• Clinical and Experimental Reproductive Medicine
• /
• 제11권2호
• /
• pp.77-81
• /
• 1984

Epididymal biopsy has been performed without consideration of the possibility of epididymal ductal severance and obstruction which result in obstructive azoospermia. An attempt was made to study the effect of the epididymal biopsy on the obstruction of the epididymal ducts. Bilateral epididymal biopsies were done in 8 healthy rabbits (New Zealand White strain) weighing over 3 kg, and then ejaculated semens have been analyzed 5 times every other week from 1 month after biopsies. Microscopic examination of the biopsied epididymides was also done after the 5th semen analysis. The results were as follows. 1. Semen analysis: 6 out of 8 rabbits showed azoospermia from the 4th semen analysis and 2 cases showed normal number of the sperms in the 5th semen analysis. 2, Microscopic examination: 6 cases of azoospermia showed complete obstruction of the biopsied sites of the epididymides, and abscence of sperms in epididymal ducts distal to the biopsied sites of the epididymides. However, recanalization of the epididymal ducts was noted in 2 cases showing normal sperm count. Therefore, it is concluded that the epididymal biopsy should be avoided in patients who want to be fertile, because it may cause the epididymal severance and obstruction of the epididymal ducts.

• 한국전산유체공학회지
• /
• 제7권3호
• /
• pp.17-26
• /
• 2002

Computational fluid dynamic(CFD) analysis has been frequently applied to the waste incinerators to understand the flow performance for various design and operating parameters. Since the computational modeling inevitably requires many simplifications and complicated sub-models, validity of the results should be carefully evaluated. In this study, major computational modeling and procedure of usual simulation methods for the grate-type waste incinerators were assessed. Usual simulation method does not explicitly incorporate the waste combustion, simply by assuming the combustion gas properties from the waste bed which is treated as an inlet plane. However, effect of this arbitrary assumption on the overall flow pattern is not significant, since the flow pattern is dominated by strong pattern of jet flows of the secondary air. Thus, this method is valid in understanding the effect of flow-related parameters. In analyzing the results, deriving conclusive information directly from temperature and chemical species concentration should be avoided, since the model prediction for the gaseous reaction and the radiation reveals significant discrepancies against the actual phenomena. Use of quantitative measures such as residence time is very efficient in evaluating the flow performance.

• 아동학회지
• /
• 제31권1호
• /
• pp.83-99
• /
• 2010

This study examined whether children's self-esteem has a mediating effect upon the need for peer approval in terms of both depression and social competence. The participants of this study were 393 5th graders in Seoul and Gyeonggi-do. The children filled out questionnaires on the need for peer approval, self-esteem and depression. Teachers were asked to rate the levels of the children's social competence. Data were analyzed by means of structural equation modeling. Our results indicated that self-esteem mediated effects of the need for peer approvals on children's depression. Children who sought positive approval from peers had higher self-esteem, which in turn lowered the level of children's depression. Children who avoided negative approval from peers had lower self-esteem, which in turn contributed to children's depression. However, self-esteem did not have a mediating effect upon the need for peer approval in terms of children's social competence.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권3호
• /
• pp.316-323
• /
• 1995

A vital step in magnetic tape manufacturing is the surface modification of polymer substrate prior to ink application. A critical element for good adhesion of magnetic ink on polymeric substrate is the ability to join ink in cost-effective manner. Corona discharging is one of the effective methods of modifying polymer surface to improve adhesion while maintaining the desirable properties of the film itself. Surface treatment by corona which is exposure of film surface to electron or ion bombardment, rather than mere exposure to active species, like atomic oxygen or ozone, can enhance adhesion by removing contaminant, electret, roughening surface, and/or introducing reactive chemical groups. Reactive neutrals, ions, electron and photons generated during the corona treatment interact simultaneously with polymers to alter surface chemical composition, wettability, and thus film adhesion. However, it is highly recommended that extensive chains scission be avoided because it can lead to side-effect by forming sticky matter, resulting in dropouts. This paper reviews principles of surface preparation of polymer substrate by corona discharging. In addition, the experimental section provides a description of parameter optimization on corona discharging treatment and its side-effect. Experimental results are discussed in terms of surface wetting as determined by contact angle measurements.

• Steel and Composite Structures
• /
• 제26권3호
• /
• pp.265-272
• /
• 2018

A detailed study was carried out on the tensile properties of the single-lap joint of a steel panel bolted/bonded to a composite laminate with a flanging. Finite element model (FEM) was established to predict the strength and to analyze the damage propagation of the hybrid joints by ABAQUS/Standard, which especially adopted cohesive elements to simulate the interface between the laminate and adhesive. The strength and failure mode predicted by FEM were in good agreement with the experimental results. In addition, three influence factors including adhesive thickness, bolt preload and bolt-hole clearance were studied. The results show that the three parameters have effect on the first drop load of the load-displacement curve, but the effect of bolt-hole clearance is the largest. The bolt-hole clearance should be avoided for hybrid joints.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 추계학술발표대회 개요집
• /
• pp.192-194
• /
• 2005

