• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.7
• /
• pp.528-533
• /
• 2013

We focused on the development of red azo colorants with high thermal stability and good solubility for LCD color filter in this research. For the synthesis of hybrid azo colorants, we used the couplers of aniline, naphthol and benzoimidazol functional group. The synthesized hybrid azo colorants were charaterized by using NMR, UV/visible spectroscopy, FT-IR, EA and TGA. They represented the maximum absorption wavelengths which are longer than 500 nm in UV/visible spectrum. So they were confirmed to be suitable for red colorants of LCD color filter. Azo compound (1a, 1b) with aniline functional group had good solubility in organic solvents such as acetone, methanol, chloroform and PGMEA. Moreover azo compounds (1c, 1d and 1e) with naphthol and benzoimidazolone functional group gave excellent thermal stability higher than $250^{\circ}C$ in TGA thermograms.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.610-616
• /
• 2014

The influence of solvent polarity on the absorption spectra of some synthesized azo dye with heterocyclic moieties and ${\beta}$-naphthol (1-3) have been investigated using a UV-Visible spectrophotometer. The spectral characteristics of the azo dyes (1-3) in different solvents at room temperature were analyzed. The solvatochromic empirical variables like ${\pi}^*$, ${\alpha}$, and ${\beta}$ have been used to discuss the solvatochromic behaviour of the dyes and to evaluate their contributions to the solute-solvent interactions. A multi-parameter regression model for quantitative assessment of the solute/solvent interaction and the absorption has been used to explain the solvent effect on azo dyes (1-3).

• Journal of Surface Science and Engineering
• /
• v.42 no.6
• /
• pp.267-271
• /
• 2009

Multicomponent transparent conducting oxide films were deposited on glass substrates at 150 by dual magnetron sputtering of AZO and ITO targets. In the case of mixing a limited amount of ITO (10W), resistivity of TCO films was significantly increased compared to the AZO film; from $3.5{\times}10^{-3}$ to $9.7{\times}10^{-3}{\Omega}{\cdot}cm$. Deterioration of the electrical conductivity is attributed to the decreases in carrier concentration and Hall mobility. Improvement of the conductivity could be obtained for the films prepared with ITO powers larger than 40 W. The lowest resistivity ($\rho$) of $7.3{\times}10^{-4}{\Omega}{\cdot}cm$ was achieved when ITO power was 100 W. Effects of $H_2$ incorporation on the electrical and optical properties of AZO-ITO films were investigated in this work. Addition of small amount of hydrogen resulted in the increase of carrier concentration and the improvement of electrical conductivity. It is apparent that the roughness of AZO-ITO films decreases dramatically after the transition of microstructure from polycrystalline to amorphous phase, which gives practical advantages such as an excellent uniformity of surface and a high etching rate. AZO-ITO films grown at sputtering ambient with hydrogen gas are expected to be applicable to optoelectronic devices such as organic light emitting diodes and flexible displays due to their sufficient electrical and structural properties.

• Textile Coloration and Finishing
• /
• v.21 no.6
• /
• pp.46-55
• /
• 2009

Some phthalimidyl azo dyes containing N,N-diethyl or N,N-di($\beta$-methoxycarbonylethyl) group have been attempted to apply onto two kinds of polyurethane based materials and rationalize their dyeability and fastness comparing with those of some commercial disperse dyes. Phthalimidyl azo dye showed 66~98% of exhaustion yield at $120^{\circ}C$ by a conventional exhaust dyeing method. The dyeings were found to have a higher wash fastness with both fabrics in comparison with those of commercial dyes which indicates lower thermomigration and efficient alkali clearable properties of phthalimidyl ring and/or diester group during post-dyeing process.

• Journal of Surface Science and Engineering
• /
• v.42 no.3
• /
• pp.128-132
• /
• 2009

Transparent conducting thin films of indium tin oxide(ITO) co-sputtered with aluminum-doped zinc oxide(AZO) were deposited on glass substrate by dual magnetron sputtering. It was found that the electrical properties and structural characteristics of the films are significantly changed according to the sputtering power of the AZO target. The IAZTO film prepared with D.C power of ITO at 100 W and R.F power of AZO at 50 W shows an electrical resistivity of $4.6{\times}10^{-4}{\Omega}{\cdot}cm$ and a sheet resistance of $30{\Omega}/{\square}$ (for 150 nm thick). Besides of the improvement of the electrical properties, compared to the ITO films deposited at the same process conditions, the IAZTO films have very smooth surface, which is due to the amorphous nature of the films. However, the electrical conductivity of the IAZTO films was found to be deteriorated along with the crystallization in case of the high temperature deposition (above $310^{\circ}C$). In this work, high quality amorphous transparent conductive oxide layers could be obtained by mixing AZO with ITO, indicating possible use of IAZTO films as the transparent electrodes in OLED and flexible display devices.

