• 대한화학회지
• /
• 제61권4호
• /
• pp.163-167
• /
• 2017

백색 LED 기술이 발달함에 따라 적색 형광체는 산업 및 학계에서 점차 중요성이 커지고 있으며, 시장에서 수요는 꾸준히 증가했다. 적색 형광체는 고효율 및 고연색의 LED 조명에 사용된다. 그러나 $Eu^{2+}$ 활성제를 사용한 적색 형광체는 4f-5d 전이로 발생하는 녹색 또는 황색 스펙트럼 영역에서의 강한 재흡수로 인해 백색 LED 칩에서 색상 변경 및 발광 강도의 저하를 유발했다. 이러한 단점이 없고 연색성 지수(CRI)를 더 향상할 수 있는 $Mn^{4+}$ 도핑된 형광체가 현재 매우 중요하다. 그러나 $Mn^{4+}$ 도핑된 형광체는 $^2E_g{\rightarrow}^4A_2$ 전이로 인하여 발광 파장이 모체에 따라 결정된다는 단점이 있다. 본 연구는 동일구조의 $SrGe_4O_9$와 $BaGe_4O_9$ 모체를 합성하여 $Sr_{1-x}B_axGe_4O_9:Mn^{4+}{_{0.005}}$ (x = 0, 0.25, 0.5, 0.75 and 1)를 얻었다. 이로 인해 LED 기술의 다양한 색상 조정이 가능해졌다.

• Bulletin of the Korean Chemical Society
• /
• 제17권9호
• /
• pp.794-798
• /
• 1996

Solid solutions of the nonstoichiometric Dy1-xSrxCoO3-y system with the compositions of x=0.00, 0.25, 0.50, 0.75, and 1.00 have been synthesized by the solid state reaction at 1000 ℃ under atmospheric air pressure. The crystallographic structures of the solid solutions are analyzed by the powder X-ray diffraction patterns at room temperature. The analyses assign the compositions of x=0.00 and 0.25 to the orthorhombic system with space group of Pbnm/D2h16, the compositions of x=0.50 and 0.75 to the tetragonal system like a typical SrCoO2.86, and the composition of x=l.00 or SrCoO2.50 to the brownmillerite type system with space group of I**a. The reduced lattice volumes increase with x value due to the larger radius of Sr2+ ion than that of Dy3+ ion. The mole ratio of Co4+ ion to total Co ion with mixed valence state between Co3+ and Co4+ ions at B sites or τ value has been determined by an iodometric titration. All the samples except for the DyCoO3 compound show the mixed valnce state and thus the composition of x=0.50 has the maximum τ value in the system. The oxygen vacancies increasing with x value are randomly distributed over the crystal lattice except for the composition of x=l.00 which have the ordering of the oxygen vacancies. The nonstoichiometric chemical formulas of the Dy1-xSrxCo3+1-τCo4+τO3-(x-τ)/2 system are formulated from the x, τ, and y values. The electrical conductivity in the temperature range of 100 to 900 K increases with τ value linearly because of positive holes of the Co4+ ions in π* band as a conducting carrier. The activation energy of the x=0.50 as Ea=0.17 eV is minimum among other compouds. Broad and high order transition due to the overlap between σ* and π* bands broadened by the thermal activation is observed near 1000 K and shows a low temperature-semiconducting behavior. Magnetic properties following the Currie-Weiss law show the low to high spin transition in the cobaltate perovskite. Especially, the composition of x=0.75 presents weak ferromagnetic behavior due to the Co3+-O2--Co4+ indirect superexchange interaction.

