• Journal of Advanced Navigation Technology
• /
• v.4 no.2
• /
• pp.182-190
• /
• 2000

In this paper, interference effects between NGSO and HAPS in the feeder link have been simulated and analyzed by means of calculating excess time percent and duration below the ell protection ratio. As the results, in the case of HAPS interference into NGSO, it can be obtained that the lowest C/I values are 20.42dB in 50km and 12.73dB in 20km of HAPS altitudes, respectively. And in the case of NGSO interference into HAPS, it can be obtained that the lowest ell values are 13.94dB and 10.42dB respectively. HAPS system has more interference reception from other systems or effects more interference into other systems as its altitude is lower. Also, the lowest ell values are appeared at difference time with its altitude.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1436-1438
• /
• 2001

The $\beta$-SiC + $ZrB_2$ ceramic electroconductive composites were pressureless-sintered and annealed by adding 12wt% $Al_2O_3$ + $Y_2O_3$ (6 : 4wt%) powder as a function of sintering temperature. The relative density showed the highest value of 81.1% at 1900$^{\circ}C$ sintering temperature. The phase analysis of the composites by XRD revealed of $\alpha$-SiC(6H), $TiB_2$, $Al_5Y_2O_{12}$ and $\beta$-SiC(15R). Flexural strength showed the highest value of 230 MPa for composites sintered at 1900$^{\circ}C$. The vicker's hardness and the fracture toughness showed the highest value of increased with increasing sintering temperature and showed the highest of 9.88 GPa and 6.05 $MPa{\cdot}m^{1/2}$ at 1900$^{\circ}C$. The electrical resistivity was measured by the Pauw method from 25$^{\circ}C$ to 700$^{\circ}C$. The electrical resistivity of the composites showed the PTCR (Positive Temperature Coefficient Resistivity).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05c
• /
• pp.118-122
• /
• 2001

The ${\beta}-SiC+TiB_2$ ceramic electroconductive composites were pressureless-sintered and annealed by adding 12wt% $Al_2O_3+Y_2O_3$(6 : 4wt%) powder as a function of sintering temperature. The relative density is over 78.83% of the theoretical density and increased with increasing sintering temperature. The phase analysis of the composites by XRD revealed of $\alpha$-SiC(6H), $TiB_2$, $Al_5Y_2O_{12}$ and $\beta$-SiC(15R). Flexural strength showed the highest of 140 MPa for composites sintered at $1900^{\circ}C$. The vicker's hardness increased with increasing sintering temperature and showed the highest of 4.07 GPa at $1900^{\circ}C$. Owing to YAG, the fracture toughness showed the highest of 4.07 $MPa{\cdot}m^{1/2}$ for composites at $1900^{\circ}C$. The electrical resistivity was measured by the Pauw method from $25^{\circ}C$ to $700^{\circ}C$. The electrical resistivity of the composites showed the PTCR(Positive Temperature Coefficient Resistivity).

• Journal of the Korean Ceramic Society
• /
• v.21 no.4
• /
• pp.349-354
• /
• 1984

The purpose of present study is to find the structure crystallization mechanism and physical properties in $TiO_2$ containing lead zinc borosilicate glass system. The experiments such as differential thermal analysis infrared spectral analysis. X-ray diffraction analysis and thermal expansion measurements have been done. Differential thermal analysis of coarse and fine glass powder showed bulk nucleating mechanism for high $TiO_2$ containing glasses and surface nucleation mechanism for low $TiO_2$ containing glasses. The prepared glasses crystallized to crystalline mixture of PbO.2ZnO. $B_2O_3$ .4PbO.2ZnO.$5B_2O_3$and 2PbO.ZnO.$B_2O_3$ when heat-treated in the range of 480 and 51$0^{\circ}C$ and crystallized to PbTiO3 when heat-treated at $600^{\circ}C$. Obtained crystalline phase of $PbTiO_3$ in glass matrix strongly affects to thermal expansion coefficient and the value of crystallized glass varied 68.0 to $107.1{\times}10-7$/$^{\circ}C$ depending on the amount of $TiO_2$added. Infrared spectral analysis showed that [$BO_3$] triangle and [$BO_3$] tetrahedral units were coexisted in the glass with high content of PbO.

