• Journal of Practical Agriculture & Fisheries Research
• /
• v.9 no.1
• /
• pp.47-58
• /
• 2007

New Wild Grape berry weighs approximately 3.7g, which is one fourth of the weight of the general grape wine (12.2g). The pH of New Wild Grape wine is around 3.34, which is lower by 0.3 than that (3.62) of general grape wine. It contains higher organic acids, so it has stronger sour taste. The sugar content of New Wild Grape is 17° Brix, which is higher than that (15° Brix) of general grape wine. The color of New Wild Grape is blackish, owing to the lower lightness, redness, and yellowness compared with those of general grape wine. Depending on the mixing with or without oak tree, there is little difference in the pH, organic acid, reducing sugar, and amount of alcohol after ripening for 1 year. In taste, New Wild Grape wine mixing with oak tree is evaluated better than that of the wine without oak tree. Especially, in the case of the wine mixing with oak tree's sawdust, the quality in color, taste, and smell became improved. After fermentation, the pH of New Wild Grape Wine ripened with oak tree charcoal increased from 3.82 to 3.86, as it gets more oak tree charcoal, and the organic acid decreased from 0.91㎖ to 0.86㎖. However, there is no difference in alcohol amount. Lightness in color tended to be reduced, whereas redness tended to be increased. Adding 3% of oak tree charcoal made the taste and smell improved. When fermenting New Wild Grape Wine with mixing 1% of oak tree's sawdust or 3% of oak tree charcoal, there is little difference in the pH and the organic acid, whereas there is a little difference in those of New Wild Grape Wine without addition of oak tree charcoal. As the addition of oak tree charcoal increased, the lightness and redness became higher. When fermenting New Wild Grape Wine with mixing 1% of oak tree's sawdust or 3% of oak tree charcoal in oak tree barre, the taste became improved.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.11 no.1
• /
• pp.79-94
• /
• 2009

The research project was conducted to develop a paper bagging machine for grape. This technology was aimed to highly reduce a labor for paper bagging in grape and bakery. In agriculture labor and farm population has rapidly decreased since 1980 in Korea so there was so limit in labor. In particular there is highly population in women and old age at rural area and thus labor cost is so high. Therefore a labor saving technology in agricultural sector might be needed to be replaced these old age with mechanical and labor saving tool in agriculture. The following was summarized of the research results for development of a paper bagging machine for grape. 1. Development of a new paper bagging machine for grape - This machine was designed by CATIA VI2/AUTO CAD2000 programme. - A paper bagging machine was mechanically binded a paper bag of grape which should be light and small size. This machine would be designed for women and old age with convenience during bagging work at the field site. - This machine was manufactured with total weight of less than 350g. - An overage bagging operation was more than 99% at the actual field process. - A paper bagging machine was designed with cartridge type which would be easily operated between rows and grape branches under field condition. - The type of cartridge pin was designed as a C-ring type with the length of 500mm which was good for bagging both grape and bakery. - In particular this machine was developed to easily operated among vines of the grape trees. 2. Field trials of a paper bagging machine in grape - There was high in grape quality as compared to the untreated control at the application of paper bagging machine. - The efficiency of paper bagging machine was 102% which was alternative tool for the conventional. - The roll pin of paper bagging machine was good with 5.3cm in terms of bagging precision. - There was no in grape quality between the paper bagging machine and the conventional method. - Disease infection and grape break was not in difference both treatments.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.4 no.1
• /
• pp.119-127
• /
• 2002