• The Journal of Advanced Prosthodontics
• /
• 제9권5호
• /
• pp.394-401
• /
• 2017

PURPOSE. The purpose of this study was to compare the optical properties of pre-colored dental monolithic zirconia ceramics of various thicknesses sintered in a microwave and those in a conventional furnace. MATERIALS AND METHODS. A2-shade of pre-colored monolithic zirconia ceramic specimens ($22.0mm{\times}22.0mm$) in 3 thickness groups of 0.5, 1.0, and 1.5 mm were divided into 2 subgroups according to the sintering methods (n=9): microwave and conventional sintering. A spectrophotometer was used to obtain CIELab color coordinates, and translucency parameters and CIEDE2000 color differences (${\Delta}E_{00}$) were measured. The relative amount of monoclinic phase ($X_m$) was estimated with x-ray diffraction. The surface topography was analyzed by atomic force microscope and scanning electron microscope. Statistical analyses were conducted with two-way ANOVA (${\alpha}=.05$). RESULTS. There were small interaction effects on CIE $L^*$, $a^*$, and TP between sintering method and thickness (P<.001): $L^*$ (partial eta squared ${{\eta}_p}^2=0.115$), $a^*$ (${{\eta}_p}^2=0.136$), and TP (${{\eta}_p}^2=0.206$), although higher $b^*$ values were noted for microwave sintering regardless of thickness. Color differences between two sintering methods ranged from 0.52 to 0.96 ${\Delta}E_{00}$ units. The $X_m$ values ranged from 7.03% to 9.89% for conventional sintering, and from 7.31% to 9.17% for microwave sintering. The microwave-sintered specimen demonstrated a smoother surface and a more uniform grain structure compared to the conventionally-sintered specimen. CONCLUSION. With reduced processing time, microwave-sintered pre-colored dental monolithic zirconia ceramics can exhibit similar color perception and translucency to those by conventional sintering.

• 한국자기학회지
• /
• 제9권1호
• /
• pp.7-16
• /
• 1999

본 연구에서는 화학량론적 YIG(yttrium iron garnet : Y3Fe5O12)를 중심으로 하여 조성에 따른 비화학량론적인 YIG(Y3-xFe5+xO12)를 고상반응법으로 제작하고 5.11GHz(G-band)와 23.39 GHz(K-band)의 마이크로파 영역에서 강자성 공명 현상을 이용하여 자기적 특성을 조사하였다. 측정된 분광학적 분리상수 g는 2.02~2.35이다. 포화자화와 유효자화의 값은 x=-0.05의 조성비를 중심으로 이트륨(Y3+)초과와 철(Fe3+)이 초과함에 따라 감소하는 경향을 보였으며, 이와 반대로 선폭( p-p)은 급격히 증가하였다. 자기적 특성의 온도 의존성을 조사하기 위해 K-band에서 80K에서 상온까지 공명흡수선을 측정하여 조성에 따른 M(0), Bloch 상수 B, C 및 스핀파 경도상수 D(약 162~206eV$\AA$2)와 교환상호작용의 평균자승 영역(약 5.84~12.13$\AA$2)의 변화를 조사하였다.

