• 한국정보전자통신기술학회논문지
• /
• 제15권5호
• /
• pp.335-342
• /
• 2022

본 논문에서는 오디오 애플리케이션을 위한 단일 비트 3차 피드포워드 델타 시그마 변조기를 제안한다. 제안된 변조기는 저전압 및 저전력 애플리케이션을 위한 클래스-C 인버터를 기반으로 한다. 고정밀 요구 사항을 위해 레귤레이티드 캐스코드 구조의 클래스-C 인버터는 DC 이득을 증가시키고 저전압 서브쓰레스홀드 증폭기 역할을 한다. 제안된 클래스-C 인버터 기반 변조기는 180nm CMOS 공정으로 설계 및 시뮬레이션되었다. 성능 손실이 없으면서 낮은 공급 전압 호환성을 가지도록 제안된 클래스-C 인버터 기반 스위치드 커패시터 변조기는 높은 전력 효율을 달성하였다. 본 설계는 20kHz의 신호 대역폭 및 4MHz의 샘플링 주파수에서 동작시켜 93.9dB의 SNDR, 108dB의 SNR, 102dB의 SFDR 및 102dB의 DR를 달성하면서 0.8V 전원 전압에서 280μW의 전력 소비만 사용한다.

• Journal of electromagnetic engineering and science
• /
• 제13권1호
• /
• pp.44-50
• /
• 2013

In this paper, we present a circularly polarized (CP) composite cavity-backed crossed dipole antenna for global positioning system (GPS) applications. We produce the CP radiation by crossing two dipoles through a $90^{\circ}$ phase delay line of a vacant-quarter printed ring, which also has a broadband impedance matching characteristic. Two techniques, insertion of meander lines in the dipole arm and arrowhead-shaped trace at its end, are employed to reduce the sizes of the primary radiation element. The compact radiator is backed by a cavity reflector to achieve a wide CP radiation beamwidth. The proposed antenna exhibits a measured bandwidth of 1.450~1.656 GHz for a voltage standing wave ratio (VSWR) < 2 and 1.555~1.605 GHz for AR < 3-dB. At 1.575 GHz, the antenna has a gain of 7 dBic, a frontto-back ratio of 27 dB, AR of 1.18 dB, and 3-dB AR beamwidths of $130^{\circ}$ and $132^{\circ}$ in the x-z and y-z planes, respectively.

• 약학회지
• /
• 제42권5호
• /
• pp.487-493
• /
• 1998

In the previous study we described the antitumor effect of GLB, a protein-polysaccharide fraction separated from the growing tips of Ganoderma lucidum, against sarcoma 18 0 solid tumor in ICR mice. In this study, we separated an acidic protein-polysaccharide fraction, GLB-A, and a basic protein-polyaccharide fraction, GLB-B, from GLB by differential precipitation, and elucidated their antitumor and immunomodulatory activities. When ip injected at the dose of 50mg/kg/day into the ICR mice, GLB-A and GLB-B inhibited the growth of ip implantated sarcoma 180 cells by 32.4% and 21.0%, respectively. Of these, GLB-A increased the % lymphoblast in the spleen of the tumor-bearing and the normal mice by 20.9% and 123.0%, and the CD4/CD8 ratio by 73.3% and 22.4%, respectively. GLB-A also increased the expression of CD25 (IL-2 receptor alpha ch0ain) in normal mice by 82.0%. These results strongly suggest that GLB-A is a promising candidate for antitumor immunomodulatory medicine.

• Journal of Plant Biotechnology
• /
• 제7권1호
• /
• pp.27-35
• /
• 2005

Eighty-five different cultivars of Brassica rapa, B. juncea, B. nap us, B. carinata, B. oleracea and hexaploid Brassica collected from Bangladesh, Japan, China and Denmark were analyzed by SDS-PAGE for seed and leaf protein variations, using esterase, acid phosphatase and peroxidase isozyme analysis. Ten polymorphic bands were identified from seed protein however no identifiable polymorphic band was found in the leaf protein. Polymorphic markers clearly distinguished the different Brassica species as well as yellow sarson (YS) and brown seeded (BS) cultivars of B. rapa. The $F_1$ cross between YS and brown seeded cultivars showed the existance of all poly-morphic bands of the respective parents. The Bangla-deshi and Japanese cultivars of B. rapa differed in the amount of seed protein. In the case of isozyme analysis, esterase showed the highest number of polymorphic bands (13) followed by acid phosphatase (9) and peroxidase (5). These polymorphic markers were very effec-tive for classification of all the species studied in this experiment. In parentage tests using isozymes, the hybridity of intra-and-interspecific crosses of almost all the seedlings could be identified from their respective cross combinations. Esterase polymorphism showed a clear differentiation between YS and BS types of B. rapa. In addition, two esterase polymorphic markers were iden ified to differentiate some cultivars of B. juncea. Segregation patterns in these two esterase bands showed a simple Mendelian monohybrid ratio of 3:1 in $F_2$, 1:1 in test cross and 1:0 in back cross progenies. No polymorphic band was identified to distinguish different cultivars of the same species by acid phosphatase or peroxidase. Polymerase Chain Reaction (PCR) was carried out with seed coat color specific marker of B. juncea. The yellow seeded cultivars produced a strong band at 0.5 kb and weak band 1.2 kb. In the addition of these two specific bands, Japanese yellow-seeded cultivars expressed two more weak bands at 1.0 kb and 1.1 kb. Where the brown seeded cultivars generated a single strong band at 1.1 kb. In segregating population, the yellow seed coat color marker segregated at a ratio 15 (brown) : 1 (yellow), indicating the digenic inheritance pattern of the trait.

