• Tribology and Lubricants
• /
• 제14권4호
• /
• pp.51-57
• /
• 1998

Recently, bent-axis-type axial piston pumps driven by rods being in extensively used in the world, because of simple design, lightweight, effective cost. So, to guarantee the quality of bent-axis-type axial piston pumps driven by rods, it is necessary to know characteristics of the driving mechanism of rods. But, as they perform both reciprocating and spinning motions, it is difficult to understand driving mechanism. In this paper, I studied the theoretical driving mechanisms of cylinder block driven by rods through geometric method. I found that the cylinder block was driven by one rod in limited area and the driving area was changed by rod's tilting angle and cylinder block's swivel angle.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.408-413
• /
• 2003

Naphthalene sublimation technique is used to investigate the average and local heat transfer from the circular rod, and to determine the average and local heat transfer from the circular rod with and without square wing type mixing vane in axial flow. The experiments are performed for a circular rod and flat plate with and without mixing vane in wind tunnel. In comparison with flat plate and circular rod in axial flow, averaged Nusselts number is increased 2 times as the increase of Reynolds number with mixing vane. Longitudinal vortex induced by square wing type has the stronger vortex strength, so square wing type vortex generator shows an effect further in downstream.

• 한국전산구조공학회논문집
• /
• 제18권4호통권70호
• /
• pp.347-360
• /
• 2005

경수로 원자로 하부구조물에서 발생되는 유포의 불균일성에 기인하는 교차류와 핵연료집합체의 수력저항의 차이에 의해 발생하는 교차류, 그리고 축류 등에 의해 유발되는 연료봉의 불안정성은 핵연료손상의 원인이 될 수 있으므로, 새로운 연료 개발 시 연료봉에 대한 진동 및 안정성 해석을 수행하여 연료봉 진동과 불안정성 발생 여부를 확인하고 있다. 본 연구에서는 새로 개발된 고리 2호기용 $16{\times}16$형 개량핵연료 집합체에 대한 연료봉의 진동 및 안정성 해석을 수행하여 지지격자 높이와 위치, 그리고 지지조건 등이 연료봉의 진동특성 및 안정성에 미치는 영향을 평가하였다 그리고 해석결과에 근거하여 개량연료 집합체에서 중간지지격자 높이와 각 지지격자의 위치를 제안하였다.

• Applied Microscopy
• /
• 제35권4호
• /
• pp.42-54
• /
• 2005

본 연구는 무당개구리과 (Discoglossidae)의 무당개구리(Bombina orientalis) 정자의 형태적 특징을 광학현미경과 주사 및 투과 전자현미경으로 관찰하였다. 정자두부는 전 후방의 끝이 뾰족하고 다소 유연성을 갖는 초생달 혹은 버들 잎 모양의 특이한 구조를 취하고 있었다. 핵은 전 후방이 가늘고, 중앙 부분은 굵은 원뿔형이었다. 염색질은 완전하게 농축되어 있지 않고, 마치 널빤지를 겹쳐 놓은 듯한 지붕모양과 같은 형태로 불규칙하게 배열되어져 있었다. 핵 내에는 불규칙한 형태의 nuclear lacunae들이 흩어져 있었다. 정자경부와 중편부는 발달 되어 있지 않았다. 편모는 9+2 구조의 axoneme, axial rod 그리고 undulating membrane을 가지고 있었다. 미토콘드리아들은 핵의 상단부를 둘러싸고 있는 protoplasmic bead내에만 국한되어 존재하고 있었다. 특히, 본 연구에서 핵의 전방부에서 중앙 부위로 주행하는 nuclear rod는 섬유성 다발로 구성되었으며, 마치 사람의 속눈썹 모양과 같은 형태를 취하며, 핵의 2/3까지 뻗쳐져 있었다.

• Steel and Composite Structures
• /
• 제21권2호
• /
• pp.357-371
• /
• 2016

Column base connections are critical components in steel structures because they transfer axial forces, shear forces and moments to the foundation. Exposed column bases are quite commonly used in low- to medium-rise buildings. To investigate shear transfer in exposed column base plates, four large scale specimens were subjected to a combination of axial load (compression or tension) and lateral shear deformations. The main parameters examined experimentally include the number of anchor rod, arrangement of anchor rod, type of lateral loading, and axial force ratio. It is observed that the shear resisting mechanism of exposed column base changed as the axial force changed. When the axial force is in compression, the resisting mechanism is rotation type, and the shear force will be resisted by friction force between base plate and mortar layer. The specimens could sustain inelastic deformation with minimal strength deterioration up to column rotation angle of 3%. The moment resistance and energy dissipation will be increased as the number of anchor rods increased. Moreover, moment resistance could be further increased if the anchor rods were arranged in details. When the axial force is in tension, the resisting mechanism is slip type, and the shear force will be resisted by the anchor rods. And the shear resistance was reduced significantly when the axial force was changed from compression to tension. The test results indicated that the current design approach could estimate the moment resistance within reasonable acceptance, but overestimate the shear resistance of exposed column base.