• 한국보건간호학회지
• /
• 제1권1호
• /
• pp.32-44
• /
• 1987

The purpose of this survey was to find out the knowledge and the disease management of the Tuberculosis patients by themselves among the first grade middle and high school students in Seoul city during the period of June 15-July 19, 1986. Questionaires were used to collect the data and were analysed from answers of 188 students at the 113 schools. The results were as follows: 1. The ages of the students were distributed as follows: in middle school, 13 years old was $70.0\%$. 14 years old, $20.0\%$, and 15 years old, $6.7\%$. In high school, 16 years old was $66.5\%$, 17 years old, $18.4\%$, and 15 years old, $10.1\%$. 2. In X-ray mass examination by school, the rate of execution was $50.4\%$ in middle school and $96.7\%$ in high school, and in X-ray mass examination by student, it was $50.1\%$ in middle school and $97.3\%$ in high school. 3. The prevalence of Tuberculosis among the middle school students was $00.3\%$and high school students, $0.15\%$. 4. Of the total, $77.1\%$ of the respondents did not realized Tuberculosis bdore X-ray mass examination 5. The perfect cure rate of the respondents was $52.7\%$. 6. General characteristics of the respondents: a. The educational background was varied as follows: of the total $47.9\%$ of the fathers had the level of high school education and $37.2\%$ of the mothers had the level of middle school education. The educational background of the parents had no statistical significant to the medical cure rate of Tuberculosis. (P>0.05). b. The average monthly income of the family was as follows : above five hundred thousand won was $21.8\%$, three or four hundred thousand won was $22.9\%$, and below two hundred thousand won was $10.6\%$. The most frequent family size was 5-6 persons. $(59.6)\%$. 7. The actual situation of Tuberculosis control and the variables related to the treatment: a. $69.1\%$ of the respondents wanted mental support from their surroundings. $48.7\%$ of the respondents answered that their parents or the other family helped treatment as mental supporter, b. As a medical service, $53.2\%$ of the respondents were treated at Health Center, $38.8\%$ were treated at a hospital. A medical service was statistically significant to the medical cure (P<0.01). c. Family members of $61.7\%$ of the respondents had checked chest X-ray. A X-ray examination of family was statistically significant to the medical cure (P<0.005). d. $73.9\%$ of the respondents had taken the Anti-Tuberculosis-drugs regularly. Regular taking of Anti-Tuberculosis drugs was statistically significant to the medical cure (P<0.005). e. $89.4\%$ of the respondents had received a regular examination during the treatment. A regular examination was statistically significant to the medical cure (P<0.05). f. The period of perfect cure was that $50.0\%$ of the respondents took from half a year to one year, $25.2\%$ took below half a year and $16.2\%$ took from one year to one year and a half. g. The rate of the respondents who abhored to let anyone know their disease was $93.1\%$. 8. Knowledge related with Tuberculosis: a .$63.3\%$ of the respondents answered that Tuberculosis is a communiable disease. b. $89.9\%$ of the respondents answered that there is a preventive method of Tuberculosis. Among them, $28.4\%$ answered that it is B.C.G. vacination. c. $96.8\%$ of the respondents belived they can be cured perfectly. d. $42.4\%$ of the perfect curer answered that they had have permanent immunity of Tuberculosis. According to the results of above study, it is desired to be practiced X-ray mass examination to the total middle school students. Nurse teachers and the responsible persons who participated to the helping of disease management to the Tuberculosis patients must make an offer knowledge of Tuberculosis to the Tuberculosis patients. And also, it will be very helpful to the cure of Tuberculosis patients if they do their best and to have a mental supporter.

• Journal of Microbiology
• /
• 제40권2호
• /
• pp.129-133
• /
• 2002

The fungus, Emericellopsis minima W2, capable of degrading poly(3-hydroxybutyrate) (PHB) was isolated from a waste water sample. Production of the PHB depolymerase from E. minima W2 (PhaZ/ sub Emi/) was significantly repressed in the presence of glucose. PhaZ/ sub Emi/ was purified by column chromatography on Octyl-Sepharose CL-4B and Sephadex G-100. The molecular mass of the PhaZ/ sub Emi/), which consisted of a single polypeptide chain, was estimated to be 48.0 kDa by SDS-PAGE and its pI vague was 4.4. The maximum activity of the PhaZ/ sub Emi/ was observed at pH 9.0 and 55$\^{C}$. It was significantly inactivated by 1mM dithiothreitol, 2mM diisopropyl fluorphosphate, 0.1mM Tween 80, and 0.1 mM Triton X-l00, but insensitive to phenylmethylsulfonyl fluoride and N-ethylmaleimide. The PhaZ/ sub Emi/ efficiently hydrolyzed PHB and its copolyester with 30 mol% 3-hydroxyvalerate, but did not act on poly(3-hydroxyoctanoate). It also hydrolyzed p-nitrophenylacetate and p-nitrophenylbutyrate but hardly affected the longer-chain forms. The main hydrolysis product of PHB was identified as a dimer of 3-hydroxybutyrate.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권3호
• /
• pp.335-340
• /
• 2012

