• Journal of the Korean Applied Science and Technology
• /
• v.39 no.5
• /
• pp.605-613
• /
• 2022

The genus Flavobacterium, type genus of the family Flavobacteriaceae and a member of the phylum Bacteriodetes includes gram-negative and yellow-pigmented rods. Those bacteria have been isolated from various environments of the earth. A yellow-pigmented, gram-negative rod was isolated from a pond in the campus of the Changwon University, Changwon, Kyeongnam and designated as strain B1. Strain B1 was further analyzed physiologically, biochemically and phylogenetically, and concluded to be a member of genus Flavobacterium. BLAST search of the 16S rRNA gene sequence of strain B1 shows homology no higher than 99.0% with those sequences of other bacteria. The major fatty acids of strain B1 are iso-C_15:0 (19.6%), summed feature 3(C_16:1 ω7c and/or C_16:1 ω6c, 16.1%), iso-C_17:0 3OH(10.2%), iso-C_15:0 3OH(8.4%) and iso-C_15:1 G(6.6%) showing significant differences in fatty acid compositions between strain B1 and the other known Flavobacterium species. DNA sequence of 16S rRNA gene of strain B1 was deposited in genbank under accession number OP060681.

• Transactions of Materials Processing
• /
• v.15 no.7 s.88
• /
• pp.504-511
• /
• 2006

The drawability of AZ31B magnesium sheet is estimated at various temperatures($200,\;250,\;300,\;350\;and\;400^{\circ}C$), and forming speed(20, 50, 100mm/min), thickness(0.5, 0.8, 1.0, 1.4mm). The deep drawing process of circular cup and square cup were used in forming experiments. Experimental and FEM analysis are performed to investigate drawability and affection of controlled blank holding force. Through the controlled blank holding force, drawability was improved. Limit drawing ratio is increased from 2.1 to 3.0 in circular cup drawing and change of thickness is decreased from 16.3 to 6.9%. This result is verified by FEM analysis. Through the observation of microstructure, the main cause is investigated as a quantity of the dynamic recrystallization.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.48-52
• /
• 2006

The drawability of AZ31B magnesium sheet is estimated at various temperatures (200, 250, 300, 350 and $400^{\circ}C$), and forming speed (20, 50, 100 mm/min), thickness (0.5, 0.8, 1.0, 1.4 mm). The deep drawing process of circular cup and square cup were used in forming experiments. Experimental and FEM analysis are performed to investigate drawability and affection of controlled blank holding force. Through the controlled blank holding force, drawability was improved. This result is verified by FEM analysis. Through the observation of microstructure, the main cause is investigated as a quantity of the dynamic recrystallization.

• Speech Sciences
• /
• v.7 no.2
• /
• pp.157-175
• /
• 2000

The aim of this paper was to diagnose Korean college students' listening skills on the TOEFL. The researchers identified which section, among the TOEFL listening Part A, B, and C, is most easily teachable/ improvable during the period of a semester. First, the result of this research shows that Korean students tend to have lower scores in Part A than Part B or Part C. The results indicate that the short informal conversation doesn't give sufficient clues to students, and they don't have enough time to infer the answer. Second, the results revealed that. students showed the lowest progress in Part B after they studied TOEFL listening items and essential idioms for the listening section for 13 weeks. Because students didn't have much experience learning the informal conversation as opposed to the formal one in English, it is harder to achieve an improved grade in Part B, which consists of the informal conversation. But after a semester-long listening course, the average score on TOEFL listening sections increased.

• Journal of the Korean Chemical Society
• /
• v.38 no.4
• /
• pp.276-282
• /
• 1994

Perovskite-type mixed oxides LaBO$_3$(B = Mn, Fe, Co) were prepared by citrate sol-gel method in $air(850^{\circ}C$, 24h). The oxygen stoichiometries and structures of these oxides were determined by XRD and TPR results as followings; LaMnO$_{3.16}$(a = 5.507, c = 13.329 $\AA$, hexagonal), LaFeO$_{3.17}$(a = 5.554, b = 5.555, c = 7.863 $\AA$, orthorhomibic), LaCoO$_{3.0}$(a = 5.436, c = 13.095 $\AA$, hexagonal). The temperature programmed reduction(TPR) experiments in static 300 torr H$_2$ atmosphere shows that the reduction reaction of LaBO$_3$(B = Mn, Fe, Co) proceeds into two stages, and thermal stabilities of these oxides decreased in the order of LaMnO$_3$ > LaFeO$_3$ > LaCoO$_3$. According to the kinetic analysis the lowest activation energy was obtained for LaCoO$_3$.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.7
• /
• pp.2249-2252
• /
• 2011

