• Journal of Technologic Dentistry
• /
• v.30 no.2
• /
• pp.17-22
• /
• 2008

The purpose of this study was to observe the thermal expansion of the inlay waxes at temperature. Inlay pattern wax shows not only a high coefficient of expansion but also a tendency to warp or distort when allowed to stand unrestrained. The thermal expansion of inlay waxes was tested according to the treatment conditions for 10 minutes at $40^{\circ}C$ The thermal expansion of inlay waxes at various temperatures was measured with an electro dial gauge. The results were as fellows: 1. It is shown that the rate of thermal expansion of wax A is 0.2%, wax B is 0.29%, wax C is 0.38%, and wax D is 0.22% at $40^{\circ}C$ 2. It is shown that the coefficient of thermal expansion of wax A is $106{\times}10^{-6}/^{\circ}C$, wax B is $152{\times}10^{-6}/^{\circ}C$, wax C is $199{\times}10^{-6}/^{\circ}C$, and wax D is $116{\times}10^{-6}/^{\circ}C$ at $40^{\circ}C$ 3. The thermal expansion of the inlay waxes at $40^{\circ}C$ was shown to increase in the order of wax C, B, D, A.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.84-91
• /
• 2014

In this study, in order to find the improvement effect of metakaolin for using improvement of strength in concrete structures, it is investigated the diffusion coefficient of chloride ions and adiabatic temperature rise test. As a result, due to the mixing of metakaolin, it has been confirmed reducing diffusion coefficient of chloride ions and could prevent down of slump for use of adding fly ash. Therefore, ensuring resistance to chloride ion penetration into concrete, it is possible to enlarge the W/B ratio and reduce the adiabatic temperature rise by mixing of metakaolin. So, it is confirmed that the durability of concrete structures is increased.

• Electrical & Electronic Materials
• /
• v.8 no.2
• /
• pp.224-228
• /
• 1995

0.15(B $a_{0.95}$ S $r_{0.05}$)O-0.15S $m_{2}$ $O_{3}$-0.7Ti $O_{2}$ ceramics were fabricated by the mixed-oxide method. Microwave dielectric properties were investigated with sintering conditions. Increasing the sintering temperature from 1300 to 1375[.deg. C], the sintered density was increased from 5.44 to 5.63[g/c $m^{3$]. Increasing the sintering temperature, dielectric constant and quality factor were increased and temperature coefficient of resonant frequency was independent of sintering temperature. In the specimen sintered at 1375[.deg. C], dielectric constant, quality factor and temperature coefficient of resonant frequency were 80.79, 2784(at 3[GHz]), +11.07[ppm/.deg. C], respectively..

• Advances in concrete construction
• /
• v.5 no.4
• /
• pp.359-375
• /
• 2017

This paper presents a study of the properties and behavior of self-compacting concretes (SCC) in the hot climate. The effect of curing environment and the initial water curing period on the properties and behavior of SCC such as compressive strength, ultrasonic pulse velocity (UPV) and sorptivity of the SCC specimens were investigated. Three Water/Binder (W/B) ratios (0.32, 0.38 and 0.44) have been used to obtain three ranges of compressive strength. Five curing methods have been applied on the SCC by varying the duration and the conservation condition of SCC. The results obtained on the compressive strength show that the period of initial water curing of seven days followed by maturation in the hot climate is better in comparison with the four other curing methods. The coefficient of sorptivity is influenced by W/B ratio and the curing methods. It is also shown that the sorptivity coefficient of SCC specimens is very sensitive to the curing condition. The SCC specimens cured in water present a low coefficient of sorptivity regardless of the ratio W/B. Furthermore, the results show that there is a good correlation between ultrasonic pulse velocity and the compressive strength.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.4 no.1
• /
• pp.33-47
• /
• 1992

Experimental investigation on the performance of a heat pump system using refrigerant mixtures is done. The condenser and the evaporator are double pipe heat exchangers of counter flow type and the compressor is driven by a variable speed motor. The refrigerant mixture used in the experiment is R22/R142b. Experiments are performed by changing the compressor speed, composition on ratio of mixture, and the average temperatures of condenser and evaporator. The compressor work, heating capacity and the coefficient of performance are calculated. Results show that the heating capacity can be changed by varying the mass flow rate of refrigerant mixtures to meet the heating load. It is shown that the capacity control by changing the composition ratio is more effective than by changing the compressor speed. Under the condition where the external conditions are fixed and the heating loads are equal, the coefficient of performance has its maximum value near 50 : 50 mass fraction of the refrigerant mixture in this study.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.391-395
• /
• 2000

