• Journal of Electrical Engineering and Technology
• /
• 제4권4호
• /
• pp.538-545
• /
• 2009

The SiC-$ZrB_2$ composites were fabricated by combining 30, 35, 40 and 45vol.% of Zirconium Diboride (hereafter, $ZrB_2$) powders with Silicon Carbide (hereafter, SiC) matrix. The SiC-$ZrB_2$ composites, the sintered compacts, were produced through Spark Plasma Sintering (hereafter, SPS), and its physical, electrical, and mechanical properties were examined. Also, the thermal image analysis of the SiC-$ZrB_2$ composites was examined. Reactions between $\beta$-SiC and $ZrB_2$ were not observed via X-Ray Diffractometer (hereafter, XRD) analysis. The relative density of the SiC+30vol.%$ZrB_2$, SiC+35vol.%$ZrB_2$, SiC+40vol.%$ZrB_2$, and SiC+45vol.%$ZrB_2$ composites were 88.64%, 76.80%, 79.09% and 88.12%, respectively. The XRD phase analysis of the sintered compacts demonstrated high phase of SiC and $ZrB_2$ but low phase of $ZrO_2$. Among the SiC-$ZrB_2$ composites, the SiC+35vol.%$ZrB_2$ composite had the lowest flexural strength, 148.49MPa, and the SiC+40vol.%$ZrB_2$ composite had the highest flexural strength, 204.85MPa, at room temperature. The electrical resistivities of the SiC+30vol.%$ZrB_2$, SiC+35vol.%$ZrB_2$, SiC+40vol.%$ZrB_2$ and SiC+45vol.%$ZrB_2$ composites were $6.74\times10^{-4}$, $4.56\times10^{-3}$, $1.92\times10^{-3}$, and $4.95\times10^{-3}\Omega{\cdot}cm$ at room temperature, respectively. The electrical resistivities of the SiC+30vol.%$ZrB_2$, SiC+35vol.%$ZrB_2$ SiC+40vol.%$ZrB_2$ and SiC+45[vol.%]$ZrB_2$ composites had Positive Temperature Coefficient Resistance (hereafter, PTCR) in the temperature range from $25^{\circ}C$ to $500^{\circ}C$. The V-I characteristics of the SiC+40vol.%$ZrB_2$ composite had a linear shape. Therefore, it is considered that the SiC+40vol.%$ZrB_2$ composite containing the most outstanding mechanical properties, high resistance temperature coefficient and PTCR characteristics among the sintered compacts can be used as an energy friendly ceramic heater or electrode material through SPS.

• 산경연구논집
• /
• 제15권5호
• /
• pp.1-15
• /
• 2024

Purpose: The purpose of this study is to explore the development and characteristics of e-commerce in China and analyze the current status of e-commerce platforms in China. Research design, data and methodology: To explore the development of e- commerce in China, this study collects and analyzes Chinese journals and secondary sources. It also conducts a case analysis of the success strategies of leading Chinese e-commerce companies. Results: The analysis showed that China's e-commerce is active in various forms of e-commerce, including B2B, B2C, and C2C, and that the development of e-commerce in China has been divided into three main stages. The Chinese government has been actively implementing various policies to promote the development of e-commerce. Conclusions: In this context, this paper specifically examines the development process of e- commerce in China, the current status of the Chinese e-commerce market, and the characteristics of the Chinese e-commerce market. In addition, the paper analyzes representative B2B, B2C, and C2C companies in China's e-commerce market. The results of the analysis show that Huichongwang, a B2B company, Jingdong, a B2C company, and Taobao, a C2C company, have achieved rapid growth through their core strategies and capabilities. The study also analyzed in detail the problems faced by the Chinese government and companies.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1252_1253
• /
• 2009

