• 소성∙가공
• /
• 제12권6호
• /
• pp.550-557
• /
• 2003

In this study, a web-based system was developed by utilizing finite element method and virtual system designed using Virtual Reality Modeling Language (VRML). The simulation program for axi-symetric sheet forming is developed using finite flement method. The developed system consists of two modules, client module and server module. The client module was developed by using Active-X control. The input data for FEM calculation is transferred to the server module by using communication protocol. Then sever module performs several successive processes: input data generation, forming simulation, conversion of results to VRML format. After that, the results from the simulation can be visualized on the web browser in client computer. Besides, client module offers the capability to control and navigate on virtual forming machine and calculated result. By using this system simulation result can be investigated more realistically in virtual environment including forming machine.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.123-128
• /
• 2000

Fundamental and informative data of axi-symmetric stretch-drawing of several sheetmetals with thicknesses of 0.7-1.0mm are presented both for single and double operations. Very small radius is applied to the die profile (or-shoulder) ion all operations. to induce wall-thinning by the effect of bending-under-tension from which the name 'stretch-drawing' comes. It is clearly demonstrated that deeper cups could be formed by single and double stretch-drawings from smaller circular blanks due to such wall-thinning action than in the usual deep-drawing of larger blanks, From this fact it is emphasized that the deep-drawability of a sheet metal is not evaluated simply by the conventional L.D.R (limiting drawing ratio) but the depth of the drawn cup should also be taken into account./ Many experimental data about various metals and thicknesses given in this paper offer a valuable information in this process for more general use which recommends to replace the conventional deep-drawing process by the stretch-drawing process both for single and double operations. In the single stretch-drawing it is also confirmed that a deeper cup can be produced by raising the blank-holding force at later stage of operation.

• 한국산학기술학회논문지
• /
• 제1권2호
• /
• pp.21-26
• /
• 2000

플로포밍은 무절삭 점진성형공정으로 축 대칭 원형제품의 다품종 소량생산에 있어 스템핑이나 딥드로잉과 같은 박판성형 공정과 비교했을 때 매우 경제적이며 효율적인 공정이다. 본 연구에서는 기존 공정과의 품질비교를 통한 플로포밍 공정의 유용성 검토를 위해 현재 프레스 드로잉 공정으로 생산중인 자동차용 자동변속기 부품을 1-롤러 플로포밍 공정을 이용하여 대체 성형해 보았다. 실험결과 플로포밍 공정은 제조부품의 형상변화에 따른 설비변경 비용과 개발기간이 짧아 효과적인 유연 생산 시스템임을 알 수 있었다. 또한 플로포밍 공정을 프레스 드로잉 공정과 연계하여 성형하면 성형품의 정밀도와 생산성 향상에 매우 효과가 있음을 알 수 있었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.195-199
• /
• 2001

The flow turning process, an incremental forming process, is a cost-effective forming method for axi-symmetric intricate parts to net shape. However, the flow turning process shows a fairly complicated deformation, it is very difficult to obtain satisfactory results. Therefore extensive experimental and analytical research has not been carried out. In this study, an fundamental experiment was conducted to improve productivity with process parameters such as tool path, angle of roller holder($\alpha$), feed rate(v ) and comer radius of forming roller(Rr). These factors were selected as variables in the experiment because they were most likely expected to have an effect on spring back. The clearance was controlled in order to achieve the precision product which is comparable to deep drawing one. And also thickness and diameter distributions of a multistage cup obtained by flow turning process were observed and compared with those of a commercial product produced by conventional deep drawing.

• 한국정밀공학회지
• /
• 제18권9호
• /
• pp.186-191
• /
• 2001

Spinning process is a chipless metal forming method for axi-symmetric parts, which is more economical, efficient and versatile method for producing parts than the other sheet metal forming process such as stamping or deep drawing. In this study, a fundamental experiment was conducted to improve productivity with process parameters such as tool path, angle of roller holder($\alpha$), feed rate($\gamma$) and corner radius of forming roller(Rr). These factors were selected as variables in the experiment because they were most likely expected to hale an effect on spring back. The empirical results were analyzed to know how much spring back was affected by these factors. And also thickness and diameter distribution of a multistage cup obtained by spinning process were observed and compared with those of a commercial product produced by conventional deep drawing.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.837-841
• /
• 2000

Spinning process is a chipless metal forming method for axi-symmetric parts, which is more economical, efficient and versatile method of producing parts than the other sheet metal forming process such as stamping or deep drawing. It is a point deformation process where a metal disc. cylinderical workpiece. or preform in contact with a rotating chuck is plastically deformed by axial or axial-radial Motions of a tool or roller. in this study the variation of spring back with respect to various forming roller corner radius(Rr) and angle of roller holder($\alpha$) is investigated. Good as a result will help to get more precise shape by control of spring back.