• International Journal of Aerospace System Engineering
• /
• v.7 no.1
• /
• pp.16-20
• /
• 2020

The recent trend is increasing towards the usage of polymer matrix composites since they have a wide variety of applications. They have applications in the field of aircraft and space industry, sporting goods, medical devices, marine and automotive applications and also in commercial usage. The most commonly used fibre-reinforced polymer matrix composite is Glass fibre reinforced epoxy (GFRE) composite which is used in aviation, sports and automotive industries. However, the strength of GFRE composites is not adequate for structural applications. Therefore, the current research focuses on increasing the strength of GFRE composites by reinforcing with micro Graphite (Gr) particulates. The Gr used is an ultra-fine powder with particle size 250 ㎛. Gr is known to have good wear resistance, thermal conductivity and can operate at high temperatures. Gr particulates are mixed with the epoxy matrix in various weight ratios. Hand-lay technique is used for fabricating the composites. Mechanical properties such as tensile strength, elongation, compressive strength and flexural strength are obtained experimentally to study the effect of change in Gr content (0-5 wt. %). The tests were done as per ASTM standards.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.1
• /
• pp.101-106
• /
• 2018

This study proposes a method of controller design for precise position control in the use of solenoid which is widely used in industrial field. First, we design a Luenberger's observer that can accurately estimate the disturbance and set the appropriate gain. Based on the observed state, a fractional PD controller is designed and applied to the position control. As a result, the fractional order controller can obtain almost the same control performance even if the target position is different. In addition, it was confirmed that the position error of the steady state is within 0.1 [%] and the rising time is within about 0.05 second.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.8
• /
• pp.461-472
• /
• 2020

In recent decades, the research field of entrepreneurship phenomenon has significantly increased in both quantity and sophistication. In Vietnam, paradoxically, while creating a new business venture has become a tendency, the interest in studying entrepreneurs seems not to be thoroughly investigated. This research aims to evaluate the factors that affect the entrepreneurial intention of information technology (IT) students in Vietnam. The authors make use of mixed methods including both quantitative research method and qualitative research method. The qualitative research method is employed to identify meanings, confirmations, adjustments, and compliments for concept-measurement variables in the conceptual model. Quantitative research is conducted from a sample of 424 IT senior students across many universities in Vietnam. Questionnaires have been sent to students to evaluate the measurement scale and appropriateness of the research model. Results from multiple regression highlighted five independent variables affecting the dependent variable, the entrepreneurial intention, in a descending order as following: entrepreneurial educational environment, personal characteristics, perception of feasibility, entrepreneurial supports, and financial accessibility. In addition, this research has proved that the variable attitudes towards entrepreneurship partially mediated among the interrelationship of the aforementioned variables. From this research, the authors make some recommendations to enhance entrepreneurial intentions of IT students in Vietnam.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2429-2432
• /
• 2000

Adaptive filter algorithm has been used for plant identifier and noise cancellation. This algorithm has been researched for performance enhancement of filtering. The design and development of a reliable system has been becoming a key issue in industry field because the reliability of a system is considered as an important factor to perform the system's function successfully. And the computing with reliability and fault tolerance is a important factor in the case of aviation and nuclear plant. This paper presents design of reliable adaptive filter with fault tolerance. Generally, redundancy is used for reliability. In this case it needs computing or circuit for voting mechanism or computing for fault detection or switching part. But this presented Filter is not in need of computing for voting mechanism, or fault detection. Therefore it has simple computing, and practicality for application. And in this paper, reliability of adaptive filter is analyzed. The effectiveness of the proposed adaptive filter is demonstrated to the case studies of plant identifier and noise cancellation by using DSP.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.502-507
• /
• 2019

We investigated theoretically the quantum optical transition properties of qusi 2-Dinensinal Landau splitting system, in Si. We apply the Quantum Transport theory (QTR) to the system in the confinement of electrons by square well confinement potential. We use the projected Liouville equation method with Equilibrium Average Projection Scheme (EAPS). In order to analyze the quantum transition, we compare the temperature and the magnetic field dependencies of the QTLW and the QTLS on two transition processes, namely, the phonon emission transition process and the phonon absorption transition process. Through the analysis of this work, we found the increasing properties of QTLW and QTLS of Si with the temperature and the magnetic fields. We also found the dominant scattering processes are the phonon emission transition process.

• Journal of Aerospace System Engineering
• /
• v.15 no.1
• /
• pp.32-39
• /
• 2021

Electric propulsion aircraft are being actively researched in the aviation field in recent years to solve environmental and noise problems caused by existing gas turbine engine. In particular, research on a thrust motor as a core component of an electric power propulsion system and an inverter for driving it is actively being conducted. In this paper, a motor with high specific power is selected to determine characteristics of aircraft that are sensitive to weight and volume. Power loss of the inverter is then simulated. In the simulation, the selected motor and power device were modeled using PSIM, a power electronics analysis tool. Inverter power loss according to switching frequency was then analyzed.