• 대한기계학회논문집B
• /
• 제32권1호
• /
• pp.39-46
• /
• 2008

The loss coefficient of the butterfly valve which allows partial opening of the valve at closed position and is applicable to the small-sized pipe system with the diameter of 1 inch was measured for the variation of the valve disk blockage ratio. Two different types of the valve disk configuration to adjust the blockage ratio were considered. One was the solid type valve disk of which the diameter was changed into the smaller size rather than the pipe diameter, and the other was the perforate type valve disk on which some holes were perforated. The results from two types of valve disk were compared to identify their characteristics in the loss coefficient distributions. The loss coefficient and the controllable angle of the valve disk were decreased exponentially with the decrease of the blockage ratio. In addition, the perforate valve disk had the effect on the higher loss coefficient rather than the solid type valve disk.

• 대한기계학회논문집B
• /
• 제34권9호
• /
• pp.835-841
• /
• 2010

MEMS 가스터빈 엔진에서 연료와 공기의 혼합에 영향을 미치는 중요한 요소중 하나는 연료 분사구 형상의 설계이다. 본 연구에서는 3 개의 연료 주입부와 각 주입부에 연결된 여러 개의 분사구에 의해 연료와 공기가 혼합되는 시스템을 고려하여 분사구의 배열과 연료 공급비율의 변화에 따른 혼합 정도를 당량비를 통하여 정량적으로 해석하였다.

• 한국건축시공학회지
• /
• 제5권2호
• /
• pp.153-159
• /
• 2005

This study is to choose the optimal mixture and to analyze the sensibility properties of High strength concrete and mass concrete to apply the high rising building. The main experimental variables were water/binder ratio $39\%,\;33\%,\;35\%\;and\;37\%$, replacement ratio of fly ash $5\%,\;10\%\;and\;15\%$, in the high strength concrete and water/binder ratio $39\%,\;41\%\;and\;43\%$, replacement ratio of fly ash $10\%,\;20\%\;and\;30\%$, in the man concrete. According to the test results, the principal conclusions are summarized as follows. 1) The slump(or slump flow) and air content of fresh concrete were found to be the highest in the elapsed time 30 minutes. 2) The optimal mixture conditions are W/B $40\%$, FA $25\%$ in the mass concrete and W/B $33.4\%$, FA $15\%$ in the high strength concrete. 3) The ranges of sensibility are satisfied in the moisture content ${\pm}l\%\;and\;S/a\;{\pm}2\%$.

• Journal of Astronomy and Space Sciences
• /
• 제26권1호
• /
• pp.1-8
• /
• 2009

질량비가 작은 접촉쌍성 FP Boo를 3색(B, V, R) CCD 측광관측하여 새로운 광도곡선을 얻었으며, Rucinski et al.(2005)의 시선속도곡선과 함께 Wilson-Devinney 프로그램에 적용하여 FP Boo의 새로운 측광학적 해와 절대물리량을 구하였다. FP Boo를 포함한 24개의 질량비가 작은 접촉쌍성의 H-R도로부터 FP Boo의 진화 상태도 일반적인 질량비가 작은 접촉쌍성의 진화 상태와 일치하는 위치에 놓이고 있음을 다시 확인하였다. 이번 관측을 통하여 얻은 우리의 광도곡선에서는 작지만 약간의 비대칭성을 보였다.

• 대한기계학회논문집B
• /
• 제21권5호
• /
• pp.602-614
• /
• 1997

In order to evaluate the effects of equivalence ratio, initial pressure and temperature on the laminar flame propagation process, and combustion radicals characteristics, experimental approaches are carried out in methane-air premixture using a constant volume chamber. Local and average radical intensities were measured to determine the time and spatial correlations between each radicals; C $H^{*}$(431 nm), $C_{2}$$^{*}$ (517 nm) and O $H^{*}$(309 nm) . The results are showed that two kinds of equation were proposed for the cases of continuous flame and intermittent flame type to evaluate actual equivalence ratio using relative intensities with each radicals. Both equations were agreed with actual equivalence ratio within 10% errors range. And schlieren photo and CCD image were compared with flame sizes at equivalence ratio 1.0.o 1.0.

• 대한기계학회논문집B
• /
• 제33권7호
• /
• pp.495-505
• /
• 2009

A two-dimensional circular cylinder freely falling in a channel has been simulated by using immersed boundary - lattice Boltzmann method (IB-LBM) in order to analyze the characteristics of motion originated by the interaction between the fluid flow and the cylinder. The wide range of the solid/fluid density ratio has been considered to identify the effect of the solid/fluid density ratio on the motion characteristics such as the falling time, the transverse force and the trajectory in the streamwise and transverse directions. In addition, the effect of the gap between the cylinder and the wall on the motion of a two-dimensional freely falling circular cylinder has been revealed by taking into account a various range of the gap size. As the cylinder is close to the wall at the initial dropping position, vortex shedding in the wake occurs early since the shear flow formed in the spacing between the cylinder and the wall drives flow instabilities from the initial stage of freely falling. In order to consider the characteristics of transverse motion of the cylinder in the initial stage of freely falling, quantitative information about the cylinder motion variables such as the transverse force, trajectory and settling time has been investigate.