The composites were fabricated by adding 0, 15, 20, 25[vol.%] Zirconium Diboride(hereafter, $ZrB_2$) powders as a second phase to Silicon Carbide(hereafter, SiC) matrix. The physical, mechanical and electrical properties of electroconductive SiC ceramic composites by spark plasma sintering(hereafter, SPS) were examined. Reactions between $\beta$-SiC and $ZrB_2$ were not observed in the XRD analysis The relative density of mono SiC, SiC+15[vol.%]$ZrB_2$, SiC+20[vol.%]$ZrB_2$ and SiC+25[vol.%]$ZrB_2$ composites are 90.97[%], 74.62[%], 77.99[%] and 72.61[%] respectively. The XRD phase analysis of the electroconductive SiC ceramic composites reveals high of SiC and $ZrB_2$ and low of ZrO2 phase. The electrical resistivity of mono SiC, SiC+15[vol.%]$ZrB_2$, SiC+20[vol.%]$ZrB_2$ and SiC+25[vol.%]$ZrB_2$ composites are $4.57{\times}10^{-1}$, $2.13{\times}10^{-1}$, $1.53{\times}10^{-1}$ and $6.37{\times}10^{-2}[{\Omega}{\cdot}cm]$ at room temperature, respectively. The electrical resistivity of mono SiC, SiC+15[vol.%]$ZrB_2$, SiC+20[vol.%]$ZrB_2$ and SiC+25[vol.%]$ZrB_2$ are Negative Temperature Coefficient Resistance(hereafter, NTCR) in temperature ranges from 25[$^{\circ}C$] to 100[$^{\circ}C$]. It is convinced that SiC+20[vol.%]$ZrB_2$ composite by SPS can be applied for heater above 1000[$^{\circ}C$].

• 한국세라믹학회지
• /
• 제40권2호
• /
• pp.128-131
• /
• 2003

B$_4$C 분말 표면을 알루미나 전구체로 표면 개질하여 알루미늄의 wetting 각을 낮추어 알루미늄의 함침을 용이하게 함으로써 상압에서 B$_4$C/Al 복합체를 제조하고자하였다. 알루미나 전구체에 의한 표면개질은 제타전위의 변화로 확인하였으며, 표면개질된 B$_4$C 분말의 preform에 Al 6061 디스크를 올려놓고 흐르는 알곤 분위기에서 103$0^{\circ}C$/20분 열처리로 Al이 완전히 함침된 B$_4$C/Al 복합체를 제조하였다. 반면 표면 개질되지 않은 B$_4$C 분말은 125$0^{\circ}C$/30분에도 함침이 일어나지 않았다. 이 복합체의 XRD와 SEM 분석은 B$_4$C. Al 외에도 반응상 $Al_3$BC 상이 생성되었으며, 물성을 크게 저하시키는 A1$_4$C$_3$는 생기지 않았음을 보여 주었다.

• 기술혁신학회지
• /
• 제1권3호
• /
• pp.402-418
• /
• 1998

This study attempts to analysis of the 1'ole and B/C(Benefict/Cost)of National Supported Supercomputing Center in process of the promotion for informatization in Korea. ETRI Supercomputing Center, as National Supported Supercomputing Center, was established in 1967 as a laboratory of KIST(Korea Institute of Science and Technology). ETRI Supercomputer Center have acted a leading role as National HPCC(High Performance Computing and Communication) in Korea. The result of B/C analysis of En Supercomputer Center showed that it is twenty times benefit as many as cost for the last 30 years. As soon as possible, it was Suggested that ETRI Supercomputer Center must be developed as National Supercomputing Center(NSC).

• Journal of Ecology and Environment
• /
• 제40권2호
• /
• pp.84-88
• /
• 2016

To understand the effects of habitat characteristics on the genetic diversity of Persicaria thunbergii, three sites of different environmental conditions in a water system were surveyed. Site A was the closest to the source of the water system, and there was a dam between sites A and B. Site C is located on the lowest downstream in the water system. Vegetation survey of four quadrats at each site was performed, and soil samples were collected for physicochemical analysis. Random amplification of polymorphic DNA (RAPD) analysis of ten P. thunbergii individuals at each site was conducted to calculate population genetic diversity and genetic distance among populations. Soil was sterile sand at site A, whereas loamy soil at sites B and C. A pure stand of P. thunbergii appeared at site A, while other species occurred together (such as Humulus japonicus and Phragmites australis) at sites B (Shannon-Wiener index; $H_B=0.309$) and C ($H_C=0.299$). Similar to the species diversity, genetic diversity (Nei's gene diversity; h) within population of site A ($h_A=0.2381$) was relatively lower than sites B ($h_B=0.2761$) and C ($h_C=0.2618$). However, site C was separated from sites A and B in genetic distance rather than the geographical distance (Nei's genetic distance; A~B, 0.0338; B~C, 0.0685; A~C, 0.0833).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1289-1290
• /
• 2007

The composites were fabricated 61Vo.% ${\beta}$-SiC and 39Vol.% $TiB_2$ powders with the liquid forming additives of 12wt% $Al_{2}O_{3}+Y_{2}O_{3}$ as a sintering aid by pressure or pressureless annealing at $1650^{\circ}C$ for 4 hours. The present study investigated the influence of annealed sintering on the microstructure and mechanical of SiC-$TiB_2$ electroconductmive ceramic composites. Reactions between SiC and transition metal $TiB_2$ were not observed in the microstructure and the phase analysis of the SiC-$TiB_2$ electroconductive ceramic composites. Phase analysis of SiC-$TiB_2$ composites by XRD revealed mostly of ${\alpha}$-SiC(6H), $TiB_2$, and In Situ YAG($Al_{5}Y_{3}O_{12}$). The relative density, the flexural strength, the Young's modulus showed the highest value of 86.69[%], 136.43[MPa], 52.82[GPa] for pressure annealed SiC-$TiB_2$ ceramic composites.

