turbulence models as well as the finite difference schemes. The results of simulation prove that the RNG k-.epsilon. model with the QUICK scheme predicts fairly well the tendency of velocity and pressure fields and gives more reliable drag coefficient. It is also demonstrated that the large difference between simulations and experiment in the drag coefficient is due to relatively high predicted values of pressure drag from vertical rear end base.

• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.183-187
• /
• 2007

적조원격탐사의 기초연구로서 적조생물의 광학적 특성을 조사하였다. 연구에 사용된 적조생물 종은 와편모조류에 속하는 종으로 Scrippsiella trochoidea이다. 광학적 특성 조사를 위해 순수 배양된 생물종을 미세조류은행(KMCC)에서 구입하여 배양하였다. 배양된 샘플로 chlorophyll 농도, 홉광계수(absorption coefficient, a), 소산계수 (attenuation coefficient, c), 역산란계수(backscattering coefficient, $b_b$), 입자크기분포(size distribution, Fd)를 측정하였다. 본 연구의 결과는 2000년 적조 생물종 원격탐사 기술개발 보고서의 결과와 비교해 보았으며, 홉광계수 측정방법에 있어서 filter technique과 부유상태에서 측정한 결과를 비교하였다. 홉광계수에 있어서 기존연구와 본연구의 결과는 매우 유사한 홉광 스펙트럼올 나타내었으며，filter technique와 부유상태에서 측정한 홉광도는 filter technique를 이용한 것이 높은 값을 나타내었다. 이는 multiple absorption, 즉 ${\beta}-effect$에의한 것으로 보인다. 역산란 스펙트럼은 노이즈가 많이 나타났는데 이것은 농도가 충분하지 않아서 나타난 것으로 추정된다. 적조생물의 고유광특성이 해색에 영향을 미칠것이라고 보고 이들 결과는 해색을 재현하기 위한 해색모텔의 입력변수로 활용될 수 있다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1B
• /
• pp.63-70
• /
• 2011

To install the side weirs in inlet of washland construction, it is necessary to calculate more accurately the discharges over side weir. In this study, the hydraulic experiments were performed in broad crested side weirs that installed trapezoidal channel and that considered more applicable to the actual river. Upstream Froude number in the main channel and weir height, length, width and slope of main channel were considerd for estimation of discharge coefficient of broad crested side weir. Experimental results show that the discharge coefficient of broad crested side weir depend on, and. New estimated equation for the discharge coefficient are suggested through the multiple regression analysis and its applicability is confirmed by comparing estimated and measured discharges over side weirs.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.7
• /
• pp.506-511
• /
• 2009

Insect flight is adapted to cope with each circumstance by controlling a variety of the parameters of wing motion in nature. Many researchers have struggled to solve the fundamental concept of insect flight, but it has not been solved yet clearly. In this study, to find the most effective flapping wing dynamics, we conducted to analyze CFD data on fixing some of the optimal parameters of wing motion such as stoke amplitude, flip duration and wing rotation type and then controlled the deviation angle by fabricating wing tip motion. Although all patterns have the similar value of lift coefficient and drag coefficient, pattern A(pear-shape type) indicates the highest lift coefficient and pattern H(pear-shape type) has the lowest lift coefficient among four wing tip motions and three deviation angles. This result suggest that the lift and drag coefficient depends on the angle of attack and the deviation angle combined, and it could be explained by delayed stall and wake capture effect.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.9
• /
• pp.1248-1255
• /
• 2003

Pressure coefficient in a rotating discharge hole was measured to gain insight into the influence of rotation on the discharge characteristics of rotating discharge holes. Pressures inside the hole were measured by a telemetry system that had been developed by the authors. The telemetry system is characterized by the diversity of applicable sensor type. In the present study, the telemetry system was modified to measure static pressure using piezoresistive pressure sensors. The pressure sensor is affected by centrifugal force and change of orientation relative to the gravity. The orientation of sensor installation for minimum rotating effect and zero gravity effect was found out from the test. Pressure coefficients in a rotating discharge hole were measured in longitudinal direction as well as circumferential direction at various rotating speeds and three different pressure ratios. From the results, the behaviors of pressure coefficient that cannot be observed by a non-rotating setup were presented. It was also shown that the discharge characteristics of rotating discharge hole is much more influenced by the Rotation number irrespective of pressure ratio.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.4
• /
• pp.538-545
• /
• 2009