Joint strength of spot friction welded 5J32 Al alloy were investigated according to the tool shape and the tool penetration depth. General spot friction stir welding tool consists of a shoulder having bigger diameter and a threaded pin projected from the shoulder, which resulted in the generation of large up-lifting of upper plate around the weld nugget because of the deeper penetration and the severe stirring effect of threaded pin. Two kinds of welding tools without the threaded pin were used to avoid the distortion and improve the joint strength. One was a simple cylindrical shape and the other was cylindrical shape with small projection. Therefore, the process was named as spot friction welding comparing to spot friction stir welding because spot friction welding don't use a stirring effect. Using the cylindrical shape tool with small projection, the up-lifting of upper plate were avoided and joint strength were superior to that of the joint using simple cylindrical shape tool. At the 0.5mm of too penetration depth using cylindrical tool with small projection, nugget pull fracture mode can be observed and shear fracture mode were dominant at the rest conditions.

• 분석과학
• /
• 제8권4호
• /
• pp.739-744
• /
• 1995

The two main methods to prepare water samples for analyzing volatile organic compounds(VOC's) were investigated. One is the purge and trap(PT) method and another is the head space(HS) sampling method. Both methods were effective to transfer the low boiling point components from the water sample onto the capillary column. The cryo-focusing at the top of the main capillary column was an effective way to obtain the sharpness of the chromatographic peaks but could be avoided when a semi-wide bore column was used. The recovery from the same amount of the sample was better in PT than in HS but a larger sample volume in HS method could compensate the lower efficiency. Therefore PT is suitable to the analysis of drinking water where the very low concentration must be determined. HS is suitable to waste water analysis because of the easiness of the operation. The repeatability was good and similar in both methods. For the contamination of the former sample, both methods were tough and could be used without any problems. The matrix effect which could change the equilibrium parameters in HS method was find negligible in many components. The actual samples such as tap water and river water were analyzed with both methods concerning 16 components regulated in Korea.

• 대한전자공학회논문지
• /
• 제22권5호
• /
• pp.69-74
• /
• 1985

본 논문에서는 먼저 Sensitivity가 가장 낮은 LC Ladder 필터로 부터 FDNR frequency dependent negative resists.) 방식을 이용하여 5차 Butterworth 저역 통과 능동 RC필터를 설계하였으며 능동 RC 필터를 SCF(switched capacito, filter)로 변조하는 과정에서 Bilinear Z변환을 이용하였다. Bilinear Z 변환으로 설계된 SCF에서 aliasing 현상은 피할수 있으나 주파수 대곡이 발생한다. 아나로그 필터를 디지틀 릴터로 변환하면 이러한 영향으로 속단 주파수 영역이 일치하지 않으므로 이것을 적게 하기 위하여 Prewarping을 해준다. 그 결과 Prewarping된 SCF는 Bilinear Z 변환된 SCF보다 각파수 이유이 현저하게 개선됨을 확인하였다.

• 한국군사과학기술학회지
• /
• 제13권6호
• /
• pp.998-1005
• /
• 2010

Rifling force has a torsion impulse effect on the gun tube and thus generates undesirable vibration of the gun tube about its bore axis, putting additional stress on the projectile. High rifling force at the muzzle of the gun tube may adversely influence the trajectory of the projectile. And, the service life of rifled gun barrels is known to depend on the rifling force. Rifling force along the path of the projectile in the longitudinal direction of the gun tube can be described with projectile mass, projectile velocity, gas pressure curve and rifling angle. Under the same conditions, the character of the rifling of the gun barrel decisively influences the rifling force curve. To reduce the above mentioned harmful effect, locally distinct maximum of rifling force has to be avoided and maximum rifling force needs to be minimized. The best way to minimize the maximum rifling force is to design a rifling angle function so that the rifling force curve has a near trapezoidal shape. In this paper a new approach to make the optimal rifling force curve is described. The rifling angle determining the rifling force is developed by combined Fourier series and polynomial function to satisfy both the convergence and boundary condition matching problems.

• Coupled systems mechanics
• /
• 제9권2호
• /
• pp.183-200
• /
• 2020

Connection of adjacent buildings with stiff links is an efficient approach for seismic pounding mitigation. However, use of highly rigid links might alter the torsional response in asymmetric plans and although this was mentioned in the literature, no quantitative study has been done before to investigate the condition numerically. In this paper, the effect of rigid coupling on the elastic lateral-torsional response of two adjacent one-story column-type buildings has been studied by comparison to uncoupled structures. Three cases are considered, including two similar asymmetric structures, two adjacent asymmetric structures with different dynamic properties and a symmetric system adjacent to an adjacent asymmetric one. After an acceptable validation against the actual earthquake, the traditional random vibration method has been utilized for dynamic analysis under Ideal white noise input. Results demonstrate that rigid coupling may increase or decrease the rotational response, depending on eccentricities, torsional-to-lateral stiffness ratios and relative uncoupled lateral stiffness of adjacent buildings. Results are also discussed for the case of using identical cross section for all columns supporting eachplan. In contrast to symmetric systems, base shear increase in the stiffer building may be avoided when the buildings lateral stiffness ratio is less than 2. However, the eccentricity increases the rotation of the plans for high rotational stiffness of the buildings.