• 한국추진공학회지
• /
• 제16권1호
• /
• pp.79-85
• /
• 2012

본 조사에서는 주로 비 축대칭 스피닝, 열처리와 스피닝, 그리고 자유 맨드릴 스피닝 등에 대한 신기술을 동향을 문헌을 통하여 조사하였다. 기존의 재래식, 전단, 튜브 스피닝은 모두 축대칭 맨드릴(제품의 최종 제품의 내경과 같은)을 사용하여 가공하여 왔으나, 신 기법에서는 비 축대칭 맨드릴이나, 맨드릴이 없이, 또 열처리를 동반한 스피닝 공법이 시도되고 있다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.241-244
• /
• 2010

기존의 재래식, 전단, 튜브 스피닝이 모두 축대칭 제품의 형상화된 맨드릴을 사용하여 가공하여 왔다. 이러한 고전적 기법에서 한걸음 더 나아가 비축대칭, 열처리를 동반한 스피닝, 맨드릴이 자유로운 새로운 공법이 시도되고 있다. 본 조사에서는 주로 자유 맨드릴 공법에 대하여 동향을 조사하였다.

• 소성∙가공
• /
• 제14권9호통권81호
• /
• pp.764-771
• /
• 2005

This study is related with the development of CNC spinning machine and the axisymmetric conventional spinning such as drum type and conical type steel shells. The CNC spinning machine is constructed with heavy duty frame and the hydraulic servo system is applied in order to give the exactness of motion control. The experiment has been carried out considering feeding velocity, mandrel shape, and the corner radius of mandrel and forming rollers. As a result of experiment, the limiting spinning ratio and thickness strain distribution are obtained and it can be seen that the spinnability is dominant to the feeding velocity and corner radius of forming roller. This research can contribute to the development of axisymmetric mechanical part which is applicable to automotive and aerospace industry.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.79-81
• /
• 2000

Outdoor insulation of overhead distribution lines with wood, concrete and steel pole has been safety under various environmental conditions including contamination, moisture condensation, rain and lightning overvoltages. In this paper introduce to FRP technology of the power distribution single pole. FRP pole has been used very much as high strength material for insulators because of its high strength and good insulation properties. In addition, FRP pole was made by filament winding method. In a filament winding process, a band of continuous resin-impregnated rovings or monofilaments is wrapped around a rotating mandrel and cured to produce axisymmetric hollow parts.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.265-271
• /
• 2011

기존의 재래식, 전단, 튜브 스피닝은 모두 축대칭 제품의 형상화된 맨드릴을 사용하여 가공하여 왔다. 이러한 고전적 기법에서 한걸음 더 나아가 비축대칭, 열처리를 동반한 스피닝, 자유 맨드릴 공법이 시도되고 있다. 본 조사에서는 비대칭 스피닝과 열처리 스피닝에 등에 대한 신기술 동향과 자유 맨드릴을 사용하는 스피닝 기술 동향을 조사하였다.

• 소성∙가공
• /
• 제7권1호
• /
• pp.72-80
• /
• 1998

This study is concerned with the thermo-biscoplastic finite element analysis of hot tube extrusion through square dies with a mandrel. The problem is treated as a non-steady state and the ALE description is used due to abruptly turning flow at the die aperture. Since the contact heat transfer coefficient and the friction factor are required in the analysis experiments are also carried out to determine the values, In order to apply ceramics to an extrusion die the study is focussed on under-standing the characteristics of the process. The simulated results provide the useful informations such as metal flow temperature distribution stress state etc. The elastic analysis of the dies is carried out to obtain the stress state of the ceramic dies.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.470-474
• /
• 2000

Cold expansion of fastener holes is a mechanical process widely used in the aerospace industry. This treatment leads to an improvement of fatigue behavior due to the developed compressive residual stresses on the hole surface. The residual stress profile depends on the parameters of cold expansion, which are, expanding rate, inserting direction of mandrel, material properties etc. and the method to confirm this profile is only measurement by X-ray diffractometer. Despite its importance to aerospace industries, little attention has been devoted to the accurate modelling of the process. In this paper, Two-dimensional axisymmetric finite element simulations have been conducted for the cold expansion in an aluminium plate in order to predict the magnitude and distribution of the residual stress and plastic deformation. Maximum compressive residual stress could be increase about 7 percent using the 2-step cold expansion method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.882-886
• /
• 1996

The use of ceramics for extrusion dies is limited since the modification of die design is difficult. In order to successfully apply the ceramic dies to extrusion dies, a better understanding of the process should be preceded. This study focuses on understanding the characteristics of the process. In the present study, a hot extrusion of tube with a mandrel is analyzed by ALE finite element method. In order to obtain the stress state of ceraminc dies, the elastic analysis of dies is also carried out.