The data used came from two trials undertaken under the same climatic conditions (spring-summer). In both trials pluriparious buffaloes were utilized similar in weight, body condition score, and milk production from the previous year. From the first trial the data used was from the sub-period 23-88 DIM provided by seven animals fed ad libitum with diet A (6.69 MJ/kg DM; 158.30 g/kg of crude protein) with a forage/concentrate ratio of 48/52. From the second trial the data used was from the sub-period 33-90 DIM provided by seven animals fed ad libitum with diet B (6.63 MJ/kg DM; 179.50 g/kg of crude protein) and by seven animals fed ad libitum with diet C (5.99 MJ/kg DM; 155.40 g/kg of crude protein), each of the diets had the same forage/concentrate ratio (53/47). A significant difference was found in milk production between group B and C (13.08 vs. 11.56 kg/d, p<0.05), an intermediate production (12.10 kg/d) was noted in group A. A significant difference was found between fat (76.58 vs. 69.24 g/kg, p<0.05), protein (46.14 vs. 43.16 g/kg, p<0.05) and casein (39.94 vs. 34.98 g/kg, p<0.05) of the milk of group B with respect to group A. The milk of group C gave fat values (71.80 g/kg), protein (45.52 g/kg) and casein (39.06 g/kg) statistically equal to those of group B. The milk of groups B and C, in respect to the milk of group A, gave values of $K_{20}$ (1.77, 1.82 vs. 3.68 min, p<0.05), statistically lower and values of $A_{30}$ (48.28, 47.27 vs. 40.64 mm, p<0.05) statistically higher. Two simple linear regressions were calculated where the independent variable (x) was the daily standardized milk production, the dependent variable (y) or the daily intake of net energy or crude protein. Equation 1) NE (MJ/d) = 74.4049+2.8308${\times}$kg of normalized milk; equation 2) CP (kg/d) = 1.4507+0.1085${\times}$kg of normalized milk, both the equations were significant (p<0.05) with determination coefficients of 0.58 and 0.50 respectively. For a production of normalized milk that varies from 9 to 13 kg, the respective energy-protein concentrations fluctuate from 6.09 to 6.78 MJ/kg DM and from 148.00 to 174.46 g/kg DM.

• 한국자기학회지
• /
• 제14권1호
• /
• pp.38-44
• /
• 2004

초거대 자기저항 물질인 페롭스카이트 구조의 망간 산화물 L $a_{0.67}$B $a_{0.33}$M $n_{1-x}$ F $e_{x}$ $O_3$(이하 LBMFO)에 대하여 에탄올을 용매로 한 졸겔법을 이용하여 미량의 철을 치환한 단일상의 LBMFO산화물 분말을 제조하였다. 결정학적 및 자기적 성질을 x선 회절법, 시료진동형 자화율 측정기(VSM), 중성자 회절 실험, 러더포드 후방 산란법, Mossbauer 분광법 및 자기저항 측정을 통하여 연구하였다. X-선 및 중성자 회절실험 분석 결과 결정학적 구조는 Pnma의 공간구조를 갖는 orthorhombic구조로 분석되었다. 미량의 철이 치환됨에 따라 격자상수 $a_{0}$ , $c_{0}$ 는 증가하며, $b_{0}$ 는 감소하는 경향을 보였다. VSM측정결과 포화 자화값과 보자력은 철의 치환량이 증가함에 따라서 각각 감소하는 경향을 보였다. 큐리(Curie)온도는 철의 치환량이 증가함에 따라서 360 K에서 점차 감소하는 경향성을 나타내었다. 철을 1 % 치환한 경우 1T 인가자장 하에 최대자기저항변화의 비($\Delta$$\rho$/$\rho$$_{H}$)는 281 K에서 9.5%였으며, 금속-반도체 전이 온도는 253 K로 관측되었다. Mossbauer 스펙트럼 분석결과 15 K에서 날카로운 Lorentzian 12 line(2 set)의 공명 흡수선으로 측정되었다. 이성질체 이동 값으로부터 미량 치환된 $^{57}$ Fe이온의 전자 상태는 +3가 임을 알 수 있었다.는 +3가 임을 알 수 있었다.

