• Journal of the Korean Vacuum Society
• /
• v.8 no.4B
• /
• pp.548-555
• /
• 1999

The NBI (Neutral BGeam Injection) System for the Korea Superconducting Tokamak Advanced Research (KSTAR) is composed of ion sources, neutralizers, bending magnets, ion dumps, and calorimeter. The vacuum chamber, in which all of the beam line components are enclosed, is composed of differential pumping system for the effective transfer of the neutral beams. The needed pumping speeds of each of the divided vacuum chamber and the optimized gas flow rate ot the neutralizer were calculated with the help of the particle balance equations. The minimum gas flow rate to the ion sources for producing needed beam current (120kV, 65A, 78MW), the pressure distributions in the vacuum chamber for minimizing re-ionization loss, and the beam loss rate on the beam line components were used as the input in the calculation. Also the scenario for short pulse operation was determined by analysing the time dependent equations. It showed that beam extraction during less than 0.5 sec could be made only with TMP.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.110-112
• /
• 2004

The outage management is very important because the outage causes a severe damage to the power system. Therefore, the utilities employ the outage management system, which is different from each others. This paper suggests the four kind of database systems for outage management. The efficiency of the outage management may be improved by using the suggested database system.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.50-52
• /
• 2002

GPSS(Graphic-based Power System Simulator) had been introduced before in an ex-thesis. GPSS is a Power System Simulator that is designed to provide friendly and highly interactive Graphic User Interface (GUI). In this Paper, GPSS was improved not for the education or the test, but as the instrument for a large-scale systematic analysis. To limit the difference between a theory and practical affairs, we reformed and added a lot of functions to the GPSS. And we have verified the real-systematic data.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.313-315
• /
• 2002

Frequency and phasor are the most important quantities in power system operation because they can reflect the whole power system situation. This paper proposes a design and implementation using phase angle difference calculation for frequency measuring in power system. The process is considered to be complicated as compared to the present proposed method. Performance test results, using signals from Excel program, indicate that the proposed technique can provide accurate estimates within 16ms.

• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.136-139
• /
• 2001

KEPRI successfully developed and installed RTDS(Real-Time Digital Simulator) during March 2001. The simulator will be used to study interactive simulation of electromagnetic & electromechanical and validation of protective & control systems. In this paper. the authors will present an overview of real-time digital simulator and its characteristic features. Special emphasis will be placed to the installation test results. This paper also addresses some key issues on the accuracy, reliability flexibility and its practical uses for real-time power simulation.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.1013-1016
• /
• 1999

In this paper, a real-time communication method using a PICNET-NP(Plant Instrumentation and Control Network for Nuclear Power plant) is proposed with an analysis of the control network requirements of DCS (Distributed Control System) in nuclear power plants. The method satisfies deadline in case of worst data traffics by considering aperiodic and periodic real-time data and others. In addition, the method was used to analyze the data characteristics of the DCS in existing nuclear power plant. The result shows that use of this method meets the response time requirement(100ms)

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1475-1477
• /
• 1999

The setting of protective relays, which is critical to the system security, requires a huge volume of data and a lot of repetitive calculations. Therefore computerization of this process, named PROSET2000 is in progress in KEPCO. PROSET2000 is based on a power system protection database. The database must accomodate a variety of protective device data efficiently, which need be viewed and updated with ease. This paper suggests several database management functions for PROSET2000.

• Proceedings of the KIEE Conference
• /
• 2003.07e
• /
• pp.92-95
• /
• 2003

Frequency is an important operating parameter of a power system. Electric power systems sustain transient frequency swings whenever the balance between generation and load does not no longer hold. To cope with this Constraints. it requires an accurate and high speedy frequency deviation estimation technique and suitable adjustment to obtain the power system energy balance. This paper describes the design, computational aspects and implementation of an iterative technique for measuring power system. The rate change of the phase angle is used for estimation. To confirm the validity of the proposed algorithm, the simulation studies carried out on a typical 154[KV] double T/L system by using EMTP software. Some test results are presented in the paper.

• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.23-25
• /
• 1993

This paper presents a design technique of self-organizing fuzzy controller using a learning method of fuzzy inference rule by a gradient method for load frequency control of power system. The membership functions in antecedent part and in consequent part of fuzzy inference rules are tuned by the gradient method. The related simulation results show that the proposed fuzzy controller are more powerful than the conventional ones for reduction of undershoot and deviation of load frequency in steady-state, and for minimization of settling time.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.96-99
• /
• 1992

In the planning stage of bulk power transmission system, reliability evaluation has been a major issue in the sense of suppling reliable power at the minimum cost. MEXICO program, based on Monte-Carlo simulation method, is known as a valuable tool for reliability evaluation. This paper presents the empirical study results when using MEXICO program for IEEE-RTS, IEEE-MRTS and KEPCO-233 system.