• 상하수도학회지
• /
• 제26권4호
• /
• pp.565-578
• /
• 2012

Integrated watershed sewage works program(IWSWP) is defined as implementing, by one of local governments or central government, sewage facilities planning, installation and management for a certain watershed in which criteria of water quality is established and two or more local governments are involved. It is shown that IWSWP is more efficient for the improvement of water quality of water body than conventional local sewage works program(CLSWP) and besides, economical benefits can be achieved by integration of facilities and M&O. In this research, case study for 8 watershed area were investigated to evaluate the difference of effect between IWSWP and CLSWP. The research shows that IWSWP has the money saving result of approximately 12 % by cost reduction for sewage works investment. B/C analysis result shows that B/C ratio of IWSWP was 1.749 and it is higher than B/C ratio of 1.439 for CLSWP. At the same time, the B/C sensitivity analysis is carried out for the rate of discount and the recreational use benefit.

• 한국언어정보학회지:언어와정보
• /
• 제9권2호
• /
• pp.69-83
• /
• 2005

This paper discusses the distribution of a null complementizer C, as opposed to an overt counterpart 'that', presenting empirical support both for and against the PF-merge analysis of C proposed by Boscovic and Lasnik (2003, henceafter B&L) who in turn attribute to the proposal in Pesetsky (1992) and Halle & Marantz (1993). In Section I, as a background, I discuss B&L's proposal that a null complementizer C is a PF-affix which undergoes a PF-merger operation at the PF component. In Section 2, after a brief sketch of the distribution of a null C mostly in bare-relatives, I explore the possibility of extending B&L's analysis to accomodate the null C's in the bare-relative constructions. In Section 3, I argue that despite some empirical difficulties, B&L's analysis of a null C as a PF-affix can still be maintained, if Adverb Fronting is an operation to Spec-C position. Furthermore, I propose a rule - PF Spell-Out Constraint - to account for the C-trace (i.e. that-trace) effect in relative constructions. With the PF Spell-Out Constraint and B&L's PF-merge account, the distribution of a null C can better be analyzed.

• 치위생과학회지
• /
• 제22권3호
• /
• pp.156-163
• /
• 2022

Background: This study attempted to apply resin infiltrant (RI) as a method to maintain the effect of tooth bleaching treatment and compared it with fluoride varnish (FV) or artificial saliva to evaluate the effect. Methods: Sixty healthy lozenge specimens were classified into five groups. Group 1 was the negative control group, and discoloration was induced after artificial saliva treatment of the tooth specimen (G1_S+C). Group 2 was a positive control group, in which pigmentation was induced after bleaching treatment and artificial saliva treatment (G2 _B+S+C). Coloration was induced in group 3 (experimental group 1) after bleaching treatment and artificial saliva treatment, followed by application of fluorine varnish (G3_B+FV+S+C). Coloration was induced in Group 4 (experimental group 2) after applying RI after bleaching treatment and artificial saliva treatment (G4_B+RI+S+C). Pigmentation was induced in group 5 (experimental group 3) after bleaching treatment and artificial saliva treatment, followed by acid treatment (etching) and treatment with RI (G5_B+E+RI+S+C). Coffee and wine were used to induce discoloration. The lightness value (L^*) of the CIE L^*a^*b^* color system was obtained by image analysis. Kruskal-Wallis H analysis was performed for the mean difference in L^* values by group. Results: When coloration was induced with coffee, there was no significant difference in L^* value between artificial saliva (G2 _B+S+C), FV (G3_B+FV+S+C), and RI (G4_B+RI+S+C, G5_B+E+RI+S+C) groups. There was no significant difference in L^* values between the artificial saliva (G2 _B+S+C), FV (G3_B+FV+S+C), and RI (G4_B+RI+S+C, G5_B+E+RI+S+C) groups, even in the case of wine induced coloration. Conclusion: It was confirmed that artificial saliva or RI treatment had similar effects to the FV previously used to maintain the effect of tooth bleaching treatment.