• 한국농공학회지
• /
• 제16권1호
• /
• pp.3225-3262
• /
• 1974

The purposes of this thesis are to clarify experimentally the variation of ground water temperature in tube wells during the irrigation period of paddy rice, and the effect of ground water irrigation on the growth, grain yield and yield components of the rice plant, and, furthermore, when and why the plant is most liable to be damaged by ground water, and also to find out the effective ground water irrigation methods. The results obtained in this experiment are as follows; 1. The temperature of ground water in tube wells varies according to the location, year, and the depth of the well. The average temperatures of ground water in a tubewells, 6.3m, 8.0m deep are $14.5^{\circ}C$ and $13.1^{\circ}C$, respercively, during the irrigation period of paddy rice (From the middle of June to the end of September). In the former the temperature rises continuously from $12.3^{\circ}C$ to 16.4$^{\circ}C$ and in the latter from $12.4^{\circ}C$ to $13.8^{\circ}C$ during the same period. These temperatures are approximately the same value as the estimated temperatures. The temperature difference between the ground water and the surface water is approximately $11^{\circ}C$. 2. The results obtained from the analysis of the water quality of the "Seoho" reservoir and that of water from the tube well show that the pH values of the ground water and the surface water are 6.35 and 6.00, respectively, and inorganic components such as N, PO4, Na, Cl, SiO2 and Ca are contained more in the ground water than in the surface water while K, SO4, Fe and Mg are contained less in the ground water. 3. The response of growth, yield and yield components of paddy rice to ground water irrigation are as follows; (l) Using ground water irrigation during the watered rice nursery period(seeding date: 30 April, 1970), the chracteristics of a young rice plant, such as plant height, number of leaves, and number of tillers are inferior to those of young rice plants irrigated with surface water during the same period. (2) In cases where ground water and surface water are supplied separately by the gravity flow method, it is found that ground water irrigation to the rice plant delays the stage at which there is a maximum increase in the number of tillers by 6 days. (3) At the tillering stage of rice plant just after transplanting, the effect of ground water irrigation on the increase in the number of tillers is better, compared with the method of supplying surface water throughout the whole irrigation period. Conversely, the number of tillers is decreased by ground water irrigation at the reproductive stage. Plant height is extremely restrained by ground water irrigation. (4) Heading date is clearly delayed by the ground water irrigation when it is practised during the growth stages or at the reproductive stage only. (5) The heading date of rice plants is slightly delayed by irrigation with the gravity flow method as compared with the standing water method. (6) The response of yield and of yield components of rice to ground water irrigation are as follows: \circled1 When ground water irrigation is practised during the growth stages and the reproductive stage, the culm length of the rice plant is reduced by 11 percent and 8 percent, respectively, when compared with the surface water irrigation used throughout all the growth stages. \circled2 Panicle length is found to be the longest on the test plot in which ground water irrigation is practised at the tillering stage. A similar tendency as that seen in the culm length is observed on other test plots. \circled3 The number of panicles is found to be the least on the plot in which ground water irrigation is practised by the gravity flow method throughout all the growth stages of the rice plant. No significant difference is found between the other plots. \circled4 The number of spikelets per panicle at the various stages of rice growth at which_ surface or ground water is supplied by gravity flow method are as follows; surface water at all growth stages‥‥‥‥‥ 98.5. Ground water at all growth stages‥‥‥‥‥‥62.2 Ground water at the tillering stage‥‥‥‥‥ 82.6. Ground water at the reproductive stage ‥‥‥‥‥ 74.1. \circled5 Ripening percentage is about 70 percent on the test plot in which ground water irrigation is practised during all the growth stages and at the tillering stage only. However, when ground water irrigation is practised, at the reproductive stage, the ripening percentage is reduced to 50 percent. This means that 20 percent reduction in the ripening percentage by using ground water irrigation at the reproductive