• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1323-1326
• /
• 2007

A new driving method employing 2-dimensional spatial averaging is proposed. This method successfully eliminates the vertical line artifact caused by luminance difference from unbalanced charging voltage between polarities. This spatial averaging method can secure charging time, minimize driver heating, and achieve higher display quality.

• 대한의생명과학회지
• /
• 제18권4호
• /
• pp.391-398
• /
• 2012

The conventional blink reflex has limited clinical application since it displays a wide range of change in the responses. Thus, we studied the blink reflex using the averaging process which is engaged in evoked potential studies in order to measure various responses such as latency, amplitude, and duration, which have been difficult to measure due to their wide ranges of changes. Among the Bell's palsy patient group, 13 patients who had the symptoms of incomplete palsy were examined to assess the results of the blink reflex through the averaging process. The subjects were 54 people in a normal group (108 eyes) and 18 patients (36 eyes) with Bell's palsy. For the study method, the conventional blink reflex and the blink reflex using the averaging process were measured for the people in the normal group, while in the Bell's palsy group, only the blink reflex using the averaging process was analyzed. In the case of the normal group, the blink reflex using the averaging process could measure all of the latency, amplitude, and duration. It was also observed that the latency, amplitude, and duration of R1, ipsilateral R2, and contralateral R2 significantly differed on the affected side of the Bell's palsy patients, compared to the unaffected side. The blink reflex using the averaging process should be more effective than the conventional method since the former can evaluate the latency, amplitude, and duration for Bell's palsy, while the latter can only assess latency.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권3호
• /
• pp.25-29
• /
• 2016

A quench detection system of KSTAR Poloidal Field (PF) coils is inevitable for stable operation because normal zone generates overheating during quench occurrence. Recently, new voltage quench detection method, combination of Central Difference Averaging (CDA) and Mutual Inductance Compensation (MIK) for compensating mutual inductive voltage more effectively than conventional voltage detection method, has been suggested and studied. For better performance of mutual induction cancellation by adjacent coils of CDA+MIK method for KSTAR coil system, balance coefficients of CDA must be estimated and adjusted preferentially. In this paper, the balance coefficients of CDA for KSTAR PF coils were numerically estimated. The estimated result was adopted and tested by using simulation. The CDA method adopting balance coefficients effectively eliminated mutual inductive voltage, and also it is expected to improve performance of CDA+MIK method for quench detection of KSTAR PF coils.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.131-134
• /
• 2002

Braided carbon fiber reinforced Al matrix composites were developed and characterized. Braided carbon fiber preforms with braiding angles of $30^{\circ}$, $45^{\circ}$ and $60^{\circ}$ were manufactured by using a braiding machine. The manufactured braided carbon fibers were used as reinforcement to fabricate Al matrix composites by employing a pressure infiltration casting method. In the processing of pressure infiltration casting, important processing parameters such as melting temperature, preheating temperature of preform and applied pressure were optimized. Prediction of elastic constants on composites was performed by using the volume averaging method, which utilizes the coordinate transformation and the averaging of stiffeness and compliance constants based upon the volume of each reinforcement and matrix material. The elastic moduli of composites were evaluated by using Resonant Ultrasound Spectroscopy(RUS) method and compared with the elastic moduli obtained from static tensile test method.

• Structural Engineering and Mechanics
• /
• 제15권6호
• /
• pp.669-683
• /
• 2003

The stochastic optimal nonlinear control of coupled adjacent building structures is studied based on the stochastic dynamical programming principle and the stochastic averaging method. The coupled structures with control devices under random seismic excitation are first condensed to form a reduced-order structural model for the control analysis. The stochastic averaging method is applied to the reduced model to yield stochastic differential equations for structural modal energies as controlled diffusion processes. Then a dynamical programming equation for the energy processes is established based on the stochastic dynamical programming principle, and solved to determine the optimal nonlinear control law. The seismic response mitigation of the coupled structures is achieved through the structural energy control and the dimension of the optimal control problem is reduced. The seismic excitation spectrum is taken into account according to the stochastic dynamical programming principle. Finally, the nonlinear controlled structural response is predicted by using the stochastic averaging method and compared with the uncontrolled structural response to evaluate the control efficacy. Numerical results are given to demonstrate the response mitigation capabilities of the proposed stochastic optimal control method for coupled adjacent building structures.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.739-744
• /
• 2007

Wind loads for cladding can be estimated using the maximum wind pressure including gust effects from wind-tunnel tests. However, when estimating the maximum wind pressure with gust effects, wind pressure coefficients for cladding would be different according to the averaging time of wind pressures, In the paper, for wind pressures obtained from wind-tunnel tests for apartment buildings, whose window panes were damaged by actual strong wind, it was investigated how pressure coefficients varied according to the size of cladding and averaging time using TVL method of Lawson. In result, it was found that the lesser the size of cladding and averaging time were, the larger pressure coefficients became. Accordingly, to estimate wind loads for cladding of apartment buildings and design it, the averaging time of wind pressures should be considered properly.