Two new carborane complexes containing closo- or nido-carborane diphosphine ligands with the formula: complex $[Hg(7,8-(PPh_2)_2-7,8-C_2B_9H_{10})_2]$ $CH_2Cl_2$ (1) and $[Ag_2({\mu}-Cl)_2(1,2-(P^iPr_2)_2-1,2-C_2B_{10}H_{10})_2]$ (2) have been synthesized and characterized by elemental analysis, 1H and 13C NMR spectroscopy and X-ray structure determination. The X-ray structure analyses revealed that the carborane diphosphine ligand was degraded from closo-1,2-$(PPh_2)_2-1,2-C_2B_{10}H_{10}$ to nido-[$7,8-(PPh_2)_2-7,8-C_2B_9H_{10}]^-$ in complex 1, while the closo nature of the starting ligand $1,2-(P^iPr_2)_2-1,2-C_2B_{10}H_{10}$ was retained in complex 2. In either of the two complexes, the carborane diphosphine ligand was coordinated bidentately to the Hg(II) or Ag(I) center through its two phosphorus atoms, therefore forming a five-member cheating ring between the carborane ligand and the metal center. The coordination geometry of the metal atom is distorted tetrahedron formed by $P_4$ unit in complex 1 and $P_2Cl_2$ unit in complex 2, respectively.

• Journal of the Korean Society of Safety
• /
• v.32 no.4
• /
• pp.129-136
• /
• 2017

This study investigated the probability of possible accident through qualitative and quantitative analysis of the pressure safety valve types installed in facilities using high pressure gas to compare the installation domestic and foreign pressure safety valve standards sought the safety characteristics and safety improvement direction accordingly. The three types are the case where the shut-off valve is not installed at the front of the PSV (Case A), If a shut-off valve is installed at the front of the PSV for inspection (Case B) and If a shut-off valve is installed in front of PSV (C.S.O), PSV is installed in parallel (Case C). Three types of cases were compared with FTA and HAZOP. The results of study of the possible accidents due to over-pressure safety valve installation type, used in a high-pressure gas facilities was shows in the following order Case B > Case A > Case C. The results of analysis through FTA was in order to protect the reservoir for the possible occurring of accident the safety valve installation is depend on its type. In the FTA analysis, defects in the device itself which attached to the storage tank as a substitute for analysis of the probability of operator mistakes was Case B with as high as $2.01{\times}10^{-6}$. Depending on the type of installation analysis of Case B in order to ensure safety is prohibited to install shut-off valve and believes that mandatory regulations are needed. Rationally installing of pressure safety valve in the high pressure using facilities will be expected to improve the industrial safety from severe accidents such as high-pressure gas fire explosion.

• ALGAE
• /
• v.37 no.2
• /
• pp.123-133
• /
• 2022

Genetic diversity and distribution patterns of marine macroalgae are increasingly being documented in Southeast Asia. These studies show that there can be significant levels of genetic diversity and isolation between populations on either side of the Thai-Malay Peninsula. Bostrychia tenellla is a common filamentous red seaweed in the region and the entity is represented by at least two cryptic species. Despite being highly diverse and widespread, genetic variation and population structure of this species complex remains understudied, especially around the Thai-Malay Peninsula. We analyzed genetic diversity and inferred the phylogeographic pattern of specimens identified as B. tenella using the plastid RuBisCo spacer from samples from the Andaman Sea and the Gulf of Thailand. Our genetic analysis confirmed the occurrence of the two cryptic B. tenella species (B and C) along both coasts. Cryptic species B was more common in the area and displayed higher genetic diversity than species C. Historical demographic analyses indicated a stable population for species B, but more recent population expansion for species C. Our analyses also revealed that both cryptic species from the Andaman Sea possessed higher genetic diversity than those of the Gulf of Thailand. We also detected moderate to high levels of gene flow and weak phylogeographic structure of cryptic species B between the two coasts. In contrast, phylogeographic analysis showed genetic differences between populations of both cryptic species within the Andaman Sea. Overall, these results suggest that cryptic B. tenella species around Thai-Malay Peninsula may have undergone different demography histories, and their patterns of genetic diversity and phylogeography were likely caused by geological history and regional sea surface current circulation in the area.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.493-494
• /
• 2007

• Structural Engineering and Mechanics
• /
• v.18 no.1
• /
• pp.79-90
• /
• 2004

A high precision shear deformable triangular element has been proposed for bending analysis of triangular plate. The element has twelve nodes at the three sides and four nodes inside the element. Initially the element has thirty-five degrees of freedom, which has been reduced to thirty by eliminating the degrees of freedom of the internal nodes through static condensation. Plates having different boundary conditions, side ratios (b/a) and thickness ratios (h/a = 0.001, 0.1 and 0.2) have been analyzed using the proposed shear locking free element. Concentrated and uniformly distributed transverse loads have been used for the analysis. The formulation is made based on first order shear deformation theory. For validation of the present element and formulation few results of thin triangular plate have been compared with the analytical solutions. Results for thick plate have been presented as new results.