This study was conducted to develop the heat exchanger by utilizing the heat energy of underground water(15℃), which might be used for cooling and heating system of the agricultural facilities. We developed the heat exchanger, parallel type plat fin tube made of Aluminum(Al 6063), which was named Aloo-Heat(No. of The registration design : 0247164, by Korean Intellectual property Office). The fin of exchanger was design of the granulated surface for minimizing fouling factor and dew forms, and also placed parallel to the tube in order to minimized the resistance of flows. 1. Aloo-heat was designed to have 0.03m for inside diameter, 0.036m for outside diameter of tube, 0.0012m for thickness of fin and 0.032m for length of plat fin. 2. t was also designed to have 1.5248m²/m for outside area of heat transfer, 0.0942m²/m for inside area contacting hot liquid, and the ratio (Ra) was 16.1869. 3. Efficiency of the fin was 93 percentage when fin length was 0.032m, and the fin thickness satisfied equation $\frac{h{\rho}}{k}$< 0.2 when it was 0.0012m. 4. According to the performance test of Aloo-heat, as the temperature and rate increased, the heating value also increased, heating value was 504kJ/h·m and 6,048kJ/h·m when it was 60℃, 10 𝑙/min and 80℃, 40 𝑙/min respectively. 5. The test of heating value was confident, because correlation value(R²) was 0.9898 for the temperature and 0.9721 for flow rate of hot liquid, respectively.

• (The) Research of the performance art and culture
• /
• no.39
• /
• pp.801-833
• /
• 2019

This article has reviewed on the characteristics of the Beompae (Buddhist chanting) performed by Gyeongjaeeosan Wonmyeongchang(唱) based on the result of musical style of Gyeongjae Anchaebi-sori as defined under the previous studies. And, through the comparison with the Beompae performed by Songam-chang (唱), a same type of musical piece, it contemplates on musical differences between the two singers. Results of the study are shown as follows. of Gyeongjaeeosan Seolhoeinyu-pyeon and of Socheongsaja-pyeon are sunged as Yuchi-Seong(聲) among Anchaebi-sori. 'main melody type' and 'ending type' are generally similar to the musical characteristics of the Yuchi-Seong(聲), and the differences between the two singers are detected from main melody type D and ending type b. In particular, under of Socheongsaja-pyeon, only the type a is detected among the two types. becouse ending note of ending-type 'a' is ended with 'sol'. The basic frame of the Jjaimsae(musical form) has been clarified in the previous studies that the Jjaimsae of Yuchi-Seong(聲) has been maintained just the way it is. However, even for the same Seong(聲), the combination of the 'main melody type' of passage has not been unified, and depending on the musical piece, it has been discovered that the combination of the 'main melody type' has been diversely organized. of Gyeongjaeeosan Bongsongsajapyeon belongs to Pyeon-gae-seong(聲) broadly from the Anchaebi-sori and it is shown to be So-seong(聲) in details. In particular, in the previous studies, the 'ending melody' of So-seong(聲) and the closing melody of were similar with a slight difference for the 'ending melody'. Such a difference is relation to the characteristics for sequentially descending melody of Wonmyeong-chang(唱). The 'Jjaimsae(The musical structure)' is not much different from the previous studies, and the 'yeok-eum(weaving lyrics)' of Songam-chang(唱) has strong tendency of 3-sobak rhythm while the Wonmyeong-chang (唱) is shown the tendency of 2-sobak rhythm in general for the difference.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.26 no.1
• /
• pp.32-39
• /
• 1981

In order to study the genetic system of the blast resistant varieties, the conidial suspension of mutant races of T-2$^{+t}$, N-2$^{+t}$, C-8$^{+t}$ was inoculated at 4-5 leaf stage by injector for F_2 seedlings from the crosses between seven resistant varieties and four maker lines easily detectable at seedling stage. The results are summarized as follows; 1. The fertility of cross between Semi-dwaf testers and Indica resistant varieties except Carreon was about 74 percents. 2. The segregation modes of resistance varied with varieties and blast races. However, the resistance was expressed as dominance in all cases. Tetep, Tadukan and Carreon showed more complicated segregation for resistance than that of the bred lines. 3. For blast races used, four segregation ratios such as 3:1, 9:7, 13:3 and 37:27 were found in the Tatukan, Tetep, and IR747, and three segregation ratios such as 3:1, 13:3 and 15:1 in the Carreon, and two segregation ratios of 3:1 and 13:3 with Suweon 287, Suweon 288, and Iri342. 4. In the segregation of the resistance to the each races, the ratios of 3:1, 13:3, 15:1 were fitted to T-2$^{+t}$, and the ratios of 3:1, 13:3, 9:7 and 37:27 to N-2$^{+t}$ and C-8$^{+t}$. 5. Suweon 287, Suweon 288 and Iri342 carried one simple dominant gene and inhibitor gene was considered in some cross combinations. Meanwhile Tadukan, Tetep and IR747 seemed to carry one to three resistant genes, and in some cross combinations, the expression of these genes were simple dominant, inhibiting, duplicating and complimentary action. 6. Resistance genes to blast races, T-2$^{+t}$, N-2$^{+t}$ and C-8$^{+t}$ in the Tadukan, Tetep, Carreon, Suweon 287, Suweon 288 and Iri342 were found to be independent with the linkage group of II(lg), VIII(la), XI(bc), and XII(gl).bc), and XII(gl).

