• Journal of Advanced Navigation Technology
• /
• v.22 no.3
• /
• pp.205-212
• /
• 2018

Spontaneous ignition is not only severe economic damage but also a typical plant damage caused by harmful gases generated during the fire. Because coal is porous, it causes oxygen to be absorbed in the amount of oxygen per unit weight of oxygen, resulting in low humidity and low thermal conductivity. The cause and effect of spontaneous ignition are very complex, so it is difficult to prevent it beforehand and once it is difficult to digest it, it is difficult to digest it. This study examines structural safety by conducting a structural analysis of the cooling ball system to prevent spontaneous combustion of coal stockpile plants and external pressures.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.1
• /
• pp.66-83
• /
• 2015

Global Positioning System(hereafter; GPS) is recently an essential element in the various navigation and weapon delivery systems of military aircraft. However, GPS is vulnerable to the jamming threats since its signal power is very weak. Therefore, ROK defense has been concerning how to resolve this issue and how to integrate these systems needed, and is trying to acquire the proper anti-jamming GPS system. This study is to provide several schemes against the jamming threats effectively. We propose the several processes to analyze the required capability and demonstrate the result's of modeling and simulations(hereafter; M&S) for this integration of military aircraft, and the mathematical programming model for system optimization of military aircraft anti-jamming GPS system on the basis analysis of M&S results which could be considered available budget and the project characteristic. These schemes will be helpful on proper acquisition of these systems and. We are looking forward to contributing to the integration of anti-jamming GPS system of ROK military aircraft.

• Journal of Advanced Navigation Technology
• /
• v.21 no.6
• /
• pp.544-548
• /
• 2017

The International Civil Aviation Organization is recommending the use of SBAS on all aircraft by 2025 to urge PBN implementation around the world. As part of this, Korea is also developing KASS, a Korean SBAS. ICAO grants authority to the host nation aviation authority in the certification and operation of SBAS. The KASS system will be verified after detailed system design, fabrication and installation. In this paper, flight test parameters are derived from the flight inspection regulations and the configuration of the on - board measurement equipment for measuring the parameters has been proposed.

• Journal of Advanced Navigation Technology
• /
• v.14 no.5
• /
• pp.604-609
• /
• 2010

The tactical datalink system has been recognized as the key element in Network Centric Warfaret(NCW). The military has been putting great efforts into establishing datalink system using existing tactical radio and UMPC. but the aircraft operational environment and the requirement specification for equipments mounted in the avionics are differentiated with those in other platforms, so special efforts are needed to select suitable UMPC. In this paper, we consider the requirement analysis for UMPC in respect of processor performance, operation system (OS) and NVG compatibility. Additionally we have to make a effort to understand the operational environment of aircraft and examine th standard to select the appropriate UMPC, and then we expect to establish the tactical datalink system successfully.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.12
• /
• pp.1181-1188
• /
• 2014

In this paper, we propose a novel concept foran unmanned delivery service using a cooperative heterogeneous unmanned system consisting of a self-driving car and an unmanned aerial vehicle (UAV). The proposed concept is suitable to deliver parcels in high-density and high-rise urban or residential areas. In order to achieve the proposed concept, we will develop acooperative heterogeneous unmanned system. Customers can order goods using a smartphone application and the order information, including the position of the customer and the order time, and the package is transported automatically by the unmanned systems. The system assigns the tasks suitable for each unmanned vehicle by analyzing it based on map information. Performance is validated by experiments consisting of autonomous driving and flight tests in a real environment. For more evaluation, the landing position error analysis is performed using circular error probability (CEP).

