• Journal of Welding and Joining
• /
• 제28권2호
• /
• pp.60-65
• /
• 2010

Although two dimensional axi-symmetric modeling is useful for calculating the residual stresses of a cylindrical weldment such as a core barrel, this conventional axi-symmetric modeling can not express the behavior of shrinkage well in the locally heated weld zone. New technique of two dimensional axi-symmetric modeling using a virtual fixture is suggested to simulate the behavior of dimensional changes in the weld zone during the heating period of the welding. The virtual fixture in the model has a role to restrain the expansion of the high temperature heated region, which simulates equivalent intrinsic restraint effect of the weldment. In the restraint condition of the virtual fixture above the critical yield strength, the calculated shrinkages by using the suggested axi-symmetric model agreed well with those measured in a welded mock-up. The calculated residual stresses by using the suggested axi-symmetric model also agreed well with those calculated by using conventional axi-symmetric model which has beenused for calculating residual stresses in the weldment.

• 소성∙가공
• /
• 제12권6호
• /
• pp.550-557
• /
• 2003

In this study, a web-based system was developed by utilizing finite element method and virtual system designed using Virtual Reality Modeling Language (VRML). The simulation program for axi-symetric sheet forming is developed using finite flement method. The developed system consists of two modules, client module and server module. The client module was developed by using Active-X control. The input data for FEM calculation is transferred to the server module by using communication protocol. Then sever module performs several successive processes: input data generation, forming simulation, conversion of results to VRML format. After that, the results from the simulation can be visualized on the web browser in client computer. Besides, client module offers the capability to control and navigate on virtual forming machine and calculated result. By using this system simulation result can be investigated more realistically in virtual environment including forming machine.

• 대한기계학회논문집
• /
• 제16권11호
• /
• pp.2082-2089
• /
• 1992

본 연구에서는 모델링재료를 이용한 AISI4130축대칭 도움형상의 열간 단조 공 정 설계 방안을 이룩하기 위한 실험을 수행하였다. 본 실험에 사용된 모델링 재료는 Van Akan International사 제품의 Plastalina를 이용하였다. 모델링재료와 실제 재 료 사이의 상사성을 검토하기 위해 압축실험을 수행하였는데 압축 실험시 모델링재료 와 평다이 사이의 마찰력을 줄이기 위해 베이비파우더, 휴지, 바셀린, 테프론테잎 등 을 이용하였으며 램 속도, 온도, 그리고 변형률도에 따른 응력 변화를 검토해 보았다. 열간 공정시에 수반되는 금형과 공작물 사이의 마찰력을 알아보기 위해 앞에 열거한 윤활제를 이용한 링실험을 수행하여 전단마찰계수(m) 값의 변화를 알아보고 폐쇄단조 시 주요한 설계방안을 검토하기 위해 플래쉬를 갖는 폐쇄단조 실험을 수행하였다. 이 실험에서는 폐쇄단조시 중요한 설계변수 중의 하나인 플래쉬 두께 대 폭비, 플래쉬 부를 통한 체적손실, 그리고 원기둥모양의 초기 단조 시편 형상비 등에 따른 설계방안 을 검토하여 기존 참고문헌에 나와 있는 결과들과 유사성을 검토하였다. 이와같은 실험 결과를 체계적으로 확립하고 고강도강 대형 단조품생산에 필요한 단조하중 예측, 예비성형체 설계, 성형성 연구등에 대한 응용성을 검토하고자 한다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 사면안정 학술발표회
• /
• pp.213-220
• /
• 2000

Numerical modeling of cut slope has some limits in simulating the real slopes. In the case of 2D analysis of slope stability, it is assumed that slope is simply straight even when it is concave or convex in plan view. In this study, 3D analysis in curved shape slopes has been conducted for the comparison with 2D analysis in terms of failure mode and factor of safety. For this, 3D analysis by FLAC3D was compared with 2D analysis in plane strain condition and axi-symmetric model condition by FLAC. It was also observed how safety factors of slopes were affected by the variation of the tensile strength and cohesion, which are important variables to decide whether the slope fails or not. 2D analysis of concave slopes under plane strain condition showed much smaller safety factors by 16-40 % errors depending on the radius of curvature of slopes, compared to the more realistic values from 3D analysis. In case of convex slopes, the lower values by 7-10 % has been reported. 2D analysis of axi-symmetric model showed also smaller safety factors by 6-10 % and by 2-4 %, in case of concave and convex slopes, respectively. Such results are expected to contribute to the better understanding of failure process and could be applied for improved design of slopes.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제32회 KOSCO SYMPOSIUM 논문집
• /
• pp.39-45
• /
• 2006

Analysis of the internal state of the blast furnace is needed to predict and control the operating condition. Especially, it is important to develop modeling of blast furnace for predicting cohesive zone because shape of cohesive zone influences overall operating condition of blast furnace such as gas flow, chemical reactions and temperature. because many previous blast furnace models assumed cohesive zone to be fixed, they can't evaluate change of cohesive zone shape by operation condition such as PCR, blast condition, and production rate. In this study, an axi-symmetric 2-dimensional steady state model is proposed to simulate blast furnace process. In this model, cohesive zone is changed by solid temperature range, FVM is used for numerical simulation. To find location of cohesive zone whole calculation procedure is iterated Until cohesive zone is converged. Through this approach, shape of cohesive zone, velocity, composition and temperature within the furnace are predicted by model.

