제당폐수를 산 또는 알카리 전 처리한 후 생물학적 수소생산율과 유기산의 생성특성을 평가하였다. 제당 폐수의 수소발생량은 산 전처리된 경우 보다 알칼리 전처리된 시료에서 약 70%의 발생량 증가를 나타내었다. 또한 제당폐수 원액에 적절한 영양염류(질소 인)를 공급하였을 때 보다 양호한 수소생성률을 보여주었다. 제당폐수의 혐기발효에 있어서 탄수화물의 분해와 수소생성의 직접적인 연관성은 나타나지 않았다. Butyric acid/Acetic acid (B/A)비와 수소생산의 연관성을 살펴보았을 때, 영양염류를 첨가한 제당폐수는 순수 제당폐수보다 B/A비가 약 3배 증가하였으며 알카리 전처리와 영양염류를 첨가한 시료에서 B/A비가 4.02로 가장 높게 나타났다. 실험에 사용된 전체 시료에서 B/A비가 클수록 수소생성률이 높았다.
Journal of electromagnetic engineering and science
/
제7권2호
/
pp.83-90
/
2007
In this paper, the formulation of the protection ratio based upon a composite fade margin and availability is newly presented for the detailed planning of frequency coordination in the microwave relay system network, and computed results for co-channel and adjacent channel protection ratios are illustrated over an actual system with 6.2 GHz. It is shown that the protection ratio to assure a quality of service can be expressed in terms of the composite fade margin, noise-to-interference ratio, net filter discrimination, and system parameters. In addition, the net filter discrimination, depending upon the transmitter spectrum mask and the overall receiver filter characteristic, has been examined to investigate the effect of the adjacent channel protection ratio caused by the adjacent channel interference. Regarding simulated results for 6.2 GHz, 60 km, 64-QAM, and N/I=6 dB at the bit error rate of $10^{-6}$, composite fade margin and co-channel protection ratio yield 25.14 and 50.3 dB, respectively. Also, the net filter discrimination of 26.5 dB and the adjacent channel protection ratio of 23.8 dB are obtained at the first adjacent channel of 30 MHz. The proposed method provides some merits in view of a comprehensive and practical application with more detailed and various system parameters needed to access the criteria for making the proper frequency coordination.
A composite of TiB2-Al2O3 system was successfully prepared from a mixture of TiO2, B2O3, and Al by self-propagating high temperature synthesis (SHS) with a novel characteristic, utilizing the internal oxidation heat of aluminium metal of the mixture, instead of by a conventional technique, externally heating a mixture of Ti, B and Al2O3. From a mixture with B/Ti molar ratio of =2.0, pure two phases of TiB2 and $\alpha$-Al2O3 with good crystallinity and small, uniform sizes were formed. However, when the B/Ti molar ratio of the mixture goes to a value less than 2.0, in addition to the above main minerals, a small smounts of metastable phases such as TiB and Ti3B4 were formed. It was found that about 60%, the optimum green density of compacts gave their highest reaction rate and temperature during SHS process. TiB2-Al2O3 system composite with B/Ti molar ratio of =2.0 could be pressurelessly sintered even at 190$0^{\circ}C$ under Ar gas flows without any addition of sintering aids, showing their good properties such as 91.2% in relative density, 2750 kgf/$\textrm{mm}^2$ in Vickers hardness and 2620 kgf/$\textrm{cm}^2$ in flexural strength.
Catalytic iminohydroacylation has been achieved by the reaction of aldimine 1 and 1,5-hexadiene (2a) with Wilkinson's complex as catalyst. Compounds 7a, 8a and 9a were obtained as final product after hydrolysis of the resulting iminohydroacylation products 4a, 5a and 6a. Depending on the reactant ratio (2/1), the ratio of products were changed dramatically : As the 2/1 ratio was increased, 7a is the major product after hydrolysis while 8a is the major with an 1/1 ratio of 2/1. The mechanism of the formation of 5a is determined by the reaction of 1 and 2b under the identical reaction conditions. Considering that 5a may not be formed from the hydroiminoacylation of 14a since 5b cannot be formed from that of conjugate diene 14b generated from isomerization of 2b, 5a must be formed from the reaction of 4a and 10 by addition-elimination mechanism.