• Asian-Australasian Journal of Animal Sciences
• /
• v.7 no.4
• /
• pp.509-512
• /
• 1994

High performance liquid chromatography (HPLC) analysis was applied for determination of guanine plus cytosine (G + C) contents of DNA of Butyrivibrio fibrisolvens. By values of G + C contents, a reference strain and 20 wild strains of B. fibrisolvens were classified into at least two distinct subgroups, i.e. G + C contents of 18 strains were 38-40 mol% and those of 3 strains including the reference strain were 43-45 mol%. Clear relationships were not observed between G + C contents and biological properties of 21 strains of B. Fibrisolvens.

• Journal of Information Technology Services
• /
• v.2 no.1
• /
• pp.75-83
• /
• 2003

Among EC areas. the B2B EC market is being spotlighted as an important interesting research area considering its size and the potential impact on companeies and the whole society. In comparison with private consumers in B2C EC. business buyers in B2B EC have to precisely keep track of the purchase records. and integrate them with the buyer's e-procurement system, which might have been implemented as a part of integrated ERP (Enterprise Resource Planning) systems. There are three approaches for such integration between ERP and e-marketplace in B2B EC; Two previous approaches are Inside-Out approach and Outside-In approach. And a newly, one is b-cart approach. In this paper, we try to survey these three approaches and make a comparison analysis. From this research. we identify that the b-cart approach is the most efficient framework in integrating ERP with e-marketplace in B2B EC.

• The Journal of Korean Academy of Prosthodontics
• /
• v.29 no.1
• /
• pp.233-248
• /
• 1991

The purpose of this study was to qunatatively analyze the stress patterns induced in the abutment, superstructure, supporting bone and to determine the deflection of abutment and superstructure by appling occlusal force to natural teeth supported fixed prostheses and implant-supported fixed prostheses. The analysis has been conducted by using the two dimensional finite element method. The implant and natural tooth-supported bridge has a first molar pontic supported by mandibular second bicuspid and implant posterior retainer, which were rigidly(Model A) or flexible(Model B). The natural teeth-supported bridge has a first molar pontic supported by mandibular second bicuspid and second molar, which were rigidly splinted together(Model C). 63.5kg(Load P1) of localized load on central fossa of first molar pontic and 24kg(Load P2) of distributed load on each occlusal surface were applied respectively. 1. The coronal portion of premolar pontic and posterior abutment in fixed partial denture deflected inferiorly in order of Model B, Model C and Model A under Load P1 and Load P2. 2. Mesial displacement of the coronal portion of premolar showed in Model A, Model B and Model C under Load P1, but mesial displacement of that in Model B and distal displacement of that in Model A and Model C showed under Load P2. 3. Mesial displacement of the coronal portion of the pontic and distal displacement of the coronal portion of posterior abutment showed in Model A, Model B and Model C under Load P1 and Load P2. Displacement in the case of Model B was greater than that of Model A and Model C. 4. In the case Model A under Load P1 and Load P2, high stress apically was concentrated in the mesiocervical portion of the posterior abutment than in the disto-cervical portion of the premolar. 5. In the case of Model B under Load P1 and Load P2 high stress was concentrated in the case of the premolar than in that of posterior abutment and high stress especially was concentrated in the connected portion of pontic and posterior abutment. 6. In the case of Model C under Load P1 and Load P2, high stress was concentrated in the distal area of the cornal portion of premolar and the mesial area of the coronal portion of posterior abutment, and stress pattern was anteroposterially symmetric around the pontic. 7. Load P1 and Load P2 compared, stress magnitude was different but stress pattern was similar in Model A, Model B and Model C. 8. Under Load P1 and P2, stress magnitude in the mesial distal portion and the portion of root apex of the posterior abutment was in order of Model B, Model A and Model C.