• Nuclear Engineering and Technology
• /
• 제50권4호
• /
• pp.589-598
• /
• 2018

To maintain safety and reliability of reactors, redundant sensors are usually used to measure critical variables and estimate their averaged time-dependency. Nonhealthy sensors can badly influence the estimation result of the process variable. Since online condition monitoring was introduced, the online cross-calibration method has been widely used to detect any anomaly of sensor readings among the redundant group. The cross-calibration method has four main averaging techniques: simple averaging, band averaging, weighted averaging, and parity space averaging (PSA). PSA is used to weigh redundant signals based on their error bounds and their band consistency. Using the consistency weighting factor (C), PSA assigns more weight to consistent signals that have shared bands, based on how many bands they share, and gives inconsistent signals of very low weight. In this article, three approaches are introduced for improving the PSA technique: the first is to add another consistency factor, so called trend consistency (TC), to include a consideration of the preserving of any characteristic edge that reflects the behavior of equipment/component measured by the process parameter; the second approach proposes replacing the error bound/accuracy based weighting factor ($W^a$) with a weighting factor based on the Euclidean distance ($W^d$), and the third approach proposes applying $W^d$, TC, and C, all together. Cold neutron source data sets of four redundant hydrogen pressure transmitters from a research reactor were used to perform the validation and verification. Results showed that the second and third modified approaches lead to reasonable improvement of the PSA technique. All approaches implemented in this study were similar in that they have the capability to (1) identify and isolate a drifted sensor that should undergo calibration, (2) identify a faulty sensor/s due to long and continuous missing data range, and (3) identify a healthy sensor.

• 지구물리와물리탐사
• /
• 제5권3호
• /
• pp.169-177
• /
• 2002

일반 반사법 탐사 모델링에서 효율적인 주파수영역 수치모델링의 실용화를 위해 무엇보다 해결해야할 과제는 파장당 격자수를 줄이는 것이다. 본 연구에서는 이에 착안하여 수치분산 및 수치이방성을 최소화시키면서 한 파장당 필요한 격자수를 줄일 수 있는 가중평균 유한요소법을 개발하였다. 강성행렬과 질량행렬은 네 개의 사각형 유한요소로 확장하였으며, 모든 격자점이 포함되도록 유한요소를 배열하여 조합하였다. 확장된 네 개의 강성행렬과 질량행렬은 가중평균계수를 주어 선형결합하는 방법으로 가중평균하였다. 가중평균계수는 확장된 25점 평균차분법을 사용하여 가중평균계수를 결정하였다. 또한, 정확도 향상은 2차원 균질모델 과 수평층 모델에서 해석해와 한 파장당 4개의 격자점을 준 가중평균 유한요소법 수치해 비교를 통하여 검증하였다. 또한, 석유탐사에서 활용성이 높은 향사구조 모델을 선정하여 이의 반응을 관찰한 결과 지층경계면외에 네 개의 사각형 유한요소들의 구성으로 인한 인위적인 파의 도달이 인식되지 않았다. 따라서, 본 연구에서 고안된 가중평균 유한요소법은 주파수영역에서 폭 넓은 수치모델링연구을 가능하게 할 것이다.

• 한국대기환경학회지
• /
• 제2권1호
• /
• pp.41-54
• /
• 1986

Methods used for averaging PH's of rainwater and site representation have been studied, Statistical analysis was attempted regarding effects of ionic components on PH's utilizing 847 data altogether obtained in two years, 1984 and 1985. The outcome of the study may be assumarized as follows: 1. Methods for Averaging PH Volume weighted method is considered to be acceptable providing that precipitation is measured at the same time when the samples are taken. Without precipitation data a simple averaging method should be the next choice. 2. Site Representation A statistical method used for optimizing a monitoring newtork was applied using the data collected. Because of a limited number of data, no discernible conclusion can be reached suggesting that the method can serve as a good guide when the data base becomes more reliable. 3. A good correlation appears to exist betwen conductivities and ionic components in rainwater. It would, therefore, be possible to certain extend to estimate ionic concentrations from conductivity measurements by correlation equations. 4. The acidity of rainwater is effected by $SO_4^{2-}, NO_3^-, Cl^- and NH_4^+ with SO_4^{2-}$ being the most significant as demonstrated by standardized regression analysis.

• 지구물리와물리탐사
• /
• 제3권2호
• /
• pp.61-69
• /
• 2000

지표 경계 조건은 유한 차분법을 이용한 탄성파 파동 방정식 모델링에서 수치해의 정확성을 떨어뜨리는 한편 포아송 비에 따른 해의 안정성을 제한하는 주 요인이 된다. 본 연구에서는 지표 경계 조건과 같은 Neumann 경계 조건의 처리에 효과적인 적분법(integration method)에 기반 하여 차분식을 유도하고, 이로부터 중간점 차분 기법을 제안하였다. 또한, 개발된 알고리즘을 Lamb의 문제에 적용하여 이론해와 비교함으로써 타당성을 검증하였다.