stage. \circled6 The weight of 1,000 kernels is found to show a similar tendency as in the case of ripening percentage i. e. the ground water irrigation during all the growth stages and at the reproductive stage results in a decreased weight of the 1,000 kernels. \circled7 The yield of brown rice from the various treatments are as follows; Gravity flow; Surface water at all growth stages‥‥‥‥‥‥514kg/10a. Ground water at all growth stages‥‥‥‥‥‥428kg/10a. Ground water at the reproductive stage‥‥‥‥‥‥430kg/10a. Standing water; Surface water at all growh stages‥‥‥‥‥‥556kg/10a. Ground water at all growth stages‥‥‥‥‥‥441kg/10a. Ground water at the reproductive stage‥‥‥‥‥‥450kg/10a. The above figures show that ground water irrigation by the gravity flow and by the standing water method during all the growth stages resulted in an 18 percent and a 21 percent decrease in the yield of brown rice, respectively, when compared with surface water irrigation. Also ground water irrigation by gravity flow and by standing water resulted in respective decreases in yield of 16 percent and 19 percent, compared with the surface irrigation method. 4. Results obtained from the experiments on the improvement of ground water irrigation efficiency to paddy rice are as follows; (1) When the standing water irrigation with surface water is practised, the daily average water temperature in a paddy field is 25.2$^{\circ}C$, but, when the gravity flow method is practised with the same irrigation water, the daily average water temperature is 24.5$^{\circ}C$. This means that the former is 0.7$^{\circ}C$ higher than the latter. On the other hand, when ground water is used, the daily water temperatures in a paddy field are respectively 21.$0^{\circ}C$ and 19.3$^{\circ}C$ by practising standing water and the gravity flow method. It can be seen that the former is approximately 1.$0^{\circ}C$ higher than the latter. (2) When the non-water-logged cultivation is practised, the yield of brown rice is 516.3kg/10a, while the yield of brown rice from ground water irrigation plot throughout the whole irrigation period and surface water irrigation plot are 446.3kg/10a and 556.4kg/10a, respectivelely. This means that there is no significant difference in yields between surface water irrigation practice and non-water-logged cultivation, and also means that non-water-logged cultivation results in a 12.6 percent increase in yield compared with the yield from the ground water irrigation plot. (3) The black and white coloring on the inside surface of the water warming ponds has no substantial effect on the temperature of the water. The average daily water temperatures of the various water warming ponds, having different depths, are expressed as Y=aX+b, while the daily average water temperatures at various depths in a water warming pond are expressed as Y=a(b)x (where Y: the daily average water temperature, a,b: constants depending on the type of water warming pond, X; water depth). As the depth of water warning pond is increased, the diurnal difference of the highest and the lowest water temperature is decreased, and also, the time at which the highest water temperature occurs, is delayed. (4) The degree of warming by using a polyethylene tube, 100m in length and 10cm in diameter, is 4~9$^{\circ}C$. Heat exchange rate of a polyethylene tube is 1.5 times higher than that or a water warming channel. The following equation expresses the water warming mechanism of a polyethylene tube where distance from the tube inlet, time in day and several climatic factors are given: {{{{ theta omega (dwt)= { a}_{0 } (1-e- { x} over { PHI v })+ { 2} atop { SUM from { { n}=1} { { a}_{n } } over { SQRT { 1+ {( n omega PHI) }^{2 } } } } LEFT { sin(n omega t+ { b}_{n }+ { tan}^{-1 }n omega PHI )-e- { x} over { PHI v }sin(n omega LEFT ( t- { x} over {v } RIGHT ) + { b}_{n }+ { tan}^{-1 }n omega PHI ) RIGHT } +e- { x} over { PHI v } theta i}}}}{{{{ { theta }_{$\infty$ }(t)= { { alpha theta }_{a }+ { theta }_{ w'} +(S- { B}_{s } ) { U}_{w } } over { beta } , PHI = { { cpDU}_{ omega } } over {4 beta } }}}} where $\theta$$\omega$; discharged water temperature($^{\circ}C$) $\theta$a; air temperature ($^{\circ}C$) $\theta$$\omega$';ponded water temperature($^{\circ}C$) s ; net solar radiation(ly/min) t ; time(tadian) x; tube length(cm) D; diameter(cm) ao,an,bn;constants determined from $\theta$$\omega$(t) varitation. cp; heat capacity of water(cal/$^{\circ}C$ ㎥) U,Ua; overall heat transfer coefficient(cal/$^{\circ}C$ $\textrm{cm}^2$ min-1) $\omega$;1 velocity of water in a polyethylene tube(cm/min) Bs ; heat exchange rate between water and soil(ly/min)