• Journal of Korean Society of Forest Science
• /
• v.111 no.4
• /
• pp.473-481
• /
• 2022

Environment-friendly harvesting is practiced to maintain ecosystem, landscape, and forest protection functions. The present study was conducted at Simgok-ri, Sinbuk-myeon, Pocheon, Gyeonngi-do, where a 41-50-year-old Japanese larch forest was harvested in an environment-friendly manner from 2017 to 2019. The dynamics of organic matter in this forest were investigated at three years after the harvest. Specifically, organic matter content was measured on the forest floor and in overstory biomass, litterfall, and soil up to 30 cm in depth from June 2020 to January 2021. Owing to the harvest, the amount of overstory biomass of the Japanese larch stands decreased from 142.22 to 44.20 t ha^-1. On the forest floor, the amount of organic matter was 32.87 t ha^-1 in the control plots and 23.34 t ha^-1 in the harvest plots. Annual litterfall was 4.43 t ha^-1 yr^-1 in the control plots and 1.16 t ha^-1 yr^-1 in the harvest plots. Soil bulk density in the B horizon was 0.97 g cm^-3 in the control plots and 1.06 g cm^-3 i n the harvest plots. Soil organic matter content was 11.5% in the control plots and 12.8% in the harvest plots. The total amount of soil organic matter did not differ significantly between the control plots (245.21 t ha^-1) and harvest plots (263.92 t ha^-1), although the amount of soil organic matter tended to be higher in the harvest plots. The total amount of organic matter in the forest was estimated to be 406.48 t ha^-1 in the control plots and 338.21 t ha^-1 in the harvest plots. In the harvest plots, the ratio of aboveground organic matter decreased to 13.1% and soil organic matter increased to 78.0%, indicating that the distribution of organic matter changed significantly in these plots. Overall, the carbon accumulated in aboveground biomass was substantially reduced by environment-friendly harvesting, whereas the soil carbon level increased, which played a role in mitigating the reduction of system carbon in the forest. These results highlight one possible resolution for forest management in terms of coping with climate change. However, given that only three years of environment-friendly harvesting data were analyzed, further research on the dynamics of organic matter and tree growth is needed.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.491-501
• /
• 2022

Bentonite has been proposed as a buffer and backfill material for high-level radioactive waste repository. Under such repository environment conditions, bentonite is subjected to combined thermal, hydrological, mechanical, and chemical processes. This study evaluates the feasibility of applying X-ray CT technology on the characterization of bentonite under hydration conditions using a newly developed testing cell. The cylindrical cell is made of platic material, with a removable cap to place the sample, enabling to apply vertical pressure on the sample and to measure swelling pressure. The hydration test was carried out with a sample made of Gyeonju bentonite, with a dry density of 1.4 g/cm³, and a water content of 20%. The sample had a diameter of 27.5 mm and a height of 34 mm. During the test, water was injected at a constant pressure of 0.207 MPa, and lasted for 7 days. After one day of hydration, bentonite swelled and filled out the space inside the cell. Moreover, CT histograms showed how the hydration process induced an initial increase and later progressive decrease on the density of the sample. Detailed profiles of the mean CT value, CT standard deviation, and CT gradient provided more details on the hydration process of the sample and showed how the bottom and top regions exhibited a decrease on density while the middle region showed an increase, especially during the first two days of hydration. Later, the differences in CT values with respect to the initial state decreased, and were small at the end of testing. The formation and later reduction of cracks was also characterized through CT scanning.