• Nuclear Engineering and Technology
• /
• 제56권7호
• /
• pp.2756-2766
• /
• 2024

Small rod-controlled pressurized water reactors (PWR) are the ideal energy source for vessel propulsion, benefiting from their high reactivity control efficiency. Since the control rods (CRs) increase the complexity of reactivity control, this paper seeks to study the performance of CRs in small rod-controlled PWRs to extend the lifetime and reduce power offset due to CRs. This study investigates CR grouping, move-in/out strategies, and axially non-uniform design effects on core neutron physics metrics. These metrics include axial offset (AO), core lifetime (CL), fuel utilization (FU), and radial power peaking factor (R-PPF). To simulate the movement of the CRs, a "Critical-CR-burnup" function was developed in OpenMC. In CR designs, the CRs are grouped into three banks to study the simultaneous and prioritized move-in/out strategies. The results show CL extension from 590 effective full power days (EFPDs) to 638-698 EFPDs. A lower-worth prioritized strategy minimizes AO and the extremum values decrease from -0.69 and + 0.81 to -0.28 and + 0.51. Although an axially non-uniform CR design can improve AO at the beginning of cycle (BOC), considering the overall CR worth change is crucial, as a significant decrease can adversely impact axial power distribution during the middle of cycle (MOC).

• 한국어업기술학회:학술대회논문집
• /
• 한국어업기술학회 2000년도 추계수산관련학회 공동학술대회발표요지집
• /
• pp.246-247
• /
• 2000

수서동물 생식소의 해부학적 구조 및 생식세포의 미세구조는 종 특이성, 생식생태 및 계통에 따라 다르다. 일반적으로 이매패류의 정자는 각 분류군에 따라 핵과 첨체의 모양, 첨체의 axial rod, 미토콘드리아 수, 편모의 수 및 형태 등에서 다양한 특징을 보인다 (Morse and Zardus, 1997). Anadara trapez 등이 속하는 돌조개과 (Arcidae) 패류들의 정자 두부는 난형이며, 첨채에 axial rod가 없고, 중편에 4개의 미토콘드리아를 가진다. (중략)

• 제어로봇시스템학회논문지
• /
• 제17권9호
• /
• pp.882-887
• /
• 2011

A spiral electrodynamic wheel is proposed as an actuator for the contactless conveyance of a conductive rod. When rotating the wheel around the rod, a radial force, a tangential force, and an axial force are generated on the rod and cause a screw motion of the rod. The rotation of the rod is the inevitable result due to traction torque of the wheel and the unintended motion to be excluded. However, the rotating speed of the rod should be measured without mechanical contact to be cancelled out through the controller, so the electrodynamic wheel is used as a sensor measuring the rotating speed of the rod indirectly as well as an actuator. In this paper, we model the magnetic forces by the proposed wheel theoretically and compare the derived model with simulation result by Maxwell, and analyze influences on the magnetic forces by key parameters constituting the wheel. The feasibility of the conveyance system is verified experimentally.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.454-460
• /
• 1998

The vibration behavior of fuel rods has been analyzed by FEM in consideration of axial force and support spring constants. The axial compression force on the fuel rod in reactor decreases with the fuel rod burnup, and its decrease makes the natural frequencies of fuel rod considerably increase. The change of support spring constant can contribute to the remarkable change of the mode shapes, but not greatly to the natural frequencies. The reaction forces of support springs are obtained from normalizing the lst mode with the max. 0.2 mm displacement. The calculated reaction forces are larger than the previous results obtained by disregarding the deflections of the support springs.

• Structural Engineering and Mechanics
• /
• 제4권3호
• /
• pp.330-344
• /
• 1996

A model of a cable comprising interacting wires with dry friction forces at the interfaces is subjected to a quasi-static cyclic loading. The first cycle of this process, comprising of axial loading, unloading and reloading is investigated analytically. Explicit load-elongation relationships are obtained for all of the above phases of the cycle. An expression for the hysteretic losses is also obtained in an explicit form. It is shown that losses are proportional to the third power of the amplitude of the oscillating axial force, and are in inverse proportion to the interwire friction forces. The results obtained are used to introduce a model of a cable as a solid rod with an equivalent stiffness and damping properties of the rod material. It is shown that the stiffness of the equivalent rod is weakly nonlinear, whereas the viscous damping coefficient is proportional to the amplitude of the oscillation. Some numerical results illustrating the effect of cable parameters on the losses are given.