• Wind and Structures
• /
• 제26권3호
• /
• pp.147-161
• /
• 2018

For wind engineering applications downbursts are, presently, almost exclusively modeled, both experimentally and numerically, as transient impinging momentum jets (IJ), even though that model contains none of the physics of real events. As a result, there is no connection between the IJ-simulated downburst wind fields and the conditions of formation of the event. The cooling source (CS) model offers a significant improvement since it incorporates the negative buoyancy forcing and baroclinic vorticity generation that occurs in nature. The present work aims at using large-scale numerical simulation of downburst-producing thunderstorms to develop a simpler model that replicates some of the key physics whilst maintaining the relative simplicity of the IJ model. Using an example of such a simulated event it is found that the non-linear scaling of the velocity field, based on the peak potential temperature (and, hence, density) perturbation forcing immediately beneath the storm cloud, produces results for the radial location of the peak radial outflow wind speeds near the ground, the magnitude of that peak and the time at which the peak occurs that match well (typically within 5%) of those produced from a simple axi-symmetric constant-density dense source simulation. The evolution of the downdraft column within the simulated thunderstorm is significantly more complex than in any axi-symmetric model, with a sequence of downdraft winds that strengthen then weaken within a much longer period (>17 minutes) of consistently downwards winds over almost all heights up to at least 2,500 m.

• 천문학회보
• /
• 제37권1호
• /
• pp.55.2-55.2
• /
• 2012

Silicate-carbon stars are characterized by oxygen-rich (O-rich) dust features despite their carbon-rich (C-rich) photospheres. While the origin of silicate-carbon stars has been a mystery ever since their discovery, the most widely accepted hypothesis is that the silicate-carbon stars have a low-luminosity companion and the O-rich material is stored in a circumbinary disk or a circumstellar disk even after the primary star becomes a carbon star. In order to study the properties of circumstellar dust envelopes of silicate-carbon stars, we perform radiative transfer model calculations using RADMC-3D with an axi-symmetric dust density distribution (a disk) as well as a spherically symmetric dust distribution. For various dust envelope models with different shapes and chemistry, we calculate the model spectral energy distributions (SEDs) and compare the model results with the observed SEDs of selected 5 silicate-carbon stars. The Circumstellar disk models are fairly well fitted with the observational data of 5 silicate-carbon stars. We find some evidences that the circumbinary disk model could be a better explanation for the origin of silicate carbon stars than the simple detached silicate dust shell model of the transition phase of the stellar chemistry.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2038-2043
• /
• 2007

Analysis of the internal state of the blast furnace is needed to predict and control the operating condition. Especially, it is important to develop modeling of blast furnace for predicting cohesive zone because shape of cohesive zone influences on overall operating condition of blast furnace such as gas flow, temperature distribution and chemical reactions. Because many previous blast furnace models assumed cohesive zone to be fixed, they can't evaluate change of cohesive zone shape by operation condition such as PCR, blast condition and production rate. In this study, an axi-symmetric 2-dimensional steady state model is proposed to simulate blast furnace process using the general purpose-simulation code. And Porous media is assumed for the gas flow and the potential flow for the solid flow. Velocity, pressure and temperature distribution for gas and solid are displayed as the simulation results. The cohesive zones are figured in 3 different operating conditions.

• 한국표면공학회지
• /
• 제46권3호
• /
• pp.133-138
• /
• 2013

We have developed a 2D axi-symmetric numerical model for an inductively coupled plasma system in order to analyze gas mixing effect through a narrow gap shower head. For frictional flow, holes of 0.5 mm diameter and 2 mm length are approximately modeled in 2D. Gas velocity distribution 10 mm below the shower head showed 2 times difference between the center and the edge at 10 mTorr. At 10 mm above the wafer, it was increased to 6 times difference due to the pumping duct effect. The model with a 5 mm height buffer region of a shower head showed reasonable behavior of Ar discharge. The density of Ar metastable showed additional peak inside the buffer region around the edge holes.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.13-16
• /
• 2002

In this research, the design methods of the rocket joint parts were suggested. In the first section, nonlinear finite element analyses for joint parts of a composite pressure tank were performed. In the analyses, the detailed finite element modeling was performed and complex boundary conditions(contact problem, clamping force) were considered. Secondly, several guidelines for the design of joint parts were suggested. The parametric study for geometric design variables was peformed. Finally, the parametric study result was categorized for the multi-Joint part design of the axi-symmetric composite structure.