• The Journal of Fisheries Business Administration
• /
• v.14 no.1
• /
• pp.44-56
• /
• 1983

This study is attempted to serve the fundamental theory for ‘The reorganization of Korean coastal and adjacent water fishery.’ On the Korean coastal and adjacent water fishery where one species stock is catched by multiple fisheries, traditional analysis is not suitable, as analyzing through adjusting the heterogeneous fishing effort among the fisheries to an unit having same fishing strength. Therefore, this study presents the ‘Multi-Variable Model’, adopting fishing effort from each fishery as independent variable, respectively, in order to analyze the quantitative fluctuation of fishery resource not with fishing strength but with amount of fishing effort, measured by the unit of each fishery. For the sake of simplication, this study assumes that one species is catched by two fishery, premise two assumption. 1) Every fishery has not the selectivity in fishing 2) The promotion of fishing efficiency is accomplished in the same speed. Resource equilibrium equation of each fishery is; $$CPUE_1=\frac{Y_1}{E_1}=a_1+ b_1\cdot E_1+c_1\cdot E_1$$ $$CPUE_1=\frac{Y_1}{E_1}=a_1+ b_1\cdot E_1+c_1\cdot E_1$$ Sustainable yield equation is; $$SY_1=a_1\cdot E_1+\cdot b_1E{_1}{^2}+c_1\cdot E_1\cdot E_1$$ $$SY_1=a_1\cdot E_1+b_1\cdot E_1\cdot E_1+c_1\cdot E{_1}{^2}$$ This study is rudimentary, hereafter, refinemental analysis will be supplemented.

• The Journal of Fisheries Business Administration
• /
• v.43 no.3
• /
• pp.31-41
• /
• 2012

This paper was conducted to study the economic valuation for Nursery-Phase production of the tidal flat oyster in Korea. Benefit-cost(B/C) model used to indicate the effects of economic valuation. Using discounting rates(i.e., 4.5%, 6.5% and 8.5%), the model compared revenues and costs that occur at different times from 2012 to 2018. This study also estimated various submodels, which are Benefit Cost Ratio(B/C ratio), Net Present Value(NPV), Internal Ration of Return(IRR), to compare profit of Nursery-Phase production styles and analyzed returns to evaluate the scenarios. Sensitivity analysis were conducted for various scenarios. The results suggest as follows. First, the oyster spat to the shell height of 3~5cm was more profit than the shell height of 1~3cm. Second, all of sensitivity analysis with submodels were economic valuation such that B/C ratio > 1, NPV > 0 and IRR > discounting rate. Third, the payback period was about 3years after installed Nursery-Phase production system.

• Archives of Pharmacal Research
• /
• v.21 no.5
• /
• pp.521-526
• /
• 1998

The physicochmical properties of recombinant hepatitis B surface antigen (r-HBsAg), which was expressed in C127 mammalian cell were studied. Using roller bottle culture in DMEM supplemented with fetal bovine serum, 10-15 mg/L of r-HBsAg was produced with about 31% of purification yield. The purity of r-HBsAg by HPLC was 99.8% and electron microscopic examination showed homogeneous spherical particle with 22 nm in diameter, a morphological characteristic of HBsAg. The density of r-HBsAg by CsCI density gradient method was 1.19g/ml and the isoelectric point by Mono $P^{TM}$ HR 5/20 column was 4.6. The analysis of subunit protein pattern using SDS-PAGE followed by scanning densitometry gave 81.3% of S protein and 18.7% of pre-S protein. fluorophore-assisted-carbohydrate-electrophoresis analysis showed the relative amount of carbohydrate to protein was 1.7% and it smajr component was N-acetyl glucosamine, which was about 39% of total carbohydrate. The relative amount of lipid to protein determined by vanillin phosphoric acid method was 32.5% and its major component was phospholipid, which was about 70% of total lipid. The physicochemical properties of C127 mammalian cell-derved r-HBsAg are similar to those of p-HBsAg, suggesting that the r-HBsAg can be used in developing a new preventive vaccine against hepatitis B.