• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.114-117
• /
• 2002

To develop an effective geometric modeling is essential in order that precise material properties of the 3-D braided composite can be estimated. in this study RVE(representative volume element) which is the smallest volume element representing whole material properties is developed to estimate the mechanical properties of 3-D flat board shaped braided composite using volume averaging method.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.292-295
• /
• 2002

In this paper, an analytical model for the prediction of the elastic properties of multi-axial warp knit fabric (MWK) composites is proposed. The geometric limitation, effect of stitching fibers and design parameters of MWK composites are considered in the model. The elastic behavior of MWK composites was conducted by using an averaging method. The predicted elastic properties are in reasonably good agreement with experimental values. Finally the effect of stitching in the MWK composites are discussed.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.3
• /
• pp.159-165
• /
• 1998

In bitrate control of MPEG-2 TM5, $Q_{j}$, N-act, and mquant, of present macroblock are predicted from those of previous macroblock. It results in poor image quality because of abrups change of them. We proposed a method predicting $Q_{j}$, N-act, and mquant, of present macroblock by averaging those parameters of adjacent previous macroblocks. As a results, it shows improved PSNR compared to bitrate control of MPEG-2 TM5.TM5.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.9 no.2
• /
• pp.61-66
• /
• 1989

Welding residual stress was measured by ultrasonic birefringence technique. Acoustoelastic constant was taken by averaging the values in the literature. The initial birefringence from prefered orientation of grains was measured. The EMAT transducers were used to remove couplant effect. The results show that the distribution and magnitude of welding residual stress from ultrasonic measurement are in good agreements with those from semi destructive hole drilling measurement.

• Journal of applied mathematics & informatics
• /
• v.27 no.5_6
• /
• pp.1165-1176
• /
• 2009

This paper is concerned with the interval oscillation of the second order nonlinear ordinary differential equation (r(t)|y'(t)|$^{{\alpha}-1}$ y'(t))'+p(t)|y'(t)|$^{{\alpha}-1}$ y'(t)+q(t)f(y(t))g(y'(t))=0. By constructing ageneralized Riccati transformation and using the method of averaging techniques, we establish some interval oscillation criteria when f(y) is not differetiable but satisfies the condition $\frac{f(y)}{|y|^{{\alpha}-1}y}$ ${\geq}{\mu}_0$ > 0 for $y{\neq}0$.

• The Pure and Applied Mathematics
• /
• v.10 no.1
• /
• pp.49-56
• /
• 2003

For (equation omitted) be an ordered $\ell$(t)-tuple of numbers in｛1,2, …,$\ell$｝and let Tt be chosen from a finite composition of orthogonal projections (equation omitted) acting on the normed linear space $C_1$(X) to closed convex subset $S(fi_{j}\;^{t})$ respectively. In this paper, we study the convergence of the sequence (equation omitted) where (equation omitted).

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.26-28
• /
• 2007

Design equations of II-SEPIC (Isolated Inverse-SEPIC) are derived and its dynamic model is also made using state-space averaging method in this paper. II-SEPIC is comprehensively investigated through the frequency response analysis, compared with those of I-SEPIC (Isolated SEPIC).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.198-203
• /
• 1993

In this study, byusing EMAT(Electro Magnetic Acoustic Transducer) the artificial slit is installed on 12B-SUS pipe test piece. By mading 4 cycle SH-bust wave (EMA) incidence to 45 .deg. angle, the signaldata of pulse, which is recevied from EMAT translated intodigital-signal-processing-method SSP and Deconvolution method by using FACOM. Results of these indicated that (1) this method of this study shows exellent result more than Ultrasonic testing method; (2) noise is well removed by SSP using signal dataa and resolving power and S/N ratio are advanced; (3) regradless of Ultrasonic wave, whichhas properties of generalstainless steel is generated into multiscattering and reflection phenomena, the resolving power of more than two times is progressed by being translated into Decon-volution method; and (4) as addition-averaging-processing number is increaing, the resolving power and S/N ratio are improved and the satisfactory signal is obtained.

• Journal of Korea Multimedia Society
• /
• v.20 no.6
• /
• pp.865-872
• /
• 2017

Recent advance in electronics and scintillators makes it possible to utilize the time-of-flight (TOF) information in improving image reconstruction of positron emission tomography(PET). In this paper, we propose a TOF-based fast image reconstruction method for PET. The proposed method uses the deconvolution of TOF data for each angle view and the rotational averaging of deconvolved images. Simulation results show an improved performance of the proposed method, as compared with filtered backprojection (FBP) method, TOF-FBP, and TOF version of expectation-maximization(EM) methods. Simulation results also show a great potentiality of the proposed method in limited angle tomography applications.

• Journal of Power Electronics
• /
• v.13 no.5
• /
• pp.814-828
• /
• 2013

The LCL resonant inductive power transfer (IPT) system is increasingly used because of its harmonic filtering capabilities, high efficiency at light load, and unity power factor feature. However, the modeling and controller design of this system become extremely difficult because of parameter uncertainty, high-order property, and switching nonlinear property. This paper proposes a frequency and load uncertainty modeling method for the LCL resonant IPT system. By using the linear fractional transformation method, we detach the uncertain part from the system model. A robust control structure with weighting functions is introduced, and a control method using structured singular values is used to enhance the system performance of perturbation rejection and reference tracking. Analysis of the controller performance is provided. The simulation and experimental results verify the robust control method and analysis results. The control method not only guarantees system stability but also improves performance under perturbation.