• 한국산림과학회지
• /
• 제66권1호
• /
• pp.16-36
• /
• 1984

화강암질풍화토(花崗岩質風化土)의 미교란(未攪亂) 시료(試料)를 사용하여 일면(一面) 직접(直接) 전단시험(剪斷試驗)으로 측정(測定)한 전단강도(剪斷强度)와 함수비(含水比), 간극비(間隙比), 건조밀도(乾燥密度), 비중(比重)과의 관계(關係)를 통계(統計) 분석(分析)하였고, 화강암질풍화토(花崗岩質風化土)의 사방시공지(砂防施工地)에 식재(植栽)된 리기다소나무림(林)과 리기테-다소나무림(林)에서 토양단면(土壤斷面)을 만들어 산중식토양경도계(山中式土壤硬度計)로 토양(土壤)의 견밀도(堅密度)를 측정(測定)하고 수근분포(樹根分布)를 조사(調査)하여 통계(統計) 분석(分析)한 결과(結果) 다음과 같다. 1) 함수비(含水比), 간극비(間隙比)와 전단강도(剪斷强度) 간(間)에는 유의적(有意的)인 부(負)의 상관(相關)이며 직접적(直接的)인 관계(關係)에 있었다. 2) 건조밀도(乾燥密度)와 전단강도(剪斷强度) 사이에는 정(正)의 상관(相關)이며 직접적(直接的)인 관계(關係)에 있었다. 3) 비중(比重)과 전단강도(剪斷强度) 간(間)에는 유의적(有意的)인 상관관계(相關關係)를 인정(認定)할 수 없었다. 4) 전단강도(剪斷强度)에 영향(影響)을 미치는 영향요소(影響要素)의 직접효과(直接效果)의 크기는 함수비(含水比)>간극비(間隙比)>건조밀도(乾燥密度)의 순위(順位)이다. 5) 다중선형(多重線型) 회귀방정식(回歸方程式)의 분산분석결과(分散分析結果) 함수비(含水比)만이 회귀성(回歸性)이 인정(認定)되므로 함수비(含水比)를 독립변수(獨立變數)로 하여 전단강도(剪斷强度)를 추정(推定)하기 위한 회귀방정식(回歸方程式)은 제한(制限)된 건조밀도(乾燥密度)의 범위내(範圍內)에서 적합도(適合度)가 매우 높게 평가(評價)되었다. 6) 토양(土壤)의 견밀도(堅密度)는 토심(土深)이 깊어짐에 따라 높아진다. 7) 토양(土壤)의 지표경도(指標硬度)와 수근수(樹根數) 간(間)에는 유의적(有意的)인 부(負)의 상관(相關)이며 직접적(直接的)인 관계(關係)에 있었다. 8) 리기다소나무와 리기테-다소나무의 수근(樹根)은 토심(土深) 20cm까지에 대부분 분포(分布)하고 있었다. 9) 리기다소나무림(林)과 리기테-다소나무림(林)에서 측정(測定)한 토양(土壤)의 지표경도(指標硬度)를 독립변수(獨立變數)로한 회귀방정식(回歸方程式)으로 수근수(樹根數)를 추정(推定)할 수 있었으나 낮은 적합도(適合度)를 나타내었다.