TM data, which have better resolution in spatial and spectral than MSS data, were used for this study, and several Image Processing Techniques (IPT) were examined for finding the best IPT to fit to lineament extraction and mineralized zone mapping. The Ryeongnam area was selected as test area, because the area is one of major mineralized zones in Korea and its hydrothermal alteration zone is wider and deeper than other areas. The spatial filtering method is most optimum one for limeament extraction: that is, the directional spatial filtering is most efficient to detect N-S, E-W direction lineaments on the image, and the high boost filtering can be applied for mapping all direction lineaments. The ratio method was selected for detecting altered zone. It is possible to make several tens combinations in ratio with 7 bands of TM data, but considering spectral characteristics of each band of TM to the geological meterials and vegetation, the band 4/band 3(A), band 5/band 7(B), and B/A ratio methods were chosen among them. The 5/7 ratio image did not show clearly the altered area due to noise from vegetation cover, so the 4/3 ratio imae was used for trying to decrease the effect of vegetation. As a result the B/A ratio image showed quite nicely the altered zone of the test area. In conclusion, the spatial filtering is the best image processing techniques for lineament mapping, and the B/A ratio image in TM data is useful for the mineralized zone mapping.
Porphyrins generally bind DNA in two different ways with respect to the mixing ratio; monomeric binding at a low mixing ratio and outside stacking at a high mixing ratio. In the present study, CTDNA binding property of a planar structured porphyrin, 5,10,15,20-tetrakis(N-methyl-4-pyridin-4-yl-phenyl)porphyrin (referred to as B-TMPyP) was investigated using absorption, CD, LD, and $LD^r$ spectroscopies. B-TMPyP produced a bisignate CD band, even at the lowest mixing ratio, indicating that B-TMPyP may not have a monomeric binding mode. From the observations of the spectral changes to the absorption, CD, and LD spectra in mixing ratio dependent titrations, B-TMPyP seems to have a quite different stacking type compared to that for the binding of $H_2$TMPyP. Moreover, B-TMPyP produced a CD band of opposite shape in the Soret band region. A qualitative explanation for the observed optical differences is also given.
본 연구에서는 화산재 기반 지오폴리머의 최적배합을 도출하기 위하여 유동성, 응결 및 압축강도를 분석하였다. 알칼리 활성화제로 $Na2SiO_3$와 NaOH를 사용하였고, NaOH는 2, 4, 6, 8M을 사용하였으며, A/B 비는 0.25, 0.3, 0.35, 0.4, 0.45, 화산재와 고로슬래그의 결합재 비는 7:3, 6:4, 5:5를 사용하여 진행하였다. 상기의 실험 결과, NaOH의 몰농도가 증가할수록 유동성은 떨어지고, 응결시간은 짧아졌으며, 압축강도는 증가하여 NaOH의 최적 몰농도는 4M인 것으로 나타났다. A/B 비의 변화에 따른 특성도 검토하였는데 A/B 비가 증가할수록 응결시간은 짧아지는 경향을 보였고, 압축강도 발현은 높은 것으로 나타났지만 응결시간의 확보와 압축강도 발현에 유리한 A/B 비는 0.35인 것으로 확인되었다. 화산재의 비율이 증가할수록 응결시간이 길어지는 것으로 확인되었고, 강도발현에는 불리한 것으로 나타났으며, 실험 결과를 종합했을 때, 6:4의 결합재비를 사용하는 것이 응결과 압축강도에 가장 적합한 것으로 판단된다. 따라서, 화산재 기반 지오폴리머는 NaOH 4M을 사용하고, A/B 비는 0.35, 결합재 비는 6:4를 사용하는 것이 유동성, 응결시간 확보 및 압축강도 발현에 적정할 것으로 판단된다.