• Journal of Korean Port Research
• /
• v.6 no.2
• /
• pp.65-92
• /
• 1992

The Korean central government has not appreciate the full extent of the impact of seaports on the national economy. As a consequence port investment has not been given sufficient priority and capacity has failed to keep pace with demand. The principal reason for this failure is the fact that the linkages (or relationships) of the port transport industry with other sectors have not been quantified and fully appreciated. To overcome this dificiency this paper developed a port input-output model to determine the economic impact of the port industry on the national economy. This impact study was conducted by analysing the impact of the Korean port industry upon the national economy from the macroeconomic viewpoint, and identifying the spreading effects of port investments upon the nation's economy. The analysis of the economic impact of the port industry suggests that its contribution to the Korean economy is substantial. What the model shows is, in quantifiable terms, there are the strong economic linkages between the port industry and the other sectors of the national economy. The contribution of the port industry to the Korean economy was summarised in the Conclusion section.

• Korean journal of applied entomology
• /
• v.34 no.4
• /
• pp.360-367
• /
• 1995

The relative toxicity of abamectin was assessed to the predatory mite Amblyseius womersleyi Schicha and to dicofol-resistant and -susceptible twospotted spider mite (TSM) Tetranychus urticae Koch in the laboratory. Abamectin was much les toxic to the predator than to the spider mite. At 0.12 and 0.6 ppm, all TSM adult females of the tow strains were killed within 48 h after dipping n the solutions. The lower concentrations (0.06 and 0.012 ppm) killed more than 77% of TSM female adults of the two strains at 120 h after treatment. However, abmectin did not significantly affect the survival and mobility of A. womersleyi female adults at a concentration of 0.12 ppm but the mortality was slightly increased up to 20~23% at 0.6 and 6 ppm. Abamectin did not significantly affect hatchability of one-day old TSM eggs at 0.06~0.6 ppm. The Four-day old eggs were much more susceptible to abamectin than one-day old eggs were. Within 0.006-6 ppm, abamectin did not affect the hatchability of A. womersleyi eggs and the development of resulting immature predators. When the predator female adults were dipped in 0.6 and 0.12 ppm solution, their reproduction was not affected, but at 6 ppm it was decreased by 35%. However, the reproduction of TSM reduced significantly at concentrations between 0.006 and 0.6 ppm. The differential toxicity of abamectin between TSM and the predator could be of practical importance in managing spider mite populations in the field. Abamectin at selective sublethal concentrations (i.e., 0.012~0.06 ppm) could be of value in adjusting predator/prey ratios in integrated management of spider mites.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.9
• /
• pp.5-16
• /
• 2007

The simple linear elastic-perfectly plastic model with soil parameters $s_u,\;E_u$ and n of undrained condition is usually applied to predict the displacement of a constructed diaphragm wall(DW) on soft soils during excavation. However, the application of this soil model for finite element analysis could not interpret the continued increment of the lateral displacement of the DW for the large and deep excavation area both during the elapsed time without activity of excavation and after finishing excavation. To study the characteristic behaviors of soil behind the DW during the periods without excavation, a series of tests on soft Bangkok clay samples are simulated in the same manner as stress condition of soil elements happening behind diaphragm wall by triaxial tests. Three kinds of triaxial tests are carried out in this research: $K_0$ consolidated undrained compression($CK_0U_C$) and $K_0$ consolidated drained/undrained unloading compression with periodic decrement of horizontal pressure($CK_0DUC$ and $CK_0UUC$). The study shows that the shear strength of series $CK_0DUC$ tests is equal to the residual strength of $CK_0UC$ tests. The Young's modulus determined at each decrement step of the horizontal pressure of soil specimen on $CK_0DUC$ tests decreases with increase in the deviator stress. In addition, the slope of Critical State Line of both $CK_0UC$ and $CK_0DUC$ tests is equal. Moreover, the axial and radial strain rates of each decrement of horizontal pressure step of $CK_0DUC$ tests are established with the function of time, a slope of critical state line and a ratio of deviator and mean effective stress. This study shows that the results of the unloading compression triaxial tests can be used to predict the diaphragm wall deflection during excavation.