• Journal of the Korean Society for Heat Treatment
• /
• v.30 no.1
• /
• pp.13-16
• /
• 2017

$SnO_2$ single layer films and 2 nm thick Ni thin film intermediated $AZO/Ni/SnO_2$ trilayer films were deposited on glass substrate at room temperatures by RF and DC magnetron sputtering and then the optical and electrical properties of the films were investigated to enhance opto-electrical performance of $SnO_2$ single layer films. As deposited $SnO_2$ films show the optical transmittance of 81.8% in the visible wavelength region and a resistivity of $1.2{\times}10^{-2}{\Omega}cm$, while $AZO/Ni/SnO_2$ films show a lower resistivity of $5.8{\times}10^{-3}{\Omega}cm$ and an optical transmittance of 77.1% in this study. Since $AZO/Ni/SnO_2$ films show the higher figure of merit than that of the $SnO_2$ single layer films, it is supposed that the $AZO/Ni/SnO_2$ films can assure high opto-electrical performance for use as a transparent conducting oxide in various display applications.

• Textile Coloration and Finishing
• /
• v.23 no.3
• /
• pp.163-168
• /
• 2011

In this article, we synthesized an azo dye rotaxane containing bis(8-hydroxyquinoline) group and its polymeric metal complex with zinc. The azo dye rotaxane exhibits high pH sensitivity, solvatochromism and zinc (II) ion sensings in aqueous solution. These behaviors came from the tautomeric equilibrium between azo-hydrazone tautomers and the formation of extended conjugation. The structure of polymeric zinc complexed dye rotaxane was confirmed with NMR and FT-IR measurements. The existence of CD rings, provided by dye rotaxane formation, was found to be very beneficial in improving aqueous solubility of polymeric metal complex.

• Textile Coloration and Finishing
• /
• v.18 no.5 s.90
• /
• pp.15-21
• /
• 2006

Temporarily solubilized azo disperse dyes containing ${\beta}$-sulfatoethylsufonyl group were applied to acetate fabric and the feasibility of dispersant-free dyeing was investigated. The color yields of the dyes on acetate fabric were found to be dependent on dye bath pH as well as dyeing temperature. The optimum results were obtained at pH 6 and $80^{\circ}C$. The dyes showed good exhaustion and levelling properties. Vinylsulfone derivatives of the dyes were prepared and applied to acetate with dispersant. Dyeing properties of the temporarily solubilized disperse dyes were similar to or better than those of the vinylsulfone dyes. The dyes showed moderate to good fastness properties on acetate.

• Molecular & Cellular Toxicology
• /
• v.3 no.2
• /
• pp.145-149
• /
• 2007

Studies of relationship between structure and toxicity of azo dyes have been performed with comparative molecular field analysis (CoMFA) techniques. 3D QSTR analyses indicate that the steric and electrostatic interactions are important. The steric field based model gives strong correlation ($q^2$=0.57, $r^2$= 0.92). The steric field in conjunction with electrostatic field give more strong correlation ($q^2$=0.57, $r^2$=0.95). All study indicates that a bulky and electronegative group at benzene ring and a small group at position 3 of aniline ring might be significant to reduce the mutagenicity.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.493-498
• /
• 1995

PAZO-6 is a new combined type liquid crystalline polymers (LCP) which has two types of mesogens combined non linearly. Ordering of branch mesogen azo group, in PAZO-6 is an important parameter to observe as well as the substitution effect on the backbone. The related small molecules sllch as monomers as well as the polymer itself are studied by solid state NMR techniques. Preliminary $^{13}C$ CP/MAS (cross polarization/ magic angle spinning) spectral results suggest that the azo groups in the monomers are not aligned with themselves. Azo groups in the monomers seem to be poorly ordered between well ordered p-phenylene terephthalate moeities. Similar disordering tendency of the azo group in PAZO-6 is deduced from the overall aromatic carbon peak positions which are not much different from those of the monomer.