KSII Transactions on Internet and Information Systems (TIIS)
/
제11권12호
/
pp.6188-6204
/
2017
Over the years, more password-based authentication key agreement schemes using chaotic maps were susceptible to attack by off-line password guess attack. This work approaches this problem by a new method--new theorem of chaotic maps: $T_{a+b}(X)+T_{a-b}(X)=2T_a(X)T_b(X)$,(a>b). In fact, this method can be used to design two-party, three-party, even in N-party intelligently. For the sake of brevity and readability, only a two-party instance: a novel Two-party Password-Authenticated Key Agreement Protocol is proposed for resisting password guess attack in this work. Compared with the related literatures recently, our proposed scheme can be not only own high efficiency and unique functionality, but is also robust to various attacks and achieves perfect forward secrecy. For capturing improved ratio of security and efficiency intuitively, the paper firstly proposes a new parameter called security/efficiency ratio(S/E Ratio). The higher the value of the S/E Ratio, the better it is. Finally, we give the security proof and the efficiency analysis of our proposed scheme.
본 연구에서는 3D 프린팅 공법 적용을 위한 콘크리트 기초 레올로지 분석을 목적으로 실험을 수행하였다. 콘크리트 구성성분 중 유동특성에 큰 영향을 미치는 인자(W/B, binder Type, replacement ratio, super plasticizer dosage)의 변화에 의한 레올로지 특성(rheological properties)을 실험적으로 분석하였다. 실험은 페이스트와 모르타르 크게 두 가지 인자로 구분하여 수행하였다. 페이스트 실험에서는 W/B, binder type, replacement ratio, super plasticizer dosage를 주요 변수로 설정하여 레올로지를 분석했다. 모르타르 실험에서는 W/B와 sand ratio에 따른 레올로지 특성을 분석했다. 결과적으로 W/B가 증가될수록 viscosity가 감소하였으며, FA를 치환할 FA 비율이 증가됨과 함께 viscosity가 증가하였다. 유동성 증가를 위해서는 SF를 5%만 치환해도 shear stress를 감소시키며 viscosity는 약 83%까지 감소되었다. 모르타르 레올로지 평가를 통해 W/B 30~40% 구간에서 큰 폭의 변화가 일어나는 임계치 구간이 존재하는 것으로 분석됐다. 또한 동일 W/B 내에서는 sand 비가 50~60% 구간에서 shear stress가 두 배 이상 증가하는 임계 구간이 존재하는 것으로 분석됐다.
탄성포장은 보행자의 만족감이 매우 높아 수요가 지속적으로 증가할 것으로 예상되나, 탄성포장의 재료 배합기준 즉, 합성고무 칩(EPDM chip)과 폴리우레탄 바인더의 적정배합기준이 미비하여 시공 시 많은 시행착오를 겪고 있는 실정이다. 따라서, 본 연구는 조경용 탄성포장의 폴리우레탄 바인더 배합비에 따른 결합력과 반발탄성의 변화를 실험을 통해 분석하고, 이를 바탕으로 적정한 재료배합 비율을 제시하고자 하였으며, 실험결과는 다음과 같다. 인장실험에서는 시료 B와 시료 C가 바인더 배합비율과 인장강도 간에 강한 양의 상관관계가 있는 것으로 나타나, 배합비율이 증가하면 인장강도가 증가한다는 것을 알 수 있다. 경도실험에서는 시료 A,시료 B,시료 C모두 바인더 배합비율과 경도 간에 통계적으로 상관관계가 없는 것으로 나타나, 탄성포장재의 경도는 바인더의 배합비율에 따라 달라지지는 않는 것으로 판단된다. 반발탄성실험에서는 시료 A와 시료 B가 배합비율과 반발탄성 간에 강한 음의 상관관계가 있는 것으로 나타나, 배합비율이 증가하면 반발탄성이 낮아진다는 것을 알 수 있다. 실험결과를 바탕으로 적정배합비율을 분석해 보면 인장강도의 경우, 인장강도의 증가가 둔화되거나 오히려 감소하는 배합비율 포인트는 20%이며, 반발탄성의 경우, 반발탄성이 급격하게 감소하는 배합비율 포인트는 22%이다. 따라서 두가지 요인을 감안할 때, 적정 배합비는 20~22% 사이로 판단된다. 본 연구의 결과는 조경용 탄성포장 시공 시 결합력과 탄성을 제고할 수 있는 재료배합의 지침을 제공할 수 있을 것으로 기대된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.