• International Journal of Computer Science & Network Security
• /
• v.21 no.12spc
• /
• pp.513-520
• /
• 2021

The purpose of the article is to study the impact of digitalization on the transformation of the banking system, taking into account current innovative development trends. The article analyzes the impact of key factors on the development of the digital economy. Ukraine's ranking positions in terms of digital competitiveness are shown. The necessity of using digital technologies in the sphere of banking activity is substantiated. The dynamics of changes in the number of operating banks in Ukraine is analyzed. The directions of introduction of information technologies in the sphere of banking activity are determined. An analysis of changes in the share of the population of individual EU member states that use the Internet for Internet banking. It is noted that modern transformation trends, digitalization of the economy have a significant impact on the landscape of the banking sector, in this context, the rating of Ukrainian banks in the categories of "Internet Banking" and "Mobile Banking". The advantages and disadvantages of using the capabilities of Internet banking are identified. Based on the study, the importance of expanding the boundaries of digitalization of the domestic banking system is substantiated, which will further increase the level of availability of online services in the field of banking. Prospects for further research are identified in the study of the impact of digitalization on the development of the banking system of foreign countries.

• Economic and Environmental Geology
• /
• v.56 no.4
• /
• pp.397-408
• /
• 2023

A total of 64 specimens of trace fossils were collected from the Jinju Formation of the construction site of Jinju Aviation Industrial Complex, and from the Haman Formation of Namhae Gain-ri fossil site. The fossils are continuously and regularly meandering sine-curve in shape. The fossil varies in morphology: width between 0.2 and 5.6 mm, wavelength between 1.5 and 28 mm, and amplitude between 0.9 and 7.9 mm; the Jinju specimens are commonly wider than the Haman ones. The ratio of wavelength to amplitude is more or less regular regardless of width of the specimen, and the linear correlation of the ratios shows that the Jinju specimens fit better than the Haman specimens. Taking all morphometric parameters, specimens in all size ranges are temporarily identified as ichnospecies Cochlichnus anguineus. In order to obtain more distinct and clearer images of Cochlichnus, we selected two specimens and applied a new imaging technology RTI. For photography of the trace fossils, 50 to 80 images were taken per set with photometric lighting close to the surface and horizontally. RTI technology clearly showed that the images of tiny fossils were improved: the surface contrast become sharper and messy and unnecessary information disappeared. Currently, RTI technology is used in many fields including preservation of cultural properties and archaeology. As a consequence, we hope to apply this technique to the field of paleontology, especially to the study of trace fossils of very small size.

• Advances in nano research
• /
• v.15 no.3
• /
• pp.253-261
• /
• 2023

This study investigates the application of nano-composite materials in physical education, specifically focusing on improving the performance of sports hall flooring. The research centers on carbon nanotube reinforced polyvinyl chloride (PVC) composites, which offer enhanced mechanical properties and durability. The incorporation of carbon nanotubes as reinforcements in the PVC matrix provides notable benefits, including increased strength, improved thermal stability, electrical conductivity, and resistance to fatigue. The key parameters examined in this study are the weight percentage of carbon nanotubes and the temperature during the fabrication process. Through careful analysis, it is found that higher weight percentages of carbon nanotubes contribute to a more uniform dispersion within the PVC matrix, resulting in improved mechanical properties. Additionally, higher fabrication temperatures aid in repairing macroscopic defects, leading to enhanced overall performance. The findings of this study indicate that the utilization of carbon nanotube reinforced PVC composites can significantly enhance the strength and durability of sports hall flooring. By employing these advanced materials, the safety and suitability of physical education environments can be greatly improved. Furthermore, the insights gained from this research can contribute to the optimization of composite material design and fabrication techniques, not only in the field of physical education but also in various industries where composite materials find applications.

• Journal of Positioning, Navigation, and Timing
• /
• v.13 no.1
• /
• pp.15-23
• /
• 2024

One of the core keywords in the fourth industrial revolution is convergence, and the convergence of the production, distribution, and consumption processes of services is particularly important. The convergence of user services is underway in various industrial fields including mobile communications, healthcare, mobility, artificial intelligence, etc. In order to offer these converged services efficiently, it is necessary to provide accurate user-centric location information, which can be obtained by employing the global navigation satellite system (GNSS). In addition, as we have entered the post-COVID era, the demand for various fields such as a healthcare, customized tourism services, and aviation services based on accurate location information is exploding. In this paper, we present the results of a case study on the current research trends of GNSS used in telemedicine services and AI & IoT fields, and also analyze these results.