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.4
• /
• pp.675-687
• /
• 2017

In the aerospace industry, we have produced various models according to operational conditions and the environment after development of the base model is completed. Therefore, when design change is necessary, there are modification and updating costs of the circuit whenever environment variables change. For these reasons, recently, in various fields, system designs that can flexibly respond to changing environmental conditions using field programmable gate arrays (FPGAs) are attracting attention, and the rapidly changing aerospace industry also uses FPGAs to organize the system environment. In this paper, we design the controller area network (CAN) intellectual property (IP) protocol used instead of the avionics protocol that includes ARINC-429 and MIL-STD-1553, which are not suitable for small unmanned aerial vehicle (UAV) systems at the register transistor logic (RTL) level, which does not depend on the FPGA vender, and we verify the performance. Consequentially, a Spartan 6 FPGA model-based system on chip (SoC) including an embedded system is constructed by using the designed CAN communications IP and Xilinx Microblaze, and the configured SoC only recorded an average 32% logic element usage rate in the Spartan 6 FPGA model.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.2
• /
• pp.213-221
• /
• 2011

Avionics system tends to be designed to have the integrated architecture, and it is getting difficult and complex to verify the flight-critical function because of sophisticated structure. In Korean Utility Helicopter, mission computer acts as the MUX Bus Controller to handle the data from both communication, identification, mission/display and survivability equipment inside Mission Equipment Package and aircraft subsystems such as fuel system and electrical system while it is interfacing with Automatic Flight Control System and Full-Authority Digital Engine Control via ARINC-429 bus. The Flight Displays which is classified as flight-critical function in aircraft is implemented on Primary Flight Display after mission computer processes data from AFCS in order to generate graphics. This paper defines the flight-critical function implemented in mission computer for KUH, and presents the static and dynamic test procedures which is performed on System Integration Laboratory along with Playback Recorder prior to flight test.

• Journal of Advanced Navigation Technology
• /
• v.19 no.2
• /
• pp.91-97
• /
• 2015

This paper specifies several considerations about assessing safety-critical software in the aerospace domain. In order to evaluate safety critical software in the aerospace industry, it is required to identify an information of evaluation criteria of software under evaluation. The information is specified in the standard, but determination of evaluation criteria cannot be decided by itself and depends on the results of safety assessment of a system and system design. Thus, this paper explains required information of system development standard and safety assessment standard to determine software evaluation criteria. It surveys existing methodologies about evaluating software, and suggests method which is adapted to evaluation of an advanced surface movement guidance and control system (A-SMGCS) software.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.4
• /
• pp.285-293
• /
• 2020

In this paper, to improve Synthetic Aperture Radar (SAR) image quality, the effect of time synchronization error in the EGI/IMU (Embedded GPS/INS, Inertial Measurement Unit) integrated system is analyzed and state augmentation is applied to compensate it. EGI/IMU integrated system is widely used as a SAR motion measurement algorithm, which consists of EGI mounted to obtain the trajectory and IMU mounted on the SAR antenna. In an EGI/IMU integrated system, a time synchronization error occurs when the clocks of the sensors are not synchronized. Analysis of the effect of time synchronization error on navigation solutions and SAR images confirmed that the time synchronization error deteriorates SAR image quality. The state augmentation is applied to compensate for this and as a result, the SAR image quality does not decrease. In addition, by analyzing the performance and the observability of the time synchronization error according to the maneuver, it was confirmed that the time-variant maneuver such as rotational motion is necessary to estimate the time synchronization error adequately. In order to reduce the influence of the time synchronization error on the SAR image, the time synchronization error must be compensated by performing maneuver changing over time such as a rotation before SAR operation.

• Journal of Aerospace System Engineering
• /
• v.16 no.6
• /
• pp.1-7
• /
• 2022

A simulated radar terrain scan data generation method is employed for terrain following. This method scans the discrete terrain by sequentially radiating beams from the radar to the desired scan area with the same azimuth but varying elevation angles. The terrain data collected from the beam is integrated to generate the simulated radar terrain scan data, which comprises radar-detected points. However, these points can be located far from the beam centerline when the radar is far from them due to beam divergence. This paper proposes a geometry-based terrain scan data generation method for analysing simulated radar terrain scan data. The method involves detecting geometric points along the beam centerline, which forms the geometry-based terrain scan data. The analysis of the simulated radar terrain scan data utilising this method confirms that the beam width effects are accounted for in the results.