In this study, the temperature coefficient of resonant frequency(TC $F_{r}$), dielectric and piezoelectric properties of Pb[(S $b_{1}$2/N $b_{1}$2/)$_{0.0035}$-(M $n_{1}$3/N $b_{2}$3/)$_{0.0065}$-(Z $r_{x}$ $Ti_{1-x}$ )$_{0.90}$] $O_3$ceramics is investigated with Zr/Ti ratio. The dielectric constant and electromechanical coupling factor( $k_{p}$) showed the highest values of 1257, 0.562 respectively when the Zr/Ti ratio is 49.5/50.5. The mechanical quality factor( $Q_{m}$) is the lowest value of 713 when the Zr/Ti ratio is 49.5/50.5, and increased with the decrease of the Zr/Ti ratio. The temperature coefficient of resonant frequency(TC $F_{r}$) change abruptly at the morphotropic phase boundary(MPB), which is between the rhombohedral phase with highly negative TC $F_{r}$ of -106ppm/$^{\circ}C$ and the tetragonal phase with highly positive TC $F_{r}$ of +64pp $m^{\circ}C$ as Zr/Ti ratio changes from 50/50 to 49.5/50.5.50.5..5.50.5.5.

• Journal of Korean Society for Atmospheric Environment
• /
• v.10 no.1
• /
• pp.32-40
• /
• 1994

Continuous measurements of the extinction coefficient( $b_{ext}$ ) and scattering coefficient due to Particle( $b_{sp}$ ) were made during the fall 1993 in Seoul along with the measurements of the size distribution, ionic composition of particles. On the average, $b_{sp}$ values are 55% and 79% of $b_{ext}$ values during the clear and smoggy Periods respectively. Also the average values of $b_{ext}$ and $b_{sp}$ were 0.791$\times$10$^{-3}$ $m^{-1}$ (visual range 4.9km) and 0.628$\times$10$^{-3}$ $m^{-1}$ (visual range 6.2km) during the smoggy Period, and 0.297$\times$10$^{-3}$ $m^{-1}$ (visual range 13.1km) and 0.164$\times$10$^{-3}$ $m^{-1}$ (visual range 23.8km) during the clear period, respectively. The Peak at about 1${\mu}{\textrm}{m}$ of the Particle size distribution during the smoggy period is about four times higher than that during the clear period while the peaks at about 5${\mu}{\textrm}{m}$ during both periods are similar. Also, the concentrations of sulfate and nitrate at about 1${\mu}{\textrm}{m}$ during the smoggy Period are much higher than these during the clear Period.eriod.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.10
• /
• pp.613-615
• /
• 2014

The design and implementation of a broadband and linear HPA(High Power Amplifier) for TVWS are presented in this paper. The spectrum mask and transmitted power of HPA for TVWS must be controlled and meet the regulations to minimize interference effects on present broadcasting systems. The implemented HPA has the operating frequency of 460 ~ 698MHz with $24.7{\pm}1dB$ gain, input reflection coefficient of below -25dB, output reflection coefficient of below -7.28dB and the linearity of -57.7dBc at 22.2dBm output power.

• Journal of Powder Materials
• /
• v.17 no.1
• /
• pp.1-6
• /
• 2010

In this study, a convergent heat treatment was performed in certain temperature regions in order to control the microstructures of Nd-rich phases and to reduce thermal stress on grain boundaries which could be caused during expansion and shrinkage of Nd-rich and $Nd_2Fe_{14}B$ phases. The difference of thermal expansion coefficient between $Nd_2Fe_{14}B$ and Nd-rich phases is the mechanism for convergent heat treatment. The Nd-rich phases which were located in junctions could penetrate into the grain boundaries between $Nd_2Fe_{14}B$ phases due to the difference of thermal expansion coefficient. Through the convergent heat treatment, the microcracks that were observed in cyclic heat treatment were not observed and coercivity was increased to 34.05 kOe at 8 cycles.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.7
• /
• pp.1249-1255
• /
• 2008

1530nm band has been studied as pump wavelength for long-wavelength-band erbium-doped fiber amplifier (L-band EDFA). The pump source is built using a tunable light source and cascaded conventional-band (C-band) EDFA. The L-band EDFA uses a forward pumping scheme. Within the 1530nm band, 1545nm pump demonstrates 0.45dB/mW gain coefficient, which is twice better than that of conventional 1480nm pumped EDFA. The noise figure of 1530nm pump is at worst 6.36dB, which is 0.75dB higher than that of 1480nm pumped EDFA. Such high gain coefficient indicates that the L-band EDFA consumes low power.