The SiC-$ZrB_2$ composites were fabricated by combining 30, 35, 40 and 45vol.% of Zirconium Diboride (hereafter, $ZrB_2$) powders with Silicon Carbide (hereafter, SiC) matrix. The SiC-$ZrB_2$ composites, the sintered compacts, were produced through Spark Plasma Sintering (hereafter, SPS), and its physical, electrical, and mechanical properties were examined. Also, the thermal image analysis of the SiC-$ZrB_2$ composites was examined. Reactions between $\beta$-SiC and $ZrB_2$ were not observed via X-Ray Diffractometer (hereafter, XRD) analysis. The relative density of the SiC+30vol.%$ZrB_2$, SiC+35vol.%$ZrB_2$, SiC+40vol.%$ZrB_2$, and SiC+45vol.%$ZrB_2$ composites were 88.64%, 76.80%, 79.09% and 88.12%, respectively. The XRD phase analysis of the sintered compacts demonstrated high phase of SiC and $ZrB_2$ but low phase of $ZrO_2$. Among the SiC-$ZrB_2$ composites, the SiC+35vol.%$ZrB_2$ composite had the lowest flexural strength, 148.49MPa, and the SiC+40vol.%$ZrB_2$ composite had the highest flexural strength, 204.85MPa, at room temperature. The electrical resistivities of the SiC+30vol.%$ZrB_2$, SiC+35vol.%$ZrB_2$, SiC+40vol.%$ZrB_2$ and SiC+45vol.%$ZrB_2$ composites were $6.74\times10^{-4}$, $4.56\times10^{-3}$, $1.92\times10^{-3}$, and $4.95\times10^{-3}\Omega{\cdot}cm$ at room temperature, respectively. The electrical resistivities of the SiC+30vol.%$ZrB_2$, SiC+35vol.%$ZrB_2$ SiC+40vol.%$ZrB_2$ and SiC+45[vol.%]$ZrB_2$ composites had Positive Temperature Coefficient Resistance (hereafter, PTCR) in the temperature range from $25^{\circ}C$ to $500^{\circ}C$. The V-I characteristics of the SiC+40vol.%$ZrB_2$ composite had a linear shape. Therefore, it is considered that the SiC+40vol.%$ZrB_2$ composite containing the most outstanding mechanical properties, high resistance temperature coefficient and PTCR characteristics among the sintered compacts can be used as an energy friendly ceramic heater or electrode material through SPS.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.2
• /
• pp.104-108
• /
• 1999

The electrical conductive mechanism and temperature dependence of electrical resistivity of $\alpha-SiC-ZrB_2$ composites with $ZrB_2$ contents were investigated. The electrical resistivity of hot-pressed composites was measured by the Pauw method form $25^{\circ} to 700^{\circ}C$. The electrical resistivity of the composites follow the electrical conduction model for a homogeneous mixture of two kind of particles with different conductivity. Also, the electrical resistivity versus temperature curves indicate the formation of local chains of $ZrB_2$ particles. In case of $\alpha-SiC-ZrB_2$ composites containing above 39vol.% $ZrB_2$ showed positive temperature coefficient resistance(PTCR), whereas the electrical resistivity of $\alpha-SiC-21vol.% ZrB_2$ showed negative temperature coefficient resistance(NTCR).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.693-695
• /
• 2015

The design and implementation of a broadband and linear HPA for TVWS are presented in this paper. The spectrum mask and transmitted power of HPAs for TVWS must be controlled and meet the regulations to minimize interference effects on the present broadcasting systems. The implemented HPA has the operating frequency of 470 ~ 698MHz with the maximum 48.63dB and minimum 43.45dB gain, input reflection coefficient of below -21.32dB, output reflection coefficient of below -4.29dB and the linearity of -45